Page 1
Part No. 8297
ADAS Radar Angle Setting Tool
for Volvo
Instructions
www.lasertools.co.uk
Page 2
Introduction
This ADAS (Advanced Driver Assistance Systems) angle setting tool has been
designed to ensure the correct position of the front facing radar sensor on Volvo
XC60, S80, S60, V70, and V60 models as part of the calibration process.
• Equivalent to OEM 9997407.
• Applications include: S60/V60 (2010-2018), S80/V70 (2007-2016,)
XC60 (2008-2017).
Instructions
Refer to OEM instructions before carrying out
this procedure.
Precautions:
Instructions
Fig 1
Fig 2
Fig 3
• Refer to OEM instructions before carrying out this procedure.
• Observe standard workshop safety procedures.
• This product designed to be used correctly and with care for the purpose for
which it is intended. No liability is accepted by the Tool Connection for incorrect
use of this product, and the Tool Connection cannot be held responsible for any
damage to personnel, property or equipment when using the tool. Incorrect use
will also invalidate the warranty.
2
www.lasertools.co.uk
www.lasertools.co.uk
3
Page 3
Our products are designed to be used correctly and with care for the purpose
for which they are intended. No liability is accepted by the Tool Connection for
incorrect use of any of our products, and the Tool Connection cannot be held
responsible for any damage to personnel, property or equipment when using the
tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided
has been designed to offer general guidance for a particular tool’s use and while
all attention is given to the accuracy of the data no project should be attempted
without referring first to the manufacturer’s technical documentation (workshop or
instruction manual) or the use of a recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to
alter specifications and components without prior notice. It is the responsibility of
the user to ensure the suitability of the tools and information prior to their use.
www.lasertools.co.uk
8297_Instructions_V1
Loading...