Lascar EL-USB-RT Installation And Operation Manual

EL-USB-RT

INSTALLATION AND
OPERATION GUIDE

electronic

s

1. Insert the EL-USB-RT

Conguration Software CD
into the CD drive of your computer.
If the CD does not automatically
load, navigate to the CD and
double click “EL-USB-RT.exe”

2. Installing software requires
administrative privileges. Accept
the “User Account Control”
request, enter password if
necessary

3. Click “Next” 4. Read the “IMPORTANT
NOTICE”, select “I Agree”
and “Next”

5. To accept the default install
location, click “Next”

6. Click “Next” to start the
Installation

NOTE - A progress bar will be
displayed until the installation
is complete

7. EasyLog USB is being installed 8. Click “Close”. An icon will now
be placed on your desktop and
in the notication area of the
taskbar

SOFTWARE INSTALLATION

Windows ™ 2000/XP/Vista(32-bit)

USB DRIVER INSTALLATION

Windows ™ XP

1. Insert the USB data logger into a USB port on the computer. The following
screens should automatically appear as the EL-USB-RT uses a standard built
in Windows drivers

2. Installation is now complete

1. Insert the USB data logger into a USB port on the computer. The following
screens should automatically appear as the EL-USB-RT uses a standard built
in Windows drivers

2. Installation is now complete

Windows ™ Vista(32-bit)

NOTE - At various times Vista may
ask security questions; allow
access when prompted

You have successfully installed the necessary software and driver for your EL-USB-RT data logger.