Laser Optronix GyroView 3 User Manual

GyroView 3 Manual

Laseroptronix Telephone office 0046-70 714 04 70
Enhagsslingan 23
187 40 Täby Sweden
E-mail [e-mail] www.laseroptronix.se

Page 1

Gyroview 3 the 16x40 Gyro

BINOCULAR WITH ACTIVE IMAGE STABILIZATION

GyroView 3 Manual

Laseroptronix Telephone office 0046-70 714 04 70
Enhagsslingan 23
187 40 Täby Sweden
E-mail [e-mail] www.laseroptronix.se

Page 2

IMPORTANT INFORMATION

Read prior to activation

You have just purchased a complicated electro mechanical device. To operate it properly, please
read this manual carefully. Here are
some common precautions that must be noted.

•NEVER hit the unit while operating or being transported

•NEVER transport the unit without the case

•NEVER disassemble the unit. This device contains high speed rotating parts, which may be
hazardous to you!

•NEVER engage the stabilizing mode while the power supply control indicator is not glowing or
less than 1 minute after activating the unit

•NEVER turn off the unit while stabilizing mode is engaged

•NEVER reverse the polarity of a battery

In operation smart users do following

•ALWAYS remove batteries when not in use for a long period

•ALWAYS keep the objective lenses covered when not in use

•ALWAYS store in a warm dry place when not in use

Features of the Gyroview 16x40 Gyro binoculars

•Stabilized image by high sped gyro system ritating at 12000-14000 RPM

•Rigid construction

•Dual eye pieces

•Diopter adjustment for booth eye pieces

•Value priced 70% below competition

•Textile bag and maintenance equipment in the bag

•Water Resistant IP 44 level ( We have a IP 67 water proof model on request )

•Night Vision eyepieces and adapters (optional)

•Operation on integrated batteries or external power source

GyroView 3 Manual

Laseroptronix Telephone office 0046-70 714 04 70
Enhagsslingan 23
187 40 Täby Sweden
E-mail [e-mail] www.laseroptronix.se

Page 3

CONTENTS

1. Brief description

2. Appearance of the device

3. Technical characteristic

4. Supplied accessories

5. Operation instructions

5.1. Preparing the device for operation without image stabilization

5.2. Preparing the device for operation with image stabilization

5.3. Preparing the device for operation from on- board source

6. Storage and maintenance instructions

7. Trouble shooting

8. Warranty

9. Customer Support

BEFORE USE CAREFULLY READ ALL THE INSTRUCTIONS!

FAILURE TO OBEY THE INSTRUCTIONS WILL VOID THE WARRANTY!

1. BRIEF DESCRIPTION
Gyro view 16x40GR Gyro Stabilizing Binoculars is a modern,universal optical device
designed for observation and tracking of distant objects and serve both amateur and professional
needs:

•Observation aboard aircraft, land vehicles, boats or othermoving platforms

•Law enforcement and security

•Search and rescue

•Military

•Space

•Used by coast guard and naval aviation for SAR applications in several countries

•Active stabilizzation and can not be compared to other solutions based on flexible suspended
prism optics whichg do not work on boats and in aircrafts in a useable way

The device incorporates the image stabilization technology, which enables the user to observe distant
objects from moving and nonmoving platforms without degrading of the image resolution because of jolt or
normal hand tremors

Combining fully coated, computer designed optics with high- speed internal gyrostabilizing system,

GW 16• 40GR is the ultimate instrument for long- range observation, tracking and surveillance. High

magnification, easy to carry and handle allow shake free observation under any demanding
conditions.