Page 1
1. Top housing of body
2. Bottom housing of body
3. Propellers
4. Top housing of crankshaft
5. Bottom housing of “A”
crankshafts
6. Bottom housing of “B”
crankshafts
7. Battery housing cover
8. Electric propeller motors
9. Electric propeller motors
gears
10/11. Front lights
12. Camera lens
Drone x 1 Spare propellers x 4
Protective case x 1
User manual x 1
USB charger x 1
furniture and people
is best
Keep the drone away from power lines, trees and
people
storms and wind
A1 corresponds to propeller shape A
B1 corresponds to propeller shape B
When installing or dismantling
the propellers, please do so
carefully to avoid damage
LED lights will turn on while charging, and turn off when
complete. Charging time is approx. 2 hours.
C. Connect lithium battery and USB charger ready for
charging from any USB charging power source
Flying Precautions
Battery Safety Precautions
Battery Protection
Maintenance
Safety Precautions
● Please read through the manual’s before using.
● Please store small parts in a place well out of the reach of small
children.
● Never leave the DRONE unattended during battery charging.
● Never throw any batteries in a fire.
● Never fly the DRONE near other people.
● Keep all body parts away from the copter while the rotor blades are
spinning.
● Never try to repair circuitry, there are no serviceable electronic
inside the DRONE or transmitter.
Note:
Always dispose of old batteries responsibly
* Don’t use or leave the battery near a heat source such as fire or
heater.
* Don’t strike or throw the battery against any hard surface.
* Don’t immerse the battery in water, and keep the battery in a cool dry
place.
* When recharging, only use the battery charger intended for that
purpose.
* Don’t over-charge the battery.
* Don’t directly solder the battery or pierce it with a nail or other sharp
object.
* Don’t transport or store the battery together with metal objects.
* Never charge the battery for more than two hour
* Never leave charging battery unattended.
1.Keep small parts out of the reach of children, to avoid choking
hazard.
2.The DRONE is powerful, when taking off, move the throttle
forward gradually to avoid accelerating too quickly.
3. After flight, turn off the DRONE first, then turn off the controller.
4.Do not put the battery in high temperature or near heat source.
5.Note, to avoid injury or damage, the DRONE should not be flown
closer than 2 meters / 7 feet from people or other obstacles.
6.Children should fly the DRONE under adult supervision only.
Always keep the DRONE in clear sight while flying.
7.Always turn off the power of the controller and DRONE when not
in use.
1.The DRONE is equipped with low-voltage protection: When it’s
battery is low, the programmed control system will stop electrical
supply to DRONE ’s rotors. The battery then needs charging to allow
the DRONE to fly again.
2.The DRONE is equipped with over-current protection:When the
drone blades are jammed, to prevent damage, the control system will
stop power supply.
1. Clean the DRONE with clean, dry soft cloth only.
2. To avoid irreparable damage, keep the DRONE dry and away
from water. Do not fly in rainy conditions.
3. Check the DRONE and accessories for damage. If damage is
found, do not use the DRONE until it is repaired.
Turn on your drone and the Wi-Fi feature
on your portable device. Search and
connect to your drone as shown below
Navig[8]r SD - #####
Front
somersault
Backward
somersault
Flip to
left
Flip to
right
Click CONNECT from the App’s home page
Then click ON then the ALTITIUDE HOLD button.
Click ONE-KEY START (the up arrow key) to
pair and ready the motors for take-off.
When the drone has reached more than 3
meters in height, press the 360 button.
Then move the right joystick in the direction
you wish to flip and roll.
Press the 360 button again to turn this
feature off.
When you release the left joystick (throttle)
after an ascent or descent, the drone will
remain at that altitude
Right Rotation
Fine-tuning
Left Rotation
Fine-tuning
Forward
Fine-tuning
Backward
Fine-tuning
Left Side Fly
Fine-tuning
Right Side Fly
Fine-tuning
Rotate the drone to direct the camera and
press the camera button to take a picture.
Click the enter gravity sensor control,
roll and pitch your phone to fly the drone
backwards, forward and side to side.
To stop the drone drifting and to help it hover in once
place as best as possible, you may need to use the
fine tuning buttons.
For example if the drone is slightly drifting to the right
while in hover mode, repeatedly press the left button
to counteract the drift.
Use the rotate and forwards backwards fine tuning
buttons to counter drifts in those directions as well,
where needed.
Q: I have not used a Drone before. What are the first few things I
should be wary about?
A: The main thing to avoid is crashing your drone onto hard
surfaces. Use your drone out in an open field for the first time
and avoid hard surfaces or obstacles such as trees.
Q: What are the first few things I should master first with my
Drone?
A: First, gently raise your drone off the ground a few times, using
slow steady movements of the controller. Avoid the temptation
to fly as high as you can on the maiden voyage! Then get used
to just going backwards and forwards. Start with the simple
things first then move on to more advanced things later.
Q: I have crashed my drone and physically broken it. Is this
covered under warranty?
A: No. Physical damage is not covered by warranty. You can
request a quote for repair via our website at
www.laserco.com.au/repair-quote-form.
Q: How long do I need to charge the battery?
A: Charge the battery for up to 2 hours with the charger provided.
Q: What kind of battery life / fly time can I expect from the battery?
A: Up to 10 minutes of flight time depending on battery charge,
battery condition, take offs and landing and overall movement.
Q: Are there any laws or legal things I need to know before using
my Drone?
A: Yes. Please read the pamphlet at the end of the manual for
more information.
