Laser Pegs 1000 Instructions For Use Manual

Please read this manual before you begin!
Failure to follow this manual’s instructions may
result in damage to the Triangle Power Base, AC
Adapter and/or Laser Pegs®. Not adhering to
these instructions will void the manufacturer’s
warranty. The packaging must be kept because
it contains important information.

To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and o smoothly. To build away from the
Triangle Power Base, use the Peg Cord in one of the top three peg holes to
light up your model! The 90° Pegs are essential to construction but they DO
NOT LIGHT UP.

This manual is copyright and cannot be reproduced or used online without Laser

Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures

LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: [e-mail]

Compatible with other construction kits

Each Laser Peg® is color coded on the circuit board inside
each shape. There is No LED In The 90 Degree Peg.

Laser Pegs

®

link that

allows you to connect to

other construction kits.

Triangle Power

Base

www.LaserPegs.com

Laser Pegs®

Peg Cord

Color
Code

Connecting Pegs

Push button to
turn on/o

Push Red Power Button to
cycle through 3 dierent
light settings
OFF/ON/FLASH/FLASH FASTER.

Red
Button Power

Peg Holes

AC Adapter
Connection

Connect Laser Pegs® TRIANGLE POWER BASE

To build away from the Laser Pegs®
Triangle Power Base use the Peg
Cord in one of the top three holes to
illuminate your model!

Using an
AC Adapter

Remove all batteries
from Laser Pegs® Power
Base before using the
5-volt AC adapter.

When using an AC
Adapter, NEVER
place the Adapter
plug into the Tri­angle Power Base
top peg holes.

Connect cord to model.

WARNING:

CHOKING HAZARD-Small parts.

Not for children under 3 yrs.
Do not submerge in water.

All additional model instructions can

be downloaded at www.LaserPegs.com

MODEL INSTRUCTIONS

Construction Compatible

Laser Pegs® Stackable

When you remove a peg from another
peg or model DO NOT PULL ON CORD!

Replacing Batteries

EN71, RoHS COMPLIANT

This product complies to

all safety requirements

of ASTM F 963

WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will light up (typically
the reds and yellows) and some won’t. When the Laser Pegs® dim, the Laser Pegs®
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options...

1. Use a 5-volt AC Adapter –available from www.LaserPegs.com

2. Change the batteries.

3. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!

*To avoid short-circuits, keep metal objects and
other unauthorized materials from obstructing
the peg holes.

The AC Adapter and the Triangle Power Base are to be regularly examined for
damage to the cord, plug, enclosure and other parts, and in the event of such
damage, they must not be used until the damage has been repaired.

1000

For Boys And Girls

Ages 5 And Up

LIGHTED

CONSTRUCTION SET INCLUDES:

• 38 Laser Pegs®

• 159 Construction parts

• Laser Pegs® Peg Cord

• Triangle Power Base

• Instruction Manual

Requires 3-AA Batteries

Batteries NOT

Included

Laser Pegs® Parts List

Construction Parts List

SQUARE

PEG

STACKABLE

30 Models+

ANY CREATION YOU CAN BUILD

There is No LED In The 90 Degree Peg

Never connect more than 200
Laser Pegs® when using a 5-volt
(2000mA) AC Adapter.

45° PEG

WHEEL PEG

Y PEG

STRAIGHT

T-PEG

SQUARE
M-M PEG

90° PEG

x7

x8

x3

x2

x4

x4

x4

x6

x6

x6

x7

x7

x14

x16

x10

x10

x10

x20

x4

x4

x4

x4

x5

x5

x5

x2

x2

x2

x8

x2

x2

x2

x2

1. Remove the three (3) screws.

2. Place three (3) AA batteries in the correct
position - as displayed inside the Triangle
Power Base. (Batteries are to be inserted
with the correct polarity.)

3. Reassemble the Triangle Power Base.

4. Replace the three (3) screws.

5. Push RED Power Button to turn on!

6. Do not mix old and new batteries.

7. Do not mix alkaline, standard (carbon­ zinc), or rechargeable (nickel-cadmium,
NiMH) batteries!

8. Exhausted batteries are to be removed
from the Triangle Power Base.

9. Never connect more than 200 Laser Pegs®

10. Non-rechargeable batteries are not to be
recharged.

11. Rechargeable batteries are only to be
recharged under adult supervision.

12. Rechargeable batteries are to be removed
from the toy before being recharged.

13. The supply terminals are not to be short­ circuited.

Add 3-AA Batteries

3-AA Batteries

Remove LR-44 Batteries

The LR-44 batteries are only for the
“Try-Me” function, they should be re­moved from the Triangle Power Base
and replaced with 3 - “AA” batteries
before giving it to the child.

SPIDER - The smallest spider in the world, the Patu Marplesi, is not even half a millimeter in size.

Model

Diculty
Level

SPIDER

1

STEP

2

STEP

3

STEP

4

STEP

5

STEP

6

STEP

A

Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.

US Patent #7,731,558

www.LaserPegs.com

BACK LEGS

FRONT LEGS

7

STEP

8

STEP

9

STEP

10

STEP

18

STEP

19

STEP

11

STEP

14

STEP

12

STEP

16

STEP

15

STEP

13

STEP

17

STEP

C

B

FLIP