- Only use a water-dampened soft-cloth to clean the surface of this product.
- The following will damage this product: any liquid such as water or moisture, extreme
heat; cold; humidity, dusty or sandy environments.
- Only place this device on stable surfaces and ensure that any attached cables are secure
and will not cause the device to fall.
- It is recommended to thoroughly charge for the first time overnight. Subsequent charges
can be as needed. During charging, or extended use, the product may become warm.
- There are no user serviceable parts in this product.
- Un-authorized attempts to dismantle or repair this product will void product warranty and
may result in dangerous electric shock.
- Do not use this product if you are in control of dangerous machinery such as a motor
vehicle.
- Remove any power or data cords by pulling them from the plug and not the cord.
- Using this device near other electronic devices may cause interference.
- Do not use this product in electrical storms.
DVB-T DIGITAL TV RECEPTION NOTES (AUSTRALIA)
Utilising the latest in DVB-T tuning technology, this 7” portable digital TV will give you crystal
clear images and has been tuned to receive all available free to air digital television signals
broadcast in Australia (and other countries) subscribing to the DVB-T channel spectrum.
However being a portable device (with relatively less power than a set top box or home
digital television), reception for this device is best when in metropolitan areas or places of
known good reception. For indoor use, we recommend using the MCX to IEC adaptor or
placing the device near a window. Trying to use the device to watch TV whilst travelling (in a
car, train, bus, etc) is not recommended however watching content from a USB stick or SD
memory card will have no problem.
For further information on Digital TV coverage in your area go to:
http://myswitch.digitalready.gov.au/
3
Page 4
DVBT-7TOUCH USER MANUAL
WHAT’S IN THE BOX
7” DVB-T portable Digital TV
240 volt Power Adaptor with Australian / New Zealand plug,
External Antenna for extended range,
AV cable (RCA composite with L/R audio to 3.5mm phono,
Remote control,
MCX-to-IEC connector (allows connection to a standard TV wall socket)
PRODUCT CONNECTION AND USE
4
Page 5
DVBT-7TOUCH USER MANUAL
Button name
Function
1 POWER
Turn Power on or off (standby mode)
2
MUTE
Mute
sound
3
SOURCE
(not available)
4 PREVIEW
(not available)
5 AUDIO
Toggle language or mono/stereo sound
6
ENTER
Confirm selection
7
EXIT Exit the current setup
8
Number Pad
Select TV channel by using the numbers.
9 RECALL
(not available)
10 OK Select
the highlighted item
11
VOL
Select volume up or move the cursor right
12
VOL
Select volume down or move the cursor
13 CH +
Select channel up or move the cursor up
14 CH -
Select channel down or move the cursor
15 Home
Go to home screen
16
INFO
Display digital TV system information
17
EPG Electronic Program Guide
18
MENU
Enter the setup menu
19 MANUAL
(not available)
20 AUTO
To scan and store channels automatically
21
PLAY/PAUSE
To play or pause
recorded content
22
FR Fast Rewind
23
FF Fast Forward
24 REC
Start recording a TV program or exit
25 Replay
(not available)
26
TTX (
not available)
27 RED BUTTON
Subtitle key
28
GREEN
(
not available)
29
YELLOW
(
not available)
30 BLUE BUTTON
(not available)
OPERATING THE REMOTE CONTROL
1. Installing the battery into the remote control
1.1 Rotate the battery cover towards the ‘open’ arrow position until the cover
can be removed.
1.2 Insert the supplied battery (or replace with a new battery where required).
Please ensure the battery is facing the correct way. (+ sign positive facing up)
1.3 Re-fit the battery cover and rotate to closed position. (This is the installation
process, in reverse)
Note: Ensure the coin cell battery (supplied) is installed into your remote control prior to use.
For best results aim the remote control directly at the touch control pad when in use.
5
Page 6
DVBT-7TOUCH USER MANUAL
Record TV
Channel Up / Down
Volume Up / Down
OK (Confirm)
Menu / Exit
Home
IR Sensor
THE TOUCH-CONTROL PANEL
MEDIA HOT KEYS
Hot keys allow you to rewind/fast forward, play/pause and go to the previous/next file
when playing video or music files. They can also be used to navigate through the settings
menus. “OK” is used to confirm your selection. The menu button is used to exit from
settings and menu screens.
