EasyLog CC-2
QUICK START GUIDE
Test Equipment Depot
99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
- 800.517.8
431
1. Your new logger comes ready to go.
Simply press and hold the
button until the green LED lights up to start logging.
Push to start
Preset high
and low alarm
levels
Sensor
Status LEDs
2. Now place your logger in the location you want to monitor.
Once logging, pressing the
button will light up an LED to give a quick indication of the
status. It will also add a marker to the data to show that you have checked it.
No alarms will be triggered in the rst 30 minutes to allow the logger to settle at the
monitored conditions.
Green single ash
The data logger is currently logging
No alarm has been triggered
Red single ash
The data logger is currently logging
An alarm has been triggered!
Green double ash
The data logger’s memory is full
No alarm was triggered
Red double ash
The data logger’s memory is full
An alarm was triggered!
No LEDs ash
The data logger is stopped or the battery is at
No action required
Check alarm condition in PC software
Plug your logger in to a PC and download
your readings
Plug your logger in to a PC, download your
readings and check alarm condition
Check the logger’s status using the PC software
3. When you are ready to vie
w the recorded data on your logger, download the EasyLog CC
software.
Double click on the downloaded EasyLog CC Installer.exe le, and follow the on screen
prompts.
4. To save your data, remove the logger from the plastic sleeve and connect it to a
USB port.
Open the EasyLog CC software and click on Save Data.
This will automatically open up your readings in the EasyLogGraph software, where
you can view your data or export it in various formats.
The EasyLog CC Range
ALARMS:
HIGH
8°C
LOW
2°C
CHILLED GOODS
STATUS:
EL-CC-1
Temperature
EL-CC-2
Temperature/Humidity
FOOD
Test Eq
uipment Depot - 800.517.8431
99 Washington Street, Melrose, MA 02176
TestEquipmentDepot.com
EL-CC-2
Temperature/Humidity
PHARMACEUTICAL
Issue 1_07-17
Loading...