In extreme cases, to reset all fine tuning and
to reset the drones internal gyroscope cali-
bration, return the drone back to a level
surface and press the GYRO button.
The drone will reset and will then be ready to
fly again.
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in
materials and workmanship for 12 months, from the date of purchase, provided that the
product is used in accordance with accompanying recommendations or instructions
where provided. The benefit of this warranty is in addition to your rights under the
Australian Consumer Law and to other rights and remedies of the consumer under a law
in relation to the goods or services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a
repair, exchange (where possible) or refund (within Dead on Arrival period) for this
product if it becomes defective within the warranty period.
This warranty will no longer apply where the defect is a result of alteration, accident,
misuse, abuse, normal wear and tear, neglect or improper storage. Please retain your
receipt as proof of purchase.
How to make a product warranty claim:
Step 1: Find your receipt which proves the date of purchase. Where the date of
purchase cannot be verified, your place of purchase or Laser will make an assessment
based on the date of manufacture, the condition of the Laser Product and the type of
defect.
Step 2a): Contact your place of purchase. They will assess the nature of the fault and
repair, replace or fund the product as per their store refund or warranty policy.
Step 2b): If your place of purchase cannot be contacted, then you can contact Laser.
Customer Service with details of your defective Laser Product: Phone: (02) 9870 3388; or
Email: support@laserco.com.au or online at www.laserco.com.au/warranty(click on
“Consumers (End Users)”). Our business address is at 1/6-8 Byfield Street, North Ryde,
NSW 2113
Step 3: Laser will issue you with a Return Authorisation (RA) number within 48 hours.
When requested, send us the defective Product and a copy of your receipt. Laser will
cover the cost of the return delivery.
Step 4: Wait for us to contact you. Once we have received your defective Laser Product
for inspection, we will inform you of our assessment of your claim within 7 days. When we
contact you, we will firstly let you know whether you have a valid claim under this
Warranty, and if so, we will inform you whether your defective Laser Product will be
replaced or repaired, together with the number of days you can expect to wait to receive
your replaced or repaired Laser Product.
Step 5: For further details on warranty cover and returns, please check Terms and
Conditions for Warranty Returns section on http://www.laserco.com.au/warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replaceement or refund for a major failure and compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Warranty Against Defects
KNOW YOUR DRONE
4.Lithium Battery Charging
Navig[8]r SD
Use your phone to scan
the QR code matching your
device and download the
App, called NaVIG8R SD.
Alternatively, visit The App
Store for Apple IOS
devices, or Google Play for Android Devices
and search for the NaVIG8R SD App.
B. Carefully unplug the power connector to remove
the lithium battery.
Get to know
the rules.
IMPORTANT SAFETY
INFORMATION
Congratulations on your purchase. We hope you
have a lot of fun with it but there are just a few
things you need to remember for everyone’s safety.
You must only operate this aircraft in
your line-of-sight in daylight. Don’t let
it get too far away from you.
You must not fly
closer than 30 metres
to vehicles, boats,
buildings or people
You must not fly over any populous area,
such as beaches, other people’s backyards,
heavily populated parks, or sports ovals
where there is a game in progress
If you are in controlled airspace, which
covers most Australian cities, you must
not fly higher than 400 feet (120 metres)
You should not fly
within 5.5 km of
an airfield.
It’s illegal to fly for money or economic
reward unless you have an unmanned
operator’s certificate issued by the
Civil Aviation Safety Authority (CASA).
Safe and happy flying!
Further information
Model Aeronautical
Association of Australia
www.maaa.asn.au
CASA
» Model aircraft: casa.gov.au/sportaviation
» Remotely piloted aircraft: casa.gov.au/rpa
» Phone: 131 757
1309.1818
*Please read this manual carefully before operation
and kee it for future reference.
POCKET
SELFIE DRONE
Accessories PRE-FLIGHT PREPARATION
1. Select ight Environment
Indoor ying: choose an area away from pets,
Outdoor ying: Sunny day’s with little to no wind
2. Unfold Crankshafts
Unfolding Sequence:
①Unfold the rear crankshafts.
②Unfold the front crankshafts.(Near the camera)
Fold the crankshafts in reverse order.
CAMERA
3.Propellrs Installation
A1
A1B1
B1
FRONT
KNOW YOUR REMOTE CONTROL APP
1. Wi Connection
2.APP Interface Instruction
Return
Video
Speed Control:
30%/60%/100%
Gravity Sensor Control
More Settings
One- key Start
Camera Reverse
Headless Mode
Emergency Stop
Right Joystick(rudder)
Left/Right Side Fly
Fine-tuning
Left/Right Rotation
Fine-tuning
Forward/Backward
Fine-tuning
Photo
Document(Album/video)
Altitude Hold
Show/Hide Joystick controls
360° Flips&Rolls
One-key Landing
3D Display
One-key Reset
Left Joystick(throttle)
START YOUR FLIGHT
1.Remote Control Frequency Pairing
2.One-Key Start
3.Basic Flight
Use the left joystick to control the flight altitude
and turn left/right, and the right joystick to control
the forward, backward, left and right side flight
directions.
Left Joystick
Ascent
Descent
Turn Right
Turn Left
Forward
Backward
Right Joystick
Left Side
Flight
Right Side
Flight
Flips&Rolls
Hover
4.Take seles
5.Gravity Sensor Control
6.Fine-Tuning Function
7.One-Key Reset
FAQ
IOS
Android
Loading...