Please read this manual before you begin!
Failure to follow this manual’s instructions may
result in damage to the Triangle Power Base, AC
Adapter and/or Laser Pegs®. Not adhering to
these instructions will void the manufacturer’s
warranty. The packaging must be kept because
it contains important information.
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures
LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.com
Compatible with other construction kits
Each Laser Peg® is color coded on the circuit board inside
each shape. There is No LED In The 90 Degree Peg.
Laser Pegs
®
link that
allows you to connect to
other construction kits.
www.LaserPegs.com
Color
Code
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 yrs.
Do not submerge in water.
All additional model instructions can
be downloaded at www.LaserPegs.com
MODEL INSTRUCTIONS
Construction Compatible
Laser Pegs® Stackable
EN71, RoHS COMPLIANT
This product complies to
all safety requirements
of ASTM F 963
1290
HEAVY DUTY
For Boys And Girls
Ages 5 And Up
LIGHTED
CONSTRUCTION SET INCLUDES:
• 29 Laser Pegs®
• 94 Construction parts
• Laser Pegs® Peg Cord
• Triangle Power Base
• Instruction Manual
Requires 3-AA Batteries
Batteries NOT
Included
Laser Pegs® Parts List
Construction Parts List
SQUARE
PEG
STACKABLE
24 Models+
ANY CREATION YOU CAN BUILD
There is No LED In The 90 Degree Peg
x4
x4
x3
x4
x12
x8
x12
x4
x2
Y PEG
SQUARE
M-M PEG
x2
x2
STRAIGHT
T PEG
90° PEG
x4
x6
45° PEG
WHEEL PEG
TRUSS PEG
STRAIGHT
PEG
TRIANGLE PEG
x2x2x1
x1
Triangle Power
Base
Laser Pegs®
Peg Cord
x2
x2
x4
x5
x4
x1
x1
x4
x2
x2
x2
x2
x4
x5
x2
x2
x2
x4
To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and o smoothly. The 90° Pegs are
essential to construction but they DO NOT LIGHT UP.
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures
LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.com
www.LaserPegs.com
Connecting Pegs
Red
Power Button
OFF/ON/FLASH
Peg Holes
AC Adapter
Connection
Using an
AC Adapter
Remove all batteries
from Laser Pegs® power
base before using the
5-volt AC adapter.
When using an AC
Adapter, NEVER
place the adapter
plug into the Triangle Power Base
top peg holes.
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs®
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options...
1. Use a 5-volt AC Adapter –available from www.LaserPegs.com
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!
*To avoid short-circuits, keep metal objects and
other unauthorized materials from obstructing
the peg holes.
The AC adapter and the Triangle Power Base are to be regularly examined for
damage to the cord, plug, enclosure and other parts, and in the event of such
damage, they must not be used until the damage has been repaired.
Never connect more than 200
Laser Pegs® when using a 5-volt
(2000mA) AC Adapter.
Replacing Batteries
1. Remove the three (3) screws.
2. Place three (3) AA batteries in the correct
position - as displayed inside the Triangle
Power Base.
3. Reassemble the Triangle Power Base.
4. Replace the three (3) screws.
5. Push RED Power Button to turn on!
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel-cadmium,
NiMH) batteries!
8. Exhausted batteries are to be removed
from the Triangle Power Base.
9. Never connect more than 200 Laser Pegs®
10. Non-rechargeable batteries are not to be
recharged.
11. Rechargeable batteries are only to be
recharged under adult supervision.
12. Rechargeable batteries are to be removed
from the toy before being recharged.
13. Batteries are to be inserted with the
correct polarity.
14. The supply terminals are not to be short circuited.
Push Red
Power Button
to turn on/o
Push Red Power Button to
cycle through 3 dierent
light settings.
Add 3-AA Batteries
3-AA Batteries
BULLDOZER - With a weight of over 183 tons, the ACCO Super Bulldozer is the largest
bulldozer ever built.
1
STEP
2
STEP
Model
Diculty
Level
BULLDOZER
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
3
STEP
4
STEP
5
STEP
6
STEP
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
9
STEP
8
STEP
7
STEP
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
10
STEP
11
STEP
12
STEP
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
ATTACH MODEL TO THE TRIANGLE
POWER BASE WITH THE PEG CORD
13
STEP
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
All additional model instructions can
be downloaded at www.LaserPegs.com
MODEL INSTRUCTIONS
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
MAIN BATTLE
TANK
SNOWCAT
FIRE TRUCK
CRANE TRUCK
AMPHIBIOUS
VEHICLE
ROAD GRADER
FIELD PLOW
CONSTRUCTION CLAW
CRANE
AMBULANCE
NAVAL HOVERCRAFT
FARM
COMBINE
CAB-OVER
STEAMROLLER
FORKLIFT
DIESEL
WRECKER
BOX TRUCK
STORM CHASER
HUMVEE
DUMP TRUCK
BULLDOZER
STREET SWEEPER
WRECKING BALL CRANE
MOON TRANSPORT
VEHICLE
EXCAVATOR
Loading...