Laser Pegs C1200 HELICOPTER AGES 5+ Assembly Instructions Manual

C1200

30 Models+

• 36 Laser Pegs

• 169 Construction parts

• Triangle Power Base

• Instruction Manual

Requires 3 AA Batteries

Batteries NOT

Included

Laser Pegs® Parts List

Each Laser Peg® is color coded on the circuit board inside each shape.

Construction Parts List

www.LaserPegs.com

Color Code

SQUARE

PEG

45° PEG

WHEEL PEG

Stackable

STRAIGHT

T-PEG

STRAIGHT

Y PEG

LIGHTED

CONSTRUCTION SET INCLUDES:

Any creation you can build

SQUARE M-M PEG

STRAIGHT M-M PEG

Please read this manual before you begin! Failure to follow this manual’s instructions may result in damage to the 3D Lite Board®, AC Adapter and/or Laser Pegs®. Not adhering to these instructions will void the manufacturer’s warranty. The packaging must be kept because it contains important information.

x15

x30

x14

x11

x15

x2 x2

x2x2

EN71, RoHS COMPLIANT

This product complies to

all safety requirements

of ASTM F 963

TRUSS PEG

This manual is copyright and cannot be reproduced or used online without Laser

LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.com

WARNING:

CHOKING HAZARD-Small parts.

Not for children under 3 yrs. Do not submerge in water.

AGES 5+

HELICOPTER

Sound Activated

Triangle Power Base

To construct with Laser Pegs®, slide two pieces together to form a connection. Slide each piece on and o smoothly. To build away from the Triangle Power Base, use the peg cord in one of the top three peg holes to illuminate your model! The 90° pegs are essential to construction but they DO NOT ILLUMINATE.

Connecting Pegs

Environmental Phenomena

* The unit may malfunction if subjected to radio-frequency interference. It SHOULD revert to normal operation when the interference stops. If not, it may become necessary to turn the power o and back on, or remove and reinstall the batteries.

* In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the devise by removing and reinstalling the batteries.

WARNING: STROBE LIGHTS MAY CAUSE SEIZURES

WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more pegs you use, the quicker you will deplete your battery power! As the power weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically the reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs® are not broken, they just need stronger batteries or an AC Adapter. You have 3 simple options...

1. Use a 5-volt AC Adapter –available from www.LaserPegs.com

2. Change the batteries.

3. Use high quality batteries. They will last a little longer, but they will still deplete rapidly the more laser pegs you connect!

Using an AC Adapter

Remove all batteries from Laser Pegs® power base before using the 5-volt AC adapter.

When using an AC Adapter, NEVER place the adapter plug into the Triangle Power Base top peg holes.

*To avoid short-circuits, keep metal objects and other unauthorized materials from obstructing the peg holes.

The AC adapter and the Triangle Power Base are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they must not be used until the damage has been repaired.

Never connect more than 200 Laser Pegs® when using a 5-volt (2000mA) AC Adapter.

DO NOT SUBMERGE IN WATER

Please dispose of batteries properly as per state and local regulations.

1. Remove the three (3) screws.

2. Place three (3) AA batteries in the correct position - as displayed inside the Triangle Power Base.

3. Reassemble the Triangle Power Base.

4. Replace the three (3) screws.

5. Push RED Power Button to turn on!

6. Do not mix old and new batteries.

7. Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel-cadmium, NiMH) batteries!

8. Exhausted batteries are to be removed from the Triangle Power Base.

9. Never connect more than 200 Laser Pegs®

10. Non-rechargeable batteries are not to be recharged.

11. Rechargeable batteries are only to be recharged under adult supervision.

12. Rechargeable batteries are to be removed from the toy before being recharged.

13. Batteries are to be inserted with the correct polarity.

14. The supply terminals are not to be short circuited.

15. DO NOT THROW BATTERIES INTO FIRE!

Replacing Batteries

Requires (3AA) Batteries

Red Power Button

SOUND/ON/FLASH/FLASH FASTER

Peg Holes

AC Adapter Connection

Push Red Power Button to turn on/o

Push Red Power Button to cycle through 4 dierent light settings.

The toy is not to be connected to more than the recommended number of power supplies

Add 3-AA Batteries

3-AA Batteries

Remove LR-44 Batteries

The LR-44 batteries are only for the “Try-Me” function, they should be removed from the Triangle Power Base and replaced with 3 - “AA” batteries before giving it to the child.

Try-Me function contains

3xL1154F/LR44

Warning: This product contains a

button battery. If swallowed, it could cause severe injury or death in just 2 hours. Seek medical attention immediately.

ASSAULT HELICOPTER: Although primarily used for warfare, this powerful aircraft is also used for ghting something else...forest res.

STEP

Model

Diculty Level

ASSAULT HELICOPTER

COMBINE

PAR TS

FLIP MODEL

OVER

ROTAT E MODEL

www.LaserPegs.com

STEP

www.LaserPegs.com

STEP

C D

STEP

www.LaserPegs.com

STEP

BUILD 2 SETS

+ 8 hidden pages

Laser Pegs C1200 HELICOPTER AGES 5+ Assembly Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual