Page 1
Swing Joint
Heavy Turf
&
Irrigation Products
Catalog
Current Pricing
17
Page 2
LASCO SWING JOINTS
First Digit
Step
Base Part Number
G
Step 1 - Specify a Body Diameter by Number
Second Digit Diameter Size
1 1"
2 1¼"
3 1½"
Step 2 -Specify an Inlet by Number
Third Digit Inlet Size
1 Socket
2 Spigot (Short)
3 Male Thread (MIPT)
4 Male ACME
5 Metric Spigot
6 Male BSPT
7 Long Spigot (4" Long)
8 Female BSPT
9 Reducing Female BSPT
H
M Main Line (Reduces from 1½" ACME to Swing Joint size)
P
1
Step
2
Spigot Saddle Connection (Increases from 1" Spigot to Swing Joint size)
Tap't™ Saddle Connection (Reduces from 1½" ACME to Swing Joint size)
Step
3
Step
-
4
Step
5
Step
5
Step 3 - Specify an Outlet by Number
Fourth Digit Outlet Style
1 Socket
2 MIPT (Available in 1", 1¼" and 1½" diameter)
3 Enlarging MIPT (Available in 1", 1¼" and 1½" diameter)
4 MIPT Special (Available in 1" and 1¼" diameter)
5 Thread BSPT (Available in 1", 1¼" and 1½" diameter)
6 Enlarging BSPT (Available in 1½" diameter)
7 Reducing MIPT (Available in 1" diameter)
8 Increasing ACME (Available in 1½" diameter)
9 Increasing BSPT (Available in 1¼" diameter)
0 ACME (Available in 1", 1¼" and ½" diameter)
A ACME Special (Available in 1¼" diameter)
C Reducing ACME (Available in 1" diameter)
D Reducing BSPT
S SnapLok (Available in 1" and 1½" diameter)
T Reducing SnapLok (Available in ¾" diameter)
U BSPT SnapLok (Available in 1" diameter)
Customer Service: 1-800-776-2756
2
Swing Joint & Heavy Turf Products Catalog
www.lasco ttings.com
Page 3
Step 4 - Swing Joint Style
Fifth Digit Swing Joint Style
1 Kits
2 Unitized Standard Sizes
3 Fabricated Length
4 Triple Top-Out
5 Fabricated Length with Triple Top-Out
Step 5 - Specify Lay Length
Style Last 2 Digits Lay Length
1_ _ or 4_ _ 00 ------
2_ _ 08 8"
12 12"
18 18"
3_ _ 10 10"
24 24"
30 30"
Please inquire about the availability of other lengths.
LASCO SWING JOINTS
Kits
Unitized Standard Sizes
Fabricated Sizes
4_ _ 08 8"
12 12"
Unitized Triple Top Sizes
18 18"
5_ _ 10 10"
24 24"
Fabricated Triple Top Sizes
30 30"
Please inquire about the availability of other lengths.
Swing Joint Carton Quantity
Part No. Lay Length (in) Ctn Qty
G_ _ _-_08 8" 15
G_ _ _-_12 12" 15
G_ _ _-_18 18" 10
Note: All 1" Diameter are packaged 15 to a carton. The G3_ _-412 are 10 per carton.
Build and price your own unit with our online Swivel Joint Confi gurator at
www.lascofi ttings.com
Swing Joint
Confi gurator
Customer Service: 1-800-776-2756
www.
lasco ttings.com
Swing Joint & Heavy Turf Products Catalog
3
3
Page 4
LASCO SWING JOINT INLETS
Inlets
ID # Inlet Description Inlet Size Swing Joint Size
1
2
3
4
5
6
Socket
Socket x ACME
Spigot - Short
Spigot x ACME
MIPT
MIPT x ACME
Male ACME
ACME x ACME
Metric Spigot
Spigot x ACME
Male BSPT
Male BSPT x ACME
1”
1¼”
1½”
1”
1¼”
1½”
1”
1¼”
1½”
1”
1¼”
1½”
1” (2,5cm)
1¼” (3,2 cm)
1½” (4,0 cm)
1” (2,5cm)
1¼” (3,2 cm)
1½” (4,0 cm)
1”
1¼”
1½”
1”
1¼”
1½”
1”
1¼”
1½”
1”
1¼”
1½” (same as M)
1”
1¼”
1½”
1”
1¼”
1½”
Replacement
Inlet Part No.
G110-000
G210-000
G310-000
G120-000
G220-000
G320-000
G130-000
G230-000
G330-000
G001-006
G001-005
G001-004
G150-000
G250-000
G350-000
G160-000
G260-000
G360-000
Carton
Qty
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Long Spigot
7
4” Long
Spigot x ACME
8
9
Female BSPT
Female BSPT x ACME
Reducing Female BSPT
Female BSPT x ACME
Spigot Saddle Connection
H
Increases from 361-211 Saddle
to Swing Joint Size
Main Line Connection
M
Reduces from 1½” ACME
Service Fitting to
Swing Joint Size
Tap't™ Saddle Connection
P
Reduces from 1½” ACME
Tap't™ Saddle
to Swing Joint Size
1”
1¼”
1½”
1” (2,5cm)
1½” (4,0 cm)
1½” (4,0 cm)
1½”
1”
1”
1”
1½”
1½”
1½”
1½”
1½”
1½”
1”
1¼”
1½”
1”
1½”
1”
1”
1”
1¼”
1½”
1”
1¼”
1½”
1”
1¼”
1½”
G170-000
G270-000
G370-000
G180-000
G380-000
G190-000 5
G120-017
G220-018
G320-019
G001-014
G001-016
G001-004
G001-017
G001-018
G001-019
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Customer Service: 1-800-776-2756
4
Swing Joint & Heavy Turf Products Catalog
www.lasco ttings.com
Page 5
Outlets
LASCO SWING JOINT OUTLETS
ID # Outlet Description Swing Joint Size Outlet Size
1
2
3
4
5
Socket
ACME x Socket
MIPT
ACME x MIPT
Enlarging MIPT
ACME x MIPT
MIPT Special
ACME x MIPT
Thread BSPT
ACME x BSPT
1”
1¼”
1½”
1”
1¼”
1½”
1”
1¼”
1”
1½”
1”
1¼”
1½”
1”
1¼”
1½”
1”
1¼”
1½”
1½”
1½”
1¼”
1¼”
1” (2,5cm)
1¼” (3,2 cm)
1½” (4,0 cm)
Replacement
Outlet Part No.
507-010
507-012
507-015
G102-000
G202-000
G302-000
G102-211
G202-212
G102-132
G302-169
G104-000
G204-000
G304-000
Carton
Qty
5
5
5
5
5
5
5
5
5
5
5
5
5
6
7
8
9
0
A
Enlarging BSPT
ACME x BSPT
Reducing MIPT
ACME x MIPT Special
Increasing ACME
ACME x ACME
Increasing BSPT
ACME x BSPT
ACME
ACME x ACME
ACME Special
ACME x ACME
1”
1¼”
1¼”
1½”
1”
1¼”
1½” (4,0 cm)
1½” (4,0 cm)
1”
1”
1½”
1½”
G106-211
G206-212
G202-168
G302-133
G108-211
G208-212
1” 1¼” (3,2 cm) G106-132 5
1”
1¼”
1½”
1”
1½”
1”
1¼”
1½”
1¼”
1¼”
G100-002
G200-002
G300-002
G108-132
G308-212
5
5
5
5
5
5
5
5
5
5
5
Customer Service: 1-800-776-2756
www.
lasco ttings.com
Outlets continued on next page.
Swing Joint & Heavy Turf Products Catalog
5
55
Page 6
LASCO SWING JOINT OUTLETS cont'd
Outlets
ID # Outlet Description Swing Joint Size Outlet Size
Reducing ACME
C
D
S
T
U
ACME x ACME
Reducing BSPT
1¼" ACME x 1" BSPT
Brass MIPT SnapLok™ 1”
Brass Reducing MIPT
SnapLok™
Brass BSPT SnapLok™
1¼”
1½”
1¼”
1½”
1½”
1" ¾"
1” 1”
1”
1"
1”
1"
1”
1½”
Replacement
Inlet Part No.
G208-168
G308-133
G208-168 + G104-000
G308-133 + G104-000
(Requires both fi ttings)
G001-011 (Elbow) +
G001-012 (SnapLok)
G001-022 (Elbow) +
G001-021 (SnapLok)
G001-013(Elbow) +
G001-012 (SnapLok)
G001-023(Elbow) +
G001-012 (SnapLok)
Carton
Qty
5
5
5
5
5
5
5
5
Swing Joint Replacement Parts
Swing Arm
Part No Nominal Size (in) Length
G100-208 1 8 5 11
G200-208 1¼ 8 5 11
G300-208 1½ 8 5 11
G100-212 1 12 5 11
G200-212 1¼ 12 5 11
G300-212 1½ 12 5 11
G100-218 1 18 5 11
G200-218 1¼ 18 5 11
G300-218 1½ 18 5 11
Street Elbow Assembly
Part No Nominal Size (in)
G100-002 1 5 11
G200-002 1¼ 5 11
G300-002 1½ 5 11
Carton
Carton
Qty
Qty
Code
Code
O-Rings
Part No Nominal Size (in)
53010 1 1 11
53012 1¼ 1 11
53015 1½ 1 11
53020 2 1 11
53030 3 1 11
Male Brass Stabilizer Elbow
Part No
G001-011 1 1 5 11
G001-013 1 ¾ 5 11
G001-022 1½ 1½ 5 11
G001-023 1 1 BSPT 511
Part No
G001-012 1 1 x ¾ 5 11
G001-021 1½ 1½ 5 11
Swing Joint
SnapLok™
Swing Joint
Outlet Size Carton Qty Code
Size
Outlet Size Carton Qty Code
Size
Carton
Qty
Code
Customer Service: 1-800-776-2756
6
Swing Joint & Heavy Turf Products Catalog
www.lasco ttings.com
Page 7
Swing Joint Kits
LASCO SWING JOINT KITS & ACCESSORIES
• For swing arms that can be made up in the fi eld to meet specifi c trench depths.
• Shipped as two assembled sections in a sealed bag.
• Installer has to cut and solvent weld pipe to desired length
• Follow approved procedures for solvent welding as per ASTM D2855-90
Swing Joint Kits: Model 100
Part No Nominal Size (in)
G1_ _-100 1 5 11
G2_ _-100 1¼ 5 11
G3_ _-100 1½ 5 11
Swing Joint Accessories
Swing Joint Wire Holders
Part No Nominal Size (in)
G004-010 1 60 11
G004-012 1¼ 60 11
G004-015 1½ 60 11
• Eliminates the need for electrical tape or wire ties.
• Suffi cient for four wires, either #12 or #14 single feeder
irrigation control cable.
• To keep in place, a small amount of PVC pipe cement
may be applied to one or both sides of the clip.
*LASCO "Wire holders" fi t LASCO Unitized Swing Joints only.
Carton
Qty
Carton
Qty
Code
Code
Triple Top-Out Swing Joint Kits: Model 400
Part No Nominal Size (in)
G1_ _-400 1 50 11
G2_ _-400 1¼ 25 11
G3_ _-400 1½ 25 11
Carton
Qty
Code
ACME Test Caps
Part No Nominal Size (in)
G548-010 1 50 11
G548-012 1¼ 25 11
G548-015 1½ 25 11
• The ACME Test cap can be used to pressure test systems
that utilize swing joints with ACME threaded outlets
• This cap can also be used to keep the ring clean and the
line free from debris.
Carton
Qty
Code
Fitting Adapter - Spigot x FIPT
Part No Nominal Size (in)
478-010 1 25 11
478-012 1¼ 25 11
478-015 1½ 25 11
Carton
Qty
Code
Swing Joint Riser Kits
• Raise the height of ACME thread sprinkler heads without adjusting
the swing joint lay length.
• Choose between pre-assembled ACME risers and ACME riser kits.
• Rated at 315 psi tested at 788 psi for 1 hour per ASTM F1970.
Pre-Assembled ACME Riser
Part No Nominal Size (in)
G587-002 1 x 7
G587-003 1¼ x 7
G587-001 1½ x 7
Installation Notes: ACME O-ring sealed threads should be Finger
Tightened and "Backed Off" one full rotation to provide maximum
fl exibility. Do NOT use Pre-Assembled ACME Riser Kits in
conjunction with Sprinkler heads utilizing tapered pipe threads.
FOR USE ONLY WITH MALE ACME SWING JOINT OUTLETS.
