Laser3d CG7 Cravo User Manual

CG7 Cravo User Manual

CG7 CRAVO Instruction Manual

CONTENTS

Page 1 - Contents
Page 2 - Introduction
Page 3 - CG7 Specification
Page 4 - Quick Assembly Overview
Page 5 - Component List
Page 6 - Layout Examples
Page 7 - Case Orientation
Page 8 - Leg/Feet Assembly
Page 9 - TFX Layout - Panel Assembly
Page 11 - M-ITX Hardware
Page 12 - Fan and Storage Brackets
Page 14 - TFX Layout Build Complete
Page 15 - DC-ATX Layout - Panel Assembly
Page 16 - AC-DC PSU Installation
Page 18 - PSU Adapter Plates
Page 19 - M-ATX Motherboard Limitations
Page 20 - CPU Cooler and Fan Clearances
Page 21 - Lazer3D Products

PLEASE READ THESE INSTRUCTIONS

CAREFULLY BEFORE ASSEMBLING THE CASE

NOTE:
Peel off protective film from BOTH sides of
each panel before assembling the case.

Page 1

INTRODUCTION

Inspired by the slim tower workstations of the OEMs, the CG7 Cravo
turns the concept into an accessible format that can be customizable to
your specific workload.

The CG7 is an compact case with great CPU cooling capabilities for
its size. Aimed at visual professionals and artists, this slim tower have
direct air intake on CPU, GPU and PSU making it ideal for constant
heavy load. Support for low profile GPUs makes it compatible with most
entry level workstation cards as well as mid range gaming cards.

The CG7 is a duo layout case that is easily adapted to slim micro
atx motherboard. This layout allows for multiple low profile PCI cards
as well as extra ram, useful for a wide range of workloads in a very
compact package.

Last but not least, the CG7 is a very home/office friendly pc case,
with a subtle look to match your environment.

SFF COMMUNITY

If you want to get involved in the SFF (small form factor) community head

over to: www.smallformfactor.net/forum The birthplace of the LZ7 and many

other amazing projects, build logs and SFF news, its a great place to talk about

compact tech with other like minded enthusiasts, see you there!

Page 2

SPECIFICATION

Page 3

QUICK ASSEMBLY OVERVIEW

Page 4

COMPONENT LIST

WARNING: The case is not at full strength until fully built,

please take care when attaching the first panels.

WARNING: Do not over-tighten the screws when securing
the panels as this can reduce thread life.

Page 5

LAYOUT EXAMPLES

The CG7 features a unique dual layout design that can be configured
with either a TFX power supply and M-ITX motherboard, or DC-DC
power supplies and limited size M-ATX motherboards (please see
page 19 for size restrictions). Below are some example layouts of
how the system can be configured:

Page 6

ASSEMBLY INSTRUCTIONS

Plan Your Build With Care Ahead of Assembly!

This case

comes with

2 Rear panels:

One for Mini ITX + TFX PSU and one for micro ATX + DC-ATX PSU (DC-DC).

Choose case orientation
before building, as it is
easier to attach the case
feet prior to assemblying
the system.

Page 7