Next/ Fast forward function.
Play the next file in music playback
Fast forward the scene in movie playback
(Scroll down in the settings menu)
Play/Pause/ Confirm function.
Previous/Fast Forwarding function.
Play the previous file in music playback.
Rewind the scene in movie playback
(Scroll up in the settings menu)
Note: Volume keys can be used to move left and right whilst in the settings menu
6
Page 7
DVBT-7TOUCH USER MANUAL
THE MAIN MENU
Movie
Playback Movies
Music
Playback Music
Photo
View images
TV (DVB-T)
Watch TV (DVB-T)
System Settings
Menu for system settings
WATCHING TV
1. Connecting to power and charging
1.1 Connect the 240v wall power adaptor to the DVB-T unit
1.2 The LED indicator will turn RED when the battery is being charged.
1.3 The LED indicator will turn GREEN when the battery is fully charged.
1.4 It is best to charge for a period of 24 hours before the first use.
Note: The device can be used whilst charging.
2. Slide the power switch to on
3. Select the TV icon and select OK
4. Select the OK button again to enter the channel scanning menu
5. Check your antenna type, language (OSD - On Screen Display language), region
(country), summer zone (day light savings) and channel order (by default sequence
or by logical channel number (LCN)).
6. Then select channel search and select OK
Note 1: Your time zone setting will be automatically updated once the Region setting is
changed and you have started the scan for new TV channels.
Note 2: Pressing OK during viewing will change the aspect ratio. Repeated pressing will
cycle back through these same options.
7
Page 8
DVBT-7TOUCH USER MANUAL
TV SETTINGS
During TV playback press the menu button. Choose between options; program list, subtitle,
antenna selection, channel info, audio, channel search and CH (channel) management
1. Program list: Display channel information, previews the program, and access the
Electronic Program Guide (EPG). Use the volume key to access more information on
the highlighted channels
2. Subtitle: Activate or deactivate the subtitle function.
3. Antenna selection: Select between either the built-in antenna or the external
antenna (extended range)
4. Channel info: Display program information from the current service provider.
5. Audio: Select your audio channel languages for stereo/left/right/3D (on or off) effect
audio channel [English language is set by default]
6. Channel search: Search for all available channels automatically.
7. CH (Channel) management:
7.1 Skip a Channel: This feature temporarily removes the channel from the
program list. Note: Users can restore the channels by deactivating this function.
7.2 Channel Move: This feature allows users to re-order the channel list
(program list) to their requirements. Click the ok button to save your selection.
7.3 Channel delete: This function will permanently delete a channel from the
program list. Note: The channel can only be restored by performing an auto search.
Note: Channel listings will vary between areas. It may be necessary to rescan for new
channels if you have changed location substantially. This device may not receive all channels
in all areas. If reception is poor, please try to rescan using the external antenna.
RECORDING TV
1. Select the record TV button to start recording the TV program currently in view.
Note: When recording has begun an “REC” icon will appear on the lower right side of
the screen.
Note: Please ensure that your USB flash device or SD Card has been inserted.
2. When ready, press the Record button again to stop recording.
Note 1: Recorded programs will be saved by default to the folder titled “RECORD”.
Note 2: The file name is saved with a default structure for easy reference. This format
consists of the Channel Name + Recorded Date + Recorded Time. For example ABC_
120128_1013
Note 3: The maximum size a saved file can reach is 4GB (due to the FAT/FAT32 file structure)
For example, any recorded file longer than 4GB will be divided into segments no
8
Page 9
DVBT-7TOUCH USER MANUAL
larger than 3.9 GB.
3. Recorded files can then be selected for playback from the Movie section in the main
menu screen.
Important things to keep in mind:
1. 1 GB of memory storage can record approximately 45 minutes of TV programming
2. The file storage system supports FAT/FAT32 formats only
3. To avoid specific related operating problems with your brand of storage device, it is
strongly suggested that USB devices or SD Cards be fully formatted before first use.