Customer Service: 1-800-776-2756
www.
lasco ttings.com
Carton
Long 15 11
Long 15 11
Long 15 11
Qty
Swing Joint & Heavy Turf Products Catalog
Code
ACME Riser Kits
Part No Nominal Size (in)
G590-002 1 15 11
G590-003 1¼ 15 11
G590-001 1½ 15 11
Carton
Qty
Code
ACME Female Adapter
Part No Nominal Size (in)
G001-002 1 25 11
G001-003 1¼ 25 11
G001-001 1½ 25 11
Carton
Qty
Code
7
7
Page 8
LASCO SWING JOINT & HEAVY TURF
Swing Joint Outlet Adapters
Outlet Adapters - FIPT x ACME
Part No FIPT Male ACME Carton Qty Code
G102-010 1 1 50 11
G002-132 1 1¼ 25 11
G002-133 1 1½ 25 11
G202-012 1¼ 1¼ 25 11
G002-169 1¼ 1½ 25 11
G002-212 1½ 1¼ 25 11
G302-015 1½ 1½ 25 11
• Convert swing joints with MIPT to ACME heads.
• Reduce Inventory - adapt MIPT swing joints to ACME heads.
• No wrench, thread sealant or Tefl on needed.
• Both connections are O-ring sealed for leak-free operation
• Works with all MIPT swing joints.
Heavy Turf Adapters
• Change the ACME outlet diameter without digging up the
Swing Joint
• Reduce the sprinkler conversion costs.
• Adapt other brands of Swing Joints to LASCO
More Info
Service Fittings.
• Reduce LASCO Heavy Turf Mainline fi ttings from 1½ ACME
to 1" and 1½ Female ACME thread.
More Info
Outlet Adapters - BSPT x ACME
Female BSPT
Part No
G108-010 1 1 50 11
G008-132 1 1¼ 25 11
G008-133 1 1½ 25 11
G208-012 1¼ 1¼ 25 11
G008-169 1¼ 1½ 25 11
G008-212 1½ 1¼ 25 11
G308-015 1½ 1½ 25 11
• Convert swing joints with BSPT to ACME heads
• Reduce Inventory - adapt BSP outlet swing joints to ACME heads.
• No wrench, thread sealant or Tefl on needed.
• Both connections are O-ring sealed for leak-free operation
• Works with all BSP outlet swing joints.
Male ACME Carton Qty Code
Swing Joint Adapters ACME x ACME
Part No
539-132 1 1¼ 25 11
539-133 1 1½ 25 11
539-168 1¼ 1 25 11
539-169 1¼ 1½ 25 11
539-211 1½ 1 25 11
539-212 1½ 1¼ 25 11
Male
ACME
Female
ACME
Carton Qty Code
ACME Service Fittings
• The ACME Service Seal fi ttings do not require Tefl on® or thread sealant. • ACME Service Seal fi ttings improve installation and lower maintenance costs.
Service Tee
Part No Nominal Size (in)
302-251 2 x 1½ 10 08
302-291 2½ x 1½ 5 08
302-337 3 x 1½ 5 08
Soc x Soc
x ACME
Double Swing Tee
Part No Nominal Size (in)
305-015 1½ x 1½ 10 08
ACME x ACME
x ACME
• Use the proven ACME O-ring Service Seal fi ttings to provide leak-free connection to the LASCO Swing Joint.
• Designed expressly for LASCO Swing Joints with either the “M” or “P” inlet connection.
Service Elbow
Carton
Qty
• Service Tee and Service Elbow for mainline & end-of-line connections. • Solvent cement for welded joint line connections.
• 1 1/2” Female ACME threads on the swing joint port to eliminate splitting & cracking. • Rated at 315 p.s.i. per ASTM F1970.
Code
Part No Nominal Size (in)
307-251 2 x 1½ 10 08
307-291 2½ x 1½ 5 08
307-337 3 x 1½ 5 08
Soc x ACME
Carton
Qty
Reducing Bushing
Carton
Qty
• 1 1/2 ACME thread on all connections.
• 315 PSI Rated by ASTM F-1970.
• Use two Swing Joints from one mainline
connection.
• Requested by Designers and Contractors.
• Use “M” Inlet to connect to 1”,1 1/4”, or
1 1/2” Swing Joints.
Code
Part No Nominal Size (in)
338-337 3 x 1½ 5 08
Spigot x ACME
• 1 1/2” ACME O-ring female threads.
• Used to adapt solvent mainline fi ttings for use as
1 1/2 ACME O-ring mainline fi ttings.
• Thread sealant or Tefl on Tape is not required.
