Page 1
DAB-DG200AM
QUICK START GUIDE
For further product information and instruction please visit
www.laserco.net
Page 2
DAB-DG200AM
1)
EVERYDAY FEATURES
TURNING THE UNIT ON
(1) Extend the antenna and press the ON/OFF
button. (2) The unit will then conduct a full autosearch scan and store all DAB/DAB+ Radio
stations. The auto search may take up to 1- 2
minutes to complete. (3) The unit is then ready to
use.
MANUAL STATION SCANNING
To manually change frequency, press or to
change in 0.05MHz steps.
press and hold the SCAN button.
To start auto-scanning,
QUICK START GUIDE
1)
2)
3)
1)
CHOOSING A STATION
When the auto searching is complete, you can
change stations by pressing or .
USING THE DISPLAY BUTTON
To view further station information, just press the
DISPLAY button each time to show 1) Radio
station name, 2) Frequency, 3) Signal transmission
rate and mode, 4) Signal strength, 5)Time, 6)
Scrolling station data, and 7) Radio Program Type
1)
Page 3
DAB-DG200AM
SWITCHING BETWEEN AM, FM AND DAB+
While enjoying a DAB/DAB+ program, you can
simply press DAB/FM/AM to change Modes
PRE-SETTING FAVOURITE CHANNES
This radio can store 10 DAB/DAB+, 10 FM station
and 10 AM station presets. To store the current
station (1) press and hold the PRESET button.
Then press or and SELECT your preferred
channel number. (2) A confirmation screen will then
be shown
SELECTING A PRESET STATION
To recall your list, press PRESET.
Press or to review and press SELECT to
confirm.
QUICK START GUIDE
1)
1)
2)
SETTING LANGUAGE/FACTORY RESET
Note: Changing language is also accompanied with
a factory reset, which means all personal settings
will be deleted.
(1) Press MENU repeatedly until “Language” is
shown. Press SELECT to confirm. Press or to
select from the list. (2) Press SELECT to confirm
your preference. The system will then reset and
restart.
1)
2)
Page 4
DAB-DG200AM
What’s in the box: 1 DAB+ Radio, 1 Power Adaptor, 1 Quick Start Guide
QUICK START GUIDE
*Please use 6 X “C” (R14/UM2) Size batteries (Not included). Type and quality of battery used in the product may affect the audio quality.
For further product information and instruction please visit our product web page
www.laserco.net
Loading...