LaserLyte UTA-DB User Manual

L

ASER

L

YTE

L

ASER

L

YTE

L

ASER

L

YTE

Auto-Off Feature:

5 min.
6 min.

L

ASER

L

YTE

L

ASER

L

YTE

• After 5 minutes in any mode, warning mode pulse will activate.

• After 1 minute in warning pulse mode, laser will turn off.

• Press the switch during warning pulse for laser reset.

5 min.

Batteries: 3 x 392 batteries

• Batteries can be changed with laser installed on gun!

• Remove battery cover

• Insert 3 x 392 batteries (+ side up).

• Tighten down the battery cover, and check periodically.

®

• Fits Diamondback Pistols:

- DB380

Off

- DB9

• Ergonomic activation

• Dual Modes: pulse and constant on

• Auto-Off feature

UTA-DB

REV813

• Quick and Easy Installation

®

Diamond Back® .380 & 9mm

L

ASER

L

YTE

L

ASER

L

YTE

L

ASER

L

YTE

L

ASER

L

YTE

L

ASER

L

YTE

L

ASER

L

YTE

380

J1

U1

C1

S1

L

ASER

L

YTE

L

ASER

L

YTE

L

ASER

L

YTE

Activation:

L

ASER

L

YTE

L

ASER

L

YTE

L

ASER

L

YTE

L

ASER

L

YTE

L

ASER

L

YTE

.380 9mm

UTA-DB

* Read instructions completely before installing your laser.
Failure to do so may result in damage to your laser or firearm.

Installation:

•

•

UNLOAD FIREARM.

Attach danger label to side of gun near laser with arrow pointing

toward front sight

1

Place small button provided into button hole in left-side of laser body shell.

2

Place left-side of laser body shell on gun, ensuring proper button placement.

3

Move pre-assembled right-side laser body shell on top of trigger guard and
left-side and gently squeeze both sides together.
ENSURE PROPER BUTTON PLACEMENT.

4

5

the larger .050 hex key provided. Tighten screws until snug.

From left side (non-battery cover side), insert two 1/2” hex head screws using

Installation: •

1 2

UNLOAD FIREARM

4

3

5

Mounting on other gun: • UNLOAD FIREARM

1

Uninstall laser from gun.

2

Unscrew the Phillips Head Screw and remove Master Module.

3

Put long button in button hole. Put Master Module in place. Put Phillips
Head Screw back in place. Re-attach laser to gun.

2 3

380

*Note

Remove

Phillips Head

Screw

*Note:
Please ensure the
correct Laser body is
being installed on the
proper corresponding
caliber pistol.

This laser has ambidextrous activation.

1

Press once turns laser on: constant or pulse

2

Press and hold for 5 seconds to change mode.
Second press turns laser off.

3

5 sec.

ON/OFF

ON/OFF

or

ON/OFF

1 2 3

ON/OFF

or

Laser Sight In:

1

Use the provided .035 hex key to adjust the sight.

2

Always end adjustments on a clockwise turn.

3

Make final adjustments at shooting range.

1 3

2

Windage

Screw

Windage

right

left

Elevation

down

up

ON/OFF

Moving

Laser

Dot