Carton
Qty
Code
Code
Customer Service: 1-800-776-2756
8
8
Swing Joint & Heavy Turf Products Catalog
www.lasco ttings.com
Page 9
Tap'ts ™ and Thrusts™
fo
LASCO SWING JOINT & HEAVY TURF
More Info
In
Saddle with Socket Top-Out
Part No Nominal Size (in)
361-211 1½ Saddle x 1 Socket 5 B8
Pressure rated at 235 p.s.i. per ASTM F1970
Carton
Qty
Tap't™ Saddles with FIPT Top-Out
Part No Nominal Size (in)
362-209 1½ Saddle x ½ FIPT 2 B8
362-210 1½ Saddle x ¾ FIPT 5 B8
362-211 1½ Saddle x 1 FIPT 5 B8
For use with Swivel Joints
Pressure rated at 235 p.s.i. per ASTM F1970
Carton
Qty
Tap't™ Saddles with ACME Top-Out
Part No Nominal Size (in)
364-251 2 Saddle x 1½ FACME 5 B8
364-337 3 Saddle x 1½ FACME 5 B8
364-419 4 Saddle x 1½ FACME 5 B8
Pressure rated at 235 p.s.i. per ASTM F1970
Carton
Qty
Tap't™ Co upli ngs
Part No Nominal Size (in)
344-251 2 x 2 x 1½ 15 08
344-291 2½ x 2½ x 1½ 15 08
344-337 3 x 3 x 1½ 10 08
344-419 4 x 4 x 1½ 5 08
Carton
Qty
Code
Code
Code
Code
HDPE x Female ACME
Tap't™ Hybrid Coupling (End of the Line Fitting)
Part No Nominal Size (in)
P330-251 2 x 1½ 10 08
• Designed for Butt Fusion, Socket Fusion or Electrofusion
• Designed for 2” HDPE Lateral line
• Eliminate debris entrapment
• Completely clean out the system
• Saves water by keeping rotor valves clean
• Eliminate the end cap at the end of the line
• Eliminate the last Tap’t Saddle
• Reduces installation time
• Metric size 63mm also available
• Use with P-Inlet Swing Joint
Carton
Qty
Code
More Info
Thrust Plugs
Part No Nominal Size (in)
349-020 2 15 B8
Carton
Qty
Code
ISO Valve Connectors
ISO Valve Connectors
Part No Nominal Size (in)
302-020 2 10 08
307-020
308-020
308-030
336-020
336-030
• For easy repair and replacement of 2” isolation valves.
• Same design as the ACME O-ring leak-free joint.
• Tefl on® or sealants are NOT required. • Rated at 315 p.s.i. per ASTM F1970.
302 Tee
Slip x Slip x ACME
22½° Elbows
22½° Elbows
Part No Nominal Size (in)
865-020 2 10 02
865-030
2
2
3
2
3
307 Elbow
Slip x ACME
3
Carton
Qty
10 08
10 08
10 08
10 08
ACME x ACME
Code
408
308 Elbow
Carton
Qty
Code
502
336 Male Adapter
ACME x Slip
Customer Service: 1-800-776-2756
9
www.
lasco ttings.com
Swing Joint & Heavy Turf Products Catalog
9
Page 10
LASCO METRIC ACCESSORIES
Metric ACME Service Fittings
Service Tee
Part No Nominal Size (in)
7302-JJ-015 63mm x 1½ 10 08
7302-KK-015
75mm x 1½ 10 08
Carton
Qty
Service Elbow
Part No Nominal Size (in)
7307-J-015 63mm x 1½ 10 08
7307-K-015 75mm x 1½ 10 08
Carton
Qty
Metric Tap't™ Fittings
Tap't™ Sa ddle s
Part No Nominal Size (in)
7364-J-015 63mm x 1½ 5 B8
7364-K-015 75mm x 1½ 5 B8
7364-L-015 90mm x 1½ 5 B8
Now you can install LASCO swing joints in an HDPE system and be confi dent
the connection is secure. Ideal for “plowed” systems or where “poly” pipe is
required.
• Pressure rated at 235 p.s.i. per ASTM F1970.
• 304 Stainless Steel hardware is captured or retained...no loose pieces to drop.
• All sizes have 1½ ACME thread outlet.
• No Tefl on® or thread sealant required.
• Molded seal...to compensate for burrs and misaligned holes.
• Use with the “P” inlet confi guration for vertical piping outlets.
• Use the “M” inlet swing joint for horizontal outlets.
Carton
Qty
Code
Code
Code
• Use the proven ACME O-ring Service Seal fi ttings to provide leak-free
connection to the LASCO Swing Joint.
• The ACME Service Seal fi ttings do not require Tefl on® or thread sealant.
