EasyLog
Quick Start Guide
EL-MOTE
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Welcome!
Let’s set up your EL-MOTE
Before you connect your EL-MOTE, you need to do a few things.
• You’ll need to set up an account on
www.easylogcloud.com so that you can
view your devices remotely.
• Download the EasyLog Cloud App
on your phone or tablet
• Have your WiFi network details to hand
Not an Apple or Android user? Visit the support section on
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Remove mounting
bracket
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Remove battery cover
(do not ret this until
set up is complete)
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Connect probe/s
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Install AA
batteries
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
In the EasyLog Cloud App,
go to the menu, select Set
up Device and follow the
on-screen instructions
Once EL-MOTE is connected to
your WiFi network replace the
battery cover and install EL-MOTE
in its place of application
& you’re
ready to go!
View and change device settings using the App or at
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Device Indication Overview
Quick Start Guide
State Front Button LED Sounder
Device
OK
Fault
Alarm
1 Flash / 5 Sec
1 Flash / 5 Sec
1 Flash / 5 Sec
No Sounder
Single tone ring every 30 minutes
Continuous two tone ring
visual / sound state indication guide.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Front Button / LED Indicator
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Reset Button
Setup Button
Probe 2
RESET
SETUP
Power Adapter
Probe 1
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Important Safety Information
WARNING: Failure to follow these safety instructions could result in re, electrical shock,
other injury or damage.
Repairing or modifying
Never attempt to repair or modify this product. Dismantling may cause damage that is not covered
under the warranty. Servicing should only be provided by an approved supplier. If the product has
been punctured or seriously damaged, do not use it and return it to an approved supplier.
Using connectors and ports
Never force a connector into a port. Check for obstruction in the port; make sure that the
connector matches the port and that you have positioned the connector correctly in relation to
the port. If the connector and port do not join with reasonable ease, they probably do not match
and should not be used.
Power supply
Only use 1.5V AA batteries or a genuine EL-MOTE power adapter to power your EL-MOTE data
logger.
Disposal and recycling
You must dispose of this product and batteries according to relevant laws and regulations. This
product contains electronic components and therefore must be disposed of separately from
household waste.
Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according
to the instructions.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Loading...