Page 1
300k Pixel Digital Camera
User Manual
Page 2
AO-DIGICAM08
USER MANUAL
1
IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS
• Read instruction carefully before using this product
• Observe all warnings and cautions when using this product.
• Retain all manuals and documentation for future referral.
• Only use this product in a manner described in this manual.
• Do not use this device in extremely hot, cold, humid, dusty or sandy environments.
• Do not use this device in electrical storms or other conditions if the likely hood of
lightning is possible.
• Do not attempt to clean this product using liquid cleaners or aerosol cleaners. Use
only a damp soft cloth to clean the surface of this device.
• Extreme Care should be taken when using this product near any body of water such
swimming pools, kitchen sinks, baths and alike.
• This device is not waterproof. Do not use this device in the open if there is a high
level of moisture in the air.
• Only place the device on a stable surface and ensure that cables attached to the
device can not cause the device to fall.
• There are no serviceable parts in this device. Attempts to open this device by
unauthorised personnel may cause further dame and void the warranty.
• Image quality during web chat may vary depending in internet connection speeds at
both ends.
• Images of product and accessories are indicative only and may vary slightly from
actual product.
• We reserve the right to make changes to this document and the product without
notification.
• While this product can use rechargeable batteries. They cannot be charged in the
device.
• We recommend the use of quality alkaline batteries in this product.
Page 3
AO-DIGICAM08
USER MANUAL
2
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS ........................................................ 1
KNOWING YOUR DIGICAM ........................................................................................................ 3
WHAT’S IN THE BOX .................................................................................................................. 3
Getting Started .......................................................................................................................... 4
Taking Photos ............................................................................................................................ 4
Camera Functions ...................................................................................................................... 5
Power OFF ......................................................................................................................... 5
Auto Shoot Mode .............................................................................................................. 5
Continuous Shoot (AVI MODE) .......................................................................................... 5
3 Shot Continuous ............................................................................................................. 5
Delete All Photos ............................................................................................................... 6
Delete Last Photo Taken ................................................................................................... 6
Current Resolution ............................................................................................................ 6
Picture Compression Mode ............................................................................................... 6
Indoor Light Setting ........................................................................................................... 7
Connecting the Camera to a PC ................................................................................................ 7
Saving Your Pictures .................................................................................................................. 8
To save the images from the camera to you PC: .............................................................. 8
Webcam Function ..................................................................................................................... 9
To Use The Webcam Feature: ........................................................................................... 9
Trouble Shooting ..................................................................................................................... 10
Specifications........................................................................................................................... 10
For other accessories and products ........................................................................................ 12
Contact information ................................................................................................................ 12
Page 4
AO-DIGICAM08
USER MANUAL
3
KNOWING YOUR DIGICAM
Item
Description Item Description
1 Shutter Button 6 LCD Display
2 Lanyard Hole
(Lanyard not supplied)
7 Power Button
3 Battery Compartment
(batteries not supplied)
8 Not used
4 Lens 9 Function Button
5 View Finder
WHAT’S IN THE BOX
1) AO-DIGICAM08
2) Software CD
3) USB Cable
4) User Manual.
Page 5
AO-DIGICAM08
USER MANUAL
4
Getting Started
Prior to using the AO-DIGICAM08 you will need to fit 2 X AAA battery (Not supplied) in to
the compartment on the underside of the camera.
Please ensure that the compartment lid is secured correctly.
The AO-DIGICAM08 can be connected and be used by the PC with batteries being fitted.
Warning: The AO-DIGICAM08 memory is erased when not connected to a USB power or the batteries are
removed. Please download all picture or videos stored on the camera to the PC before opening the battery
compartment.
Tip: The Batteries can be changed by connecting the AO-DIGICAM08 to a powered USB port or USB charger
before opening the battery compartment. Leave the USB cable connected until new batteries are fitted and
the compartment is secured.
Taking Photos
1. Press the Power Button to start the camera.
2. Check the number of remaining shots and current
resolution on the main display (as per right)*.
*Please see further for more details
3. Change the capture mode if required.
4. Look through the viewfinder on the rear of the camera and place the subject in the
centre of the viewfinder.
5. Hold the camera steady and press the Shutter button. A beep will sound when the
picture has been taken.
6. The LCD will show 0 when no more pictures can be taken.
7. Press and Hold the Power Button until a beep is heard. Release the button and the
camera will turn off.
8. In Hi resolution it may take up to 2 seconds before the next shot can be taken.
Tip: for best results stand between the available light source and the subject where
possible. The quality of the light will affect the quality of the picture.
Page 6
AO-DIGICAM08
USER MANUAL
5
Camera Functions
Change the functions of the camera by press Function button and cycle through the
available options.
When the required option is displayed, press the shutter button to confirm or start.
Power OFF
1. Press the shutter button within 5 seconds to turn the camera off.
Auto Shoot Mode
1. Press the Function button until is displayed on the LCD.
2. Press the Shutter button with in 5 second to start the 10 second timer.
3. The camera will beep every second until the image is taken.
Continuous Shoot (AVI MODE)
1. Press the Function button until is displayed on the LCD.
2. Press and hold the shutter button within 5 seconds to activate the continuous
shooting feature.
3. The camera will beep for each photo taken until the shutter button is released or the
memory is full.