• ACME Service Seal fi ttings improve installation and lower maintenance costs.
• Designed expressly for LASCO Swing Joints with either the “M” or “P”
inlet connection.
• Service Tee and Service Elbow for mainline & end-of-line connections.
• Solvent cement for welded joint line connections.
• 1 1/2” Female ACME threads on the swing joint port to eliminate splitting
& cracking.
• Rated at 315 p.s.i. per ASTM F1970.
Tap't™ Hybrid Coupling (End of the Line Fitting)
Carton
Qty
HDPE x Female ACME
More Metric Info
Part No Nominal Size (in)
P7330-J-015 63mm x 1½ 25 08
• Designed for Butt Fusion, Socket Fusion or Electrofusion
• Designed for 2” or 63mm HDPE Lateral line
• Eliminate debris entrapment
• Completely clean out the system
• Saves water by keeping rotor valves clean
• Eliminate the end cap at the end of the line
• Eliminate the last Tap’t Saddle
• Reduces installation time
• Use with P-Inlet Swing Joint
Code
Metric HDPE Transition Union
Metric Surge Guard™ Fittings
Surge Guard™ Tee
Part No Nominal Size (in)
7301-J 63mm 25 08
Surge Guard™ Elbow 90°
Part No Nominal Size (in)
7306-J 63mm 25 08
• Designed for butt fusion, socket fusion
or elctrofusion onto 2” or 63MM HDPE
lateral lines
• Made in USA
• Buna O-Ring
• 200 psi
• Union design for Easy Removal
of the valve assembly.
• Compatible with 1” - 2” Valves
Carton
Qty
Carton
Qty
Code
Code
Our Patented LASCO Surge Guard Fittings were designed to be the
strongest and most forgiving PVC Golf Course Fittings we have ever produced.
The LASCO Surge Guard Tees are 10X Stronger than Sch 80 Tees
The Center for Irrigation Technology (CIT) at Fresno State University.
HDPE Transition Union
Part No Nominal Size (in)
P7896-J-249 63MM HDPE x 1” MIPT 10 08
P7896-J-250 63MM HDPE x 1¼” MIPT 10 08
P7896-J-251 63MM HDPE x 1½” MIPT 10 08
P7896-J-020 63
MM HDPE x 2” MIPT 10 08
Carton
Qty
Code
Surge Guard™ Elbow 45°
Part No Nominal Size (in)
7317-J 63mm 25 08
We now have third party testing results to verify:
based on repeat high stress failure testing from:
Carton
Qty
Code
10
10
Swing Joint & Heavy Turf Products Catalog
Customer Service: 1-800-776-2756
www.lasco ttings.com
Page 11
HDPE Transition Union
Surge Guard™ Fittings
More Info
LASCO SURGE GUARD GOLF FITTINGS
HDPE Transition Union
• Designed for butt fusion, socket fusion
or elctrofusion onto 2” or 63
lateral lines
• Made in USA
• Buna O-Ring
• 200 psi
• Union design for easy removal
of the valve assembly.
• Compatible with 1” - 2” Valves
MM HDPE
Part No Nominal Size (in)
P896-249 2” HDPE x 1” MIPT 10 08
P896-250 2” HDPE x 1¼” MIPT 10 08
P896-251 2” HDPE x 1½” MIPT 10 08
P896-020 2” HDPE x 2” MIPT 10 08
P7896-J-249 63
P7896-J-250 63
P7896-J-251 63MM HDPE x 1½” MIPT 10 08
P7896-J-020 63MM HDPE x 2” MIPT 10 08
MM HDPE x 1” MIPT 10 08
MM HDPE x 1¼” MIPT 10 08
Carton
Qty
Code
Surge Guard™ Tees
Part No Nominal Size (in)
301-020 2 25 08
301-025 2½ 10 08
Carton
Qty
Code
Surge Guard™ Reducing Tees
Part No Nominal Size (in)
301-249 2 x 1 10 08
301-250 2 x 1¼ 10 08
301-251 2 x 1½ 10 08
301-289*
301-290*
301-291*
301-292*
* Indicates fabricated fi tting
2½ x 2½ x 1
2½ x 2½ x 1¼
2½ x 2½ x 1½
2 ½ x 2 ½ x 2
Carton
Qty
Code
508
508
508
508
Surge Guard™ Elbow 90°
Part No Nominal Size (in)
306-020 2 25 08
306-025 2½ 10 08
Carton
Qty
Code
Surge Guard™ Reducing Elbow 90°
Part No Nominal Size (in)
306-249 2 x 1 25 08
306-250 2 x 1¼ 25 08
306-251 2 x 1½ 25 08
306-289*
306-290*
306-291*
306-292*
* Indicates fabricated fi tting
2½ x 1
2½ x ¼
2½ x 1½
2 ½ x 2
Carton
Qty
Code
508
508
508
508
Surge Guard™ Elbow 45°
Part No Nominal Size (in)
317-020 2 25 08
317-025 2½ 10 08
Carton
Qty
Code
Surge Guard™ Elbow 22½°
Part No Nominal Size (in)
365-025 2½ 10 08
Our Patented LASCO Surge Guard Fittings were designed to be the strongest
and most forgiving PVC Golf Course Fittings we have ever produced.