MOVIE PLAYBACK
Select the movie icon from the main menu screen. Select the folder and file location for
playback. Select OK to confirm your choice and to begin playback.
Note 1: Only movies can be played back whilst in the movie option section. (Vice versa with
music and image files)
Note 2: All the buttons on the touch panel can be used as control buttons during movie
playback. An explanation of these buttons is briefly shown at the start of each
playback session. Exit and re-enter this feature to repeat the control buttons again if
you have missed them.
Note 3: Supported video files must be equal to or below 720 x 576 pixel resolution. Files
above this specification are not supported. The following message will be shown in
this event: "Video format not recognized".
Note 4: Even though files may have be downloaded with the correct supporting file extension
(container) ie. AVI, DIVX , the file code (codec) still may not be with a supported
format. In this case the following message will be shown again: "Video format not
recognized")
Movie setup
During movie playback press the menu button. The options following are: browse file,
aspect ratio and 3D effect.
Note: While in setup screens, use the menu button to return back to the previous main
screen
1. Browse file: Return back to file browser
2. Aspect ratio: Choose between auto, full screen and pan screen views
3. 3D effect: Select ON or OFF.
9
Page 10
DVBT-7TOUCH USER MANUAL
MUSIC PLAYBACK
Select the music icon from the main menu screen. Select a folder location and then a file for
playback. Select OK to confirm your choice and to start playback.
Music setup
During music playback press the menu button. The options following are: browse file,
equalizer, play mode and 3D effect.
1. Browse file: Return back to file browser
2. Equalizer: Select between classic, club, live, rock, and pop or to turn the equalizer off
3. Play mode: Select between repeat all, repeat one or shuffle.
4. 3D effect: Select between ON or OFF.
PHOTO PLAYBACK
Select the photo icon from the main menu screen. Select a folder location and then a file for
playback. Use the OK button to confirm your choice and to start playback.
Photo setup
During photo playback press the menu button. The options following are: browse file, play
interval and play effect
1. Browse file: Return back to file browser
2. Play interval: Choose between play back intervals of 4, 6, 8 and 10 seconds
3. Play effect: Choose between random, fade and scroll.
Note: Use the onscreen controls to rotate the image if required.
DEVICE SETTINGS
Select the settings icon from the main menu screen. Use the OK button to confirm your
choice. The options following are: display setting, region/language, time setting,
version/upgrade, and reset default.
1. Display setting: Select between:
1.1 Aspect ratio: Choose between auto, full screen and pan screen
1.2 Auto off: Choose between 15, 30 and 60 seconds (or turn this feature off)
1.3 Brightness: Use the bar graph and volume keys for adjustments
1.4 TV-out system: Choose between PAL and NTSC
1.5 Screen saver: Choose between clock or to turn this feature off.
2. Region/language:
2.1 Region: Choose your region (country)
10
Page 11
DVBT-7TOUCH USER MANUAL
2.2 Language: Choose your language
3. Time setting:
3.1 Time Zone: Select your time zone
3.2 Summer time: Adjust for day light savings time (ON or OFF)
4. Version/upgrade:
4.1 Version: Use this feature to view (only) your device model and software
version.
4.2 Upgrade: Once selected this feature will take you to a folder location to
locate the upgrade software. (Note: Only used when revised firmware
packages, on occasion, are available.)
5. Reset default: Once selected press the OK button to confirm your choice.
Note: All user data and settings will be permanently removed.
CONVERTING PLAYBACK FILES
There are many free versions of file converting software on the market today. We
recommend http://www.freemake.com/downloads/ Freemake is easy to use and the file
conversions have been tested to work with this device.. If you are unsure how to tackle file
conversation or you have never done it before, we recommend that you have a few trial
runs of the software so you can become familiar with the terminology and processes.
Following are some notes that may help you on your way:
1. Once you have installed “Freemake” and it is operating correctly, open the program
and select the file you wish to convert using the icons at the top of the screen.
2. Once selected, the confirmation screen will allow you to check that you have
selected the correct file.