4. Photos are taken in QVGA mode
Warning: Continuous shooting may fail in poor lighting conditions
3 Shot Continuous
1. Press the Function button until is displayed on the LCD.
2. Press the Shutter Button within 5 seconds to take 3 continuous shots.
Page 7
AO-DIGICAM08
USER MANUAL
6
Delete All Photos
1. Press the Function button until is displayed on the LCD.
2. Press the Shutter Button and the Photo counter will flash.
3. Press the Shutter Button again within 5 seconds to delete all photos stores on the
camera.
Delete Last Photo Taken
1. Press the Function button until is displayed on the LCD.
2. Press the Shutter Button within 5 seconds to delete the last picture taken.
Warnings: Pictures deleted from the camera cannot be recovered. Please use extreme care when using the
Delete All or Delete Last functions.
Current Resolution
• Shown on the main display next to the
remaining picture count, this icon shows
whether the camera is in Low or Hi
resolution.
Mode Resolution (Pixels)
Hi VGA 640 X 480
Lo QVGA 320 X 240
Picture Compression Mode
This setting is for the compression setting used to process and store the image on the
camera.
• HD: High compression, smaller file size but lower picture quality.
• LD: Low compression, Lager file size but better picture quality.
Resolution Size Compression
Pictures*
Lo 320 X 240 Hd 274
Lo 320 X 240 Ld 100
Hi 640 X 480 Hd 76
Hi 640 X 480 Ld 25
*Note: The amount of images remaining is an estimate only and is recalculated after each shot. Amounts
may vary dependant on the amount of light and detail in each shot.
Page 8
AO-DIGICAM08
USER MANUAL
7
Indoor Light Setting
If the camera is using indoors the frequency of the camera should be set to match that of
power system used in your area.
1. Press the Function button until or is displayed on the LCD.
2. This is the current frequency setting of the camera.
3. To change the frequency, press the Shutter Button within 5 seconds.
Note: Generally Australia, New Zealand and Europe use 50Hz lighting while the US uses 60Hz lighting.
Connecting the Camera to a PC
Device drivers and the software must be installed before you can connect the AODIGICAM08 to your PC.
Please place the supplied CD in the optical drive on
your computer.
If the CD does not automatically start please locate
the drive in your computer window and launch the
Autrun.exe file found on the CD.
Click on the Install Drivers button and follow the
menus.
The computer will need to be restarted to complete the installation process.
Once restarted connect the Digicam to the Computer using the PC using the supplied USB
cable.
Click on the Install software button to install the included Photo and Video Software
• PhotoImpressions: picture editing software
• VideoImpressions: Video editing software.
Please refer to the software or the ArcSoft website for instruction of use.
Page 9
AO-DIGICAM08
USER MANUAL
8
Saving Your Pictures
Item
Description Item Description
1 Minimise the program 7 Select/Deselect All Pictures
2 Main Preview 8 Alter Picture attributes
3 Images Selected /Total Images 9 Pages current/Total
4 Update From camera 10 Close Program
5 Not Used 11 Display Camera Information
6 Save Pictures from camera 12 Previous/Next Page buttons
To save the images from the camera to you PC:
1. Open the MyDSC2 folder in the Start menu and launch the MyDSC2 program.
2. Click the Update Icon (4) to refresh the main Preview.
Page 10
AO-DIGICAM08
USER MANUAL
9
3. Click on the Save Pictures Icon (6) and select the option to save individual images or
all the images on the camera to a location on your hard drive.
4. Please wait until the status bar is finished before disconnecting the Camera.
Webcam Function
Item
Description Item Description
1 File Menu 5 Help
2 Device menu 6 Minimise/Maximise
3 Options menu 7 Close Window
4 Capture Menu 8 Active Webcam
To Use The Webcam Feature:
1. Open the MyDSC2 folder in the Start menu and launch the PCCam program.
Page 11
AO-DIGICAM08
USER MANUAL
10
2. If another webcam is connected to the PC please select the DualCamer listed in the
Devices menu (2)
3. Set the Device and capture options as required using the pull down menus.
4. 2
5. To use this product with VOIP software such as Skype and MSN Messenger please
refer to their instructions for connect webcams.
Trouble Shooting
Problem Solution
No Power Make sure that Batteries have power.
Make sure compartment lid is secured correctly.
Not Connecting Check USB cable is connected
Pictures lost when batteries
removed
Make sure that the battery cover remains closed until
photos have been copied to the PC
Specifications
Image sensor: 300K pixels CMOS sensor
Internal Memory: :4-16 Mb built-in SDRAM
Modes:-Digital - Video Recording(no sound)
- Still Photos
- PC Camera
Resolution: -640*480(VGA)
-320*240(QVGA)
File formats: 24-bit JPEG/AVI
Storage capacity: VGA 25 images, compressed 76 images
QVGA 100 images, compressed 274 images
Display: Three Digit “888ICON”Monochrome LCD
Display
Interface: USB 1.1
Shutter Speed: 1~1/10000 seconds
Video Frame Rate: 5~10 fps(VGA). 15~25(QVGA)
Lens: Fixed
Page 12
AO-DIGICAM08
USER MANUAL
11
Focus Range: 30cm~infinity(Normal)
Aperture: F2.8
Power control: Auto power off after 30 seconds without
operation.
Self timer: 10 seconds Delay
Power Source: AAA alkaline battery /USB power
Low voltage alarm: Auto
Viewfinder: Built-in
Page 13
AO-DIGICAM08
USER MANUAL
12
For other accessories and products
http://www.laserco.net
Contact information
For more information on this product and technical support please visit
HTTP://WWW.LASERCO.NET
Loading...