We now have third party testing results to verify:
The LASCO Surge Guard Tees are 10X Stronger than Sch 80 Tees.
Based on repeat high stress failure testing from:
The Center for Irrigation Technology (CIT)
at Fresno State University.
Carton
Qty
Test Report
Code
Customer Service: 1-800-776-2756
www.
lasco ttings.com
Swing Joint & Heavy Turf Products Catalog
11
11
Page 12
LASCO SPORTS FIELD SWING JOINTS
2" & 3" Sports Field
Swing Joints
2” and 3” Swing Joints for Sports Field applications:
These large swing joints are designed for use with large
sprinklers for artifi cial and natural turf applications, such
as Horse Tracks, Polo, Soccer, and Football Fields.
These ACME Swing Joints have the same fl exibility as
the smaller LASCO Swing Joints, but have been designed
to handle the large volume of water used by large radius
sideline sprinklers.
• Available in various lengths and connections
• Schedule 80 pipe for extra strength
• BSPT Inlet and Outlet options
• Designed for use with either bottom inlet or side inlet sprinklers
• Proven ACME threads for durability and fl exibility
More Info
12
Swing Joint & Heavy Turf Products Catalog
Customer Service: 1-800-776-2756
www.lasco ttings.com
Page 13
First Digit
Base Part Number
Step 1 - Specify a Body Diameter by Number
Step 2 -Specify an Inlet by Number
LASCO SPORTS FIELD SWING JOINTS
Step
G
Second Digit Diameter Size
Third Digit Inlet Size
1
42"
53"
1 Socket
2 Spigot (Short)
3 Male Thread (MIPT)
4 Male ACME
6 Male BSPT
7 Long Spigot (4" Long)
Step
2
Step
3
Step
-
4
Step
5
Step
5
Step 3 - Specify an Outlet by Number
Fourth Digit Outlet Style
1 Socket
2 MIPT
5 Male BSPT
7 Reducing MIPT (2" Reduces to 1½")
D Reducing Male BSPT (2" Reduces to 1½" White Outlet)
E Special Reducing Male BSPT (3" Reduces to 2")
Step 4 - Specify Swing Joint Style
Fifth Digit Swing Joint Style
3 Standard Factory Fabricated
9 Special Factory Fabricated for Side Inlet Rotor
Step 5 - Specify Lay Length by Number
Last 2 Digits Lay Length
12 12"
18 18"
(3"Reduces to 2½")
(3" Reduces to 2½" )
Style 3
Style 9
Customer Service: 1-800-776-2756
www.
lasco ttings.com
Swing Joint & Heavy Turf Products Catalog
13
13
Page 14
LASCO IRRIGATION
More Great Products from LASCO
LASCO now offers a full line of EPC Wrot Copper
and TecTite™ fi ttings for all your irrigation needs. For
more information see your LASCO representative or
visit us online.
LASCO now offers Apollo Bronze Gate, Ball and
Check Valves, as well as, water pressure reducing
valves and Backfl ow Preventers. For more
information see your LASCO representative or visit
us online.
Check out our line of Colonial Thermoplastic valves.
