Laser Pegs 12 in 1 Animals Construction Set Model Instructions

Please read this manual before you begin!

Failure to follow this manual’s instructions may

result in damage to the Triangle Power Base, AC

Adapter and/or Laser Pegs®. Not adhering to these instructions will void the manufacturer’s warranty. The packaging must be kept because

it contains important information.

This manual is copyright and cannot be reproduced or used online without Laser

#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures

LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.com

Compatible with other construction kits

Each Laser Peg® is color coded on the circuit board inside each shape. There is No LED In The 90 Degree Peg.

www.LaserPegs.com

Color Code

WARNING:

CHOKING HAZARD-Small parts.

Not for children under 3 yrs. Do not submerge in water.

All additional model instructions can

be downloaded at www.LaserPegs.com

MODEL INSTRUCTIONS

Construction Compatible

Laser Pegs

link that

allows you to connect to

other construction kits.

Laser Pegs® Stackable

EN71, RoHS COMPLIANT

This product complies to

all safety requirements

of ASTM F 963

LIGHT UP

CONSTRUCTION SET INCLUDES:

• 20 Laser Pegs®

• 102 Construction Parts

- Laser Pegs® Peg Cord

• Triangle Power Base

• Instruction Manual

Requires 3-AA Batteries

Batteries NOT

Included

Laser Pegs® Parts List

Construction Parts List

12 Models+

ANY CREATION YOU CAN BUILD

There is No LED In The 90 Degree Peg

45° PEG

STACKABLE

STRAIGHT

T-PEG

SQUARE

M-M PEG

SQUARE

PEG

TRIANGLE PEG

TRIDENT PEG

90° PEG

TRUSS PEG

US Patent #7,731,558

www.LaserPegs.com

Laser Pegs® CARES

Questions? Comments?

For additional compliance info:

1-866-432-3735

Contact: Support@LaserPegs.com

To construct with Laser Pegs®, slide two pieces together to form a connection. Slide each piece on and o smoothly. The 90° Pegs are essential to construction but they DO NOT LIGHT UP.

Connecting Pegs

WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more pegs you use, the quicker you will deplete your battery power! As the power weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically the reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs® are not broken, they just need stronger batteries or an AC Adapter. You have 3 simple options...

1. Use a 5-volt AC Adapter –available from www.LaserPegs.com

2. Change the batteries.

3. Use high quality batteries. They will last a little longer, but they will still deplete rapidly the more laser pegs you connect!

Using an AC Adapter

Remove all batteries from Laser Pegs® power base before using the 5-volt AC adapter.

When using an AC Adapter, NEVER place the adapter plug into the Triangle Power Base top peg holes.

*To avoid short-circuits, keep metal objects and other unauthorized materials from obstructing the peg holes.

The AC adapter and the Triangle Power Base are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they must not be used until the damage has been repaired.

Never connect more than 200 Laser Pegs® when using a 5-volt (2000mA) AC Adapter.

Please dispose of batteries properly as per state and local regulations.

1. Remove the three (3) screws.

2. Place three (3) AA batteries in the correct position - as displayed inside the Triangle Power Base.

3. Reassemble the Triangle Power Base.

4. Replace the three (3) screws.

5. Push RED Power Button to turn on!

6. Do not mix old and new batteries.

7. Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel-cadmium, NiMH) batteries!

8. Exhausted batteries are to be removed from the Triangle Power Base.

9. Never connect more than 200 Laser Pegs®

10. Non-rechargeable batteries are not to be recharged.

11. Rechargeable batteries are only to be recharged under adult supervision.

12. Rechargeable batteries are to be removed from the toy before being recharged.

13. Batteries are to be inserted with the correct polarity.

14. The supply terminals are not to be short circuited.

15. DO NOT THROW BATTERIES INTO FIRE!

Replacing Batteries

Environmental Phenomena

* The unit may malfunction if subjected to radio-frequency interference. It SHOULD revert to normal operation when the interference stops. If not, it may become necessary to turn the power o and back on, or remove and reinstall the batteries.

* In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the devise by removing and reinstalling the batteries.

WARNING: STROBE LIGHTS MAY CAUSE SEIZURES

DO NOT SUBMERGE IN WATER

Remove the 3 Phillips head screws

3-AA Batteries

Remove the three Phillips head screws with a 4mm screw driver.

Requires (3AA) Batteries

ANIMALS

Laser Pegs®

Peg Cord

Ages 5 +

Red Power Button

SOUND/ON/FLASH/FLASH FASTER

Peg Holes

AC Adapter Connection

Push Red Power Button to turn on/o

Push Red Power Button to cycle through 4 dierent light settings.

Sound Activated

Triangle Power Base

Model

Diculty Level

RHINOCEROS

STEP

RHINOCEROS: An endangered, heavy mammal with horns on its nose and thick folded skin whose fossilized skull was once mistaken for a dragon’s. Unfortunately, the Western Black Rhinoceros was declared extinct in

US Patent #7,731,558

www.LaserPegs.com

MADE IN CHINA

FLIP

kids.nationalgeographic.com

STEP

US Patent #7,731,558

www.LaserPegs.com

FLIP

STEP

+ 5 hidden pages

Laser Pegs 12 in 1 Animals Construction Set Model Instructions

Specifications and Main Features

Frequently Asked Questions

User Manual