3. Then select the AVI icon from the list at the bottom of the screen. Locate it by using
the left and right arrows if needed.
4. Select DVD quality in the preset field, the save-to location for the file, and then press
the convert button
5. After a short period (a progress bar will appear) a confirmation screen will appear to
advise if your conversation was successful. The file is now ready to use.
11
Page 12
DVBT-7TOUCH USER MANUAL
Problem
Possible Reason
Solution
The battery is totally
Connect the unit to an external power
The power cord is not
Check the power lead connection. When
The unit is not switched on.
Slide
the power switch
to
the
“ON” position.
The SD/MMC Card or USB
The number of available
Use the external antenna to increase the
Only
locally
broadcasted channels can be
Use the external antenna to increase the
Wrong antenna
setting
TROUBLE SHOOTING Q & A
Most of the troubleshooting issues can be easily solved. The most common cases and
solutions are listed below. If the problem persists, please contact the LASER support team
for further assistance.
No picture, no audio.
In DVB-T mode, the
number of DVB-T
channels is not as
much as we
expected.
discharged.
properly inserted into the
unit.
device is not properly
inserted.
channels is limited due to your
local reception. The available
channels can vary depending
on the area.
The signal quality of some TV
channels is too low.
source to charge the battery.
using the in-car power connector, check if
the power is available at the socket.
Check the SD/MMC Card or USB device to
ensure it is properly inserted into unit.
Perform an “Auto Search” to rescan all
channels when you are in a better reception
area. Otherwise connect the device to a wall
antenna socket via the MCX-IEC cable
reception sensitivity. For indoor use, place
the antenna close to a window and place it
clear of obstructions.
In DVB-T mode, all of
the channels show
“no signal or random
mosaic tiles appear
on the display.”
Some TV channels are not
available.
Some TV channel signals are
very weak.
viewed. They can differ depending on the
area you are in
reception sensitivity. For indoor use, place
the antenna close to a window and place it
clear of obstructions. Otherwise connect the
device to a wall antenna socket via the MCXIEC cable
For further product information and instruction please visit our product
web page at www.laserco.net or email support@laserco.com.au
Please note: As continual improvements are made to this product, slight operational
differences may occur. For the most up-to-date user manual, please visit our web site.
14
Page 15
DVBT-7TOUCH USER MANUAL
Warranty Against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in
materials and workmanship for 12 months, from the date of purchase, provided that the
product is used in accordance with accompanying recommendations or instructions where
provided. The benefit of this warranty is in addition to your rights under the Australian
Consumer Law and to other rights and remedies of the consumer under a law in relation to
the goods or services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a
refund, repair or exchange (where possible) for this product if it becomes defective within
the warranty period. This warranty will no longer apply where the defect is a result of
alteration, accident, misuse, abuse, normal wear and tear, neglect or improper storage.
Please retain your receipt as proof of purchase
How to make a product warranty claim:
Step 1: Find your receipt which proves the date of purchase. Where the date of purchase
cannot be verified, your place of purchase or Laser will make an assessment based on the
date of manufacture, the condition of the Laser Product and the type of defect.
Step 2a): Contact your place of purchase. They will assess the nature of the fault and
refund or replace the product as per their store refund or warranty policy.
Step 2b): If your place of purchase cannot be contacted, then you can contact Laser .
Customer Service with details of your defective Laser Product: Phone: (02) 9870 3355; or
Email: service@laserco.com.au or online www.laserco.net/support/warranty (click on
“Consumers (End Users)”). Our business address is at 1/6-8 Byfield Street, North Ryde, NSW
2113
Step 3: Laser . will issue you with a Return Authorisation (RA) number within 48 hours.
When requested, send us the defective Product and a copy of your receipt. Laser will cover
the cost of the return delivery.
Step 4: Wait for us to contact you. Once we have received your defective Laser Product for
inspection, we will inform you of our assessment of your claim within 7 days. When we
contact you, we will firstly let you know whether you have a valid claim under this Warranty,
and if so, we will inform you whether your defective Laser Product will be replaced or
repaired, together with the number of days you can expect to wait to receive your replaced
or repaired Laser Product.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
15
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.