DOWNLOAD & INSTALL EasyLog 21CFR SOFTWAREFIRST TIME SETUP
Windows 7, 8 & 10 (32 & 64bit)
Visit www.easylog21cfr.com and click on the download link.
.
Double click on the EasyLog 21CFR icon on your desktop.
1 Administrator Setup
EasyLog 21CFR Windows Control Soware
EasyLog 21CFR is the soware plaorm for Lascar’s 21 CFR compliant
range of data loggers
Double click on the downloaded EasyLog 21CFR Installer.exe le, and
follow the on screen prompts.
.
To see how EasyLog 21CFR Software meets the regulations,
view the checklist at www.easylog21cfr.com
You will need to create an Administrator for the software by lling in the
required information in the setup wizard. Make sure you keep a note of
your login details!
2 Email Settings3 Software Settings
.
You may need to ask your IT support or email service provider for the
required details. More information can be found in the software’s helple.
If you aren’t sure of the details, you can skip this step and come back
to it later.
For a full product data sheet for your data logger, or for more information on the rest of the EasyLog range visit
www.lascarelectronics.com
.
These are global settings that apply to all users of the software, some of
which are required as part of the 21CFR standard.
4 Create Additional Users
REPLACING YOUR DATA LOGGER’S BATTERY
Your data logger is provided with a 3.6V 1/2AA battery already installed. You
can change the battery by following the instructions below.
Replacement batteries are available from www.lascarelectronics.com.
.
Additional users can then be set up from the Admin menu if required. New
users will be asked to create a password when they rst log in.
You are now ready to start data logging with EasyLog 21CFR
For more information on how to use EasyLog 21CFR, please see the help
le in the software. This can be found by clicking ‘Help’ > ‘Help Topics’.
12
34
STARTING YOUR DATA LOGGER
Click on the ‘Set up and start the
USB data logger’ button.
Set restrictions for stopping the
logging session.
Name your logger and select the
logging rate.
Select when you would like the
logging session to start.
Select how the LCD should function,
and what happens when your logger
is full.
Your logger is now ready for use.
Remove from the USB port.
Set high and low alarms if required.
If you would like advice on how
best to use the data logger for
a particular application, please
contact your nearest Lascar
representative.
IMPORTANT SAFETY INFORMATION
Issue 2_07--16
Repairing or Modifying
Never attempt to repair or modify Lascar products. Dismantling them, other than for the purpose of changing replaceable batteries,
may cause damage that is not covered under the warranty. Servicing should only be provided by an authorized supplier.
Disposal and Recycling Information
You must dispose of Lascar products in accordance with relevant laws and regulations. They contain electronic components and
lithium batteries and therefore must be disposed of separately from household waste.
NEED HELP WITH YOUR DATA LOGGER?
Contact your nearest Lascar Electronics ofce:
Module House
UK
Whiteparish, Salisbury,
Wiltshire SP5 2SJ
UNITED KINGDOM
T +44 (0) 1794 884567
E sales@lascar.co.uk
4258 West 12th Street
USA
Erie, PA 16505
UNITED STATES
T +1 (814) 835-0621
E us-sales@lascarelectronics.com
8th Floor, China Aerospace Centre
HK
143 Hoi Bun Road
Kwun Tong, Kowloon
HONG KONG
T +852 2389 6502
E sales@lascar.com.hk
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.