For over 50 years, thermoplastic valves have been
growing in acceptance as an effective choice over
metal valves in many applications. The advantages
include being dielectric, so they do not support an
electric charge; immune to microbiological-infl u-
enced corrosion that leads to rust and lower thermal
conductivity than metal valves, minimizing heat loss
or gain. Please refer to LASCO's Colonial Valve
catalog for a variety of valves
14
Swing Joint & Heavy Turf Products Catalog
Customer Service: 1-800-776-2756
www.lasco ttings.com
Page 15
Notes
Customer Service: 1-800-776-2756
www.
lasco ttings.com
Swing Joint & Heavy Turf Products Catalog
15
15
Page 16
Headquarters
414 Morgan Street
P.O. Box 116
Brownsville, TN 38012
731-772-3180 or 800-776-2756
Fax: 731-772-0835
Email: customerservice@lascofi ttings.com
Service Centers
CALIFORNIA
14820 Carmenita Road, Unit B
Norwalk, CA 90650
714-690-9679 / 800-995-2726
Fax: 714-736-1780
Email: warehouse80@lascofi ttings.com
COLORADO
5700 East 39th Avenue
Denver, CO 80207
303-575-6701 / 800-824-3675
Fax: 303-575-6706
Email: warehouse88@lascofi ttings.com
FLORIDA
6800 Kingspointe Parkway, Suite 400
Orlando, FL 32819-8588
407-206-5705 / 800-437-3155
Fax: 407-515-6542
Email: warehouse84@lascofi ttings.com
ILLINOIS
10350 Beaudin Blvd, Suite 800
Woodridge, IL 60517
630-597-0150 / 888-995-7414
Fax: 630-597-0156
Email: warehouse87@lascofi ttings.com
PENNSYLVANIA
325 Lasley Avenue
Wilkes Barre, PA 18706-1424
570-301-1170 / 800-882-5462
Fax: 570-301-1176
Email: warehouse82@lascofi ttings.com
UTAH
1641 South 700 West
Salt Lake City, UT 84104
801-972-0659 / 800-833-3993
Fax: 801-972-0688
Email: warehouse89@lascofi ttings.com
Limited Warranty
LASCO Fittings, Inc. products are warranted to be free from manufacturing defects in
materials and workmanship. They are warranted against rot, rust, and electrolytic corrosion for a period of fi ve years from date of installation. If LASCO
products prove defective due to manufacturing defects in material or workmanship during that period, the manufacturer will provide new replacement
units of the same type and size. No remedy will be granted under this warranty if LASCO products are not used strictly in accordance with LASCO’s
directions with respect to use and storage or if the products have been modifi ed in
any way. THE MANUFACTURER’S LIABILITY UNDER EXPRESSED OR IMPLIED
WARRANTY OR FOR ANY REASON IS LIMITED TO FURNISHING REPLACEMENT
UNITS OR GRANTING A CREDIT FOR DEFECTIVE UNITS. NO LABOR EXPENSE OR
CONSEQUENTIAL DAMAGES WILL BE PAID BY LASCO. THIS WARRANTY IS IN LIEU
OF ALL OTHER GUARANTEES AND WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PURPOSE, EXCEPT FOR ANY WARRANTIES IMPLIED BY LAW FOR NON
COMMERCIAL CONSUMERS. ANY SUCH WARRANTIES ARE LIMITED TO THE
DURATION OF THIS WRITTEN WARRANTY.
DO NOT USE LASCO FITTINGS FOR COMPRESSED AIR OR GASES.
DO NOT TEST PVC PIPING SYSTEMS WITH COMPRESSED AIR OR GASES.
DO NOT USE FITTINGS WITH LIQUIDS NOT RECOMMENDED BY LASCO.
MODIFICATIONS OF FITTINGS VOIDS THE WARRANTY.
Standard Terms and Conditions of Sale
1. Terms: 2% 35 days, net 45 days.
2. Freight: FOB LASCO warehouses. Prepaid on orders for products only totaling $1500 net for one
shipment to single destination within the contiguous United States.
3. Minimum Order: $100 net. Smaller orders billed at this minimum charge.
4. Claims for shipping errors must be made within 15 days to LASCO. Claims for damage or shortages
should be directed promptly to the common carrier by the consignee.
5. Returns will be accepted only by prior authorization and if shipped freight prepaid.
Returned merchandise subject to a 25% handling/restocking charge.
6. Pricing is subject to change without prior notice. However, prior notifi cation will be given in the event
of price changes in the period between order placement and scheduled shipment.
7. Offer to sell is not implied by possession of this or other LASCO price lists.
WASHINGTON
212 Business Park, Bldg D-106
Kent, WA 98032
425-272-0990 / 888-285-2726
Fax: 425-272-0995
Email: warehouse85@lascofi ttings.com
SJHTB-09
1616
Please visit our website: www.lascofi ttings.com
Loading...