LaserLyte LT-LR User Manual

Training with the LT-LR will improve:

®

• Trigger Control

• Unsighted Fire/Pointed Shoot

• Shooting from the holster

• Precision Shooting

• Unorthodox Shooting Positions

WARRANTY:

Three Year Limited

Warranty.

DANGER

LASER LIGHT AVOID DIRECT EYE EXPOSURE

POWER OUTPUT < 5mw WAVELENGTH 630-670mm

CLASS IIIa PRODUCT

30 N. Alamos Drive - Cottonwood, AZ 86326

Phone [phone] - Fax [phone]

www.LaserLyte.com

• Fits all .22 caliber firearms

• Save money on ammunition

• Have fun training anywhere

• Laser dot shines briefly when dry-firing

LT-TR

®

®

REV 0414

22 Caliber Laser Trainer

Twist the two halves of the laser all the way together.

LT-LR

LT-LR Adapter Screw Hex Key

THE SOUND ACTIVATED SWITCH IS ALWAYS LISTENING

•

THE BATTERIES ARE ALREADY INSTALLED, YOU MUST REMOVE THE

•

PLASTIC INSULATOR BEFORE OPERATION. SEE BATTERY SECTION
OF INSTRUCTIONS.

Installation:

1

UNLOAD YOUR FIREARM!

2

Insert screw through adapter and thread into taper of trainer.

3

Tighten or loosen screw for 22 caliber fit.
TURN ON:

4

5
6

7

TURN OFF:

Twist the other direction about 2-3 times. Check if it
is off by tapping the LT-LR gently on a hard surface like a table
or a ring.

Gently press the trainer into the muzzle of the firearm.
Ready your firearm and pull trigger to fire red laser dot.

(LaserLyte recommends the use of snap caps.)
When removing from your firearm, pull straight out!
Do not twist! Ensure all parts are out of barrel.

2

4

5

6

7

Correct Removal No

Batteries: (1) CR1632

3

ON

OFF

1

Unscrew the two sides of laser body.

Remove battery.

2

3

Install new battery.

Tighten the two sides of laser body.

4

Remove & discard
Insulator before installation.