Larson Electronics WAL-SL-10-PAR38-LED-1227 User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

250 Watt Temporary Construction String Light - 10 LED PAR 38 Work Lights - 120-277V

Part #: WAL-SL-10-PAR38-LED

The Larson Electronics WAL-SL-10-PAR38-LED Work Area String Light is designed for high output job site illumination. This unit
features ten 25 Watt LED lamps producing 25,000 lumens of illumination with a lifespan of 50,000 hours. This work light comes with
10' of 14/2 SJTW cable between each lamp, allowing for temporary work light illumination spanning over one-hundred feet. This light
fixture features a low amp draw and is wet area approved, making this string light applicable to a number of outdoor work conditions
requiring temporary high output illumination.

The WAL-SL-10-PAR38-LED work area string light consists of ten industrial grade 25 Watt LED lamps with ten foot of 14/2 SJTW cable
between each unit. This temporary LED string light is connected to power via an integrated 3' cable terminated with a weather proof cord cap.
Each lamp socket is equipped with a high output PAR 38 LED bulb which is a more energy efficient lamp than typical 150 Watt PAR38 lights.
This work string light features a hook eyelet, making it versatile for a number of industrial applications requiring reliable and bright illumination.
The WAL-SL-10-PAR38-LED work light fixture features ten 25 watt LED PAR38 lights, for 250 Watts total. This series of temporary work lights
serve as a direct replacement for 150 watt PAR38 and 300 watt incandescent temporary work lights while overpowering traditional stringers.
This temporary LED work light is a far more energy efficient bulb, and provides 25,000 lumens at 250 watts and an 80% lumen retention at
50,000 hours, compared to the 2,500 hour lamp life offered by standard 150 watt PAR38 halogen lamps. The LED PAR38 lamps have a lower
energy consumption, produce more light output, are more durable to abuse and harsh environments, which translates into less maintenance
required by operators and huge savings long term.
These LED work string light consist of 100' of 14/3 SJTW cable, with 10' between each lamp and terminated in 3' of whip on the front and back
ends for a total of 106' of durable, weather proof string lighting. Utilizing energy efficient LED lamps, operators are able to provide more light
coverage from the same amp draw, or lower the amp draw using the same amount LED lamps as halogen. Each LED trouble light has an
effective range that approximately covers a 15' to 20' radius with a 60° flood beam.

Stringer Energy Consumption Comparison

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Halogen PAR38 LED PAR38

Wattage (single lamp) 150 Watts 25 Watts
Wattage (single stringer) 1,500 Watts 250
Amp Draw @ 120V AC 12.5 2.08
Amp Draw @ 220V AC 6.82 1.14
Amp Draw @ 240V AC 6.25 1.04
Amp Draw @ 277V AC 5.42 0.91
Amp Draw @ 12V DC 125 20.84
Amp Draw @ 24V DC 62.5 10.42
Lamp Life Expectancy 2,500 Hours 50,000 Hours
Color Temperature 2950K 2700K, 4300K, or 6000K
Operational cost per year (8hrs/day @

11c/kWh)
Operational cost per year (8hrs/day @

11c/kWh)
Operational cost per year (8hrs/day @

11c/kWh)

$2.16 $0.36

$64.80 $10.80

$788.40 $131.40

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of
light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
Safety within the workplace is another benefit of LED work lights and temporary lighting. All light sources produce heat. With traditional work
lamps, such as incandescent and halogen light sources, the lamp reaches high surface temperatures. These surface temperatures introduce a
burn risk to anyone to anyone that allows prolonged skin contact with the light source, as well as a fire hazard if a flammable material is
accidentally set too close to the light source for an extended period of time. While LED fixtures do still produce heat, they are designed with heat
sinks to properly disperse the heat. Each LED bulb is engineered to disperse and expel this heat quickly and efficiently, keeping the lamp cooler
than traditional light sources. This LED work light operates at a lower surface temperature than a comparable model with traditional light source,
and thus does not present a significant burn risk if an operator or bystander accidentally brushed up against an exposed lamp, and reduce the
fire hazard should they fixture accidentally come in contact with a flammable material for a short period of time. This significantly increases the
safety within the work environment.
These lights are configured to operate with 120V-277VAC or 11-25V DC without any modifications. These LED string lights provide more and
better quality illumination than 150 watt halogen string lights without the high heat and fragile glass construction of traditional lamps. These LED
lamps are suitable for wet areas, extremely long lived, resistant to damage from impacts and vibrations, and consume far less energy than
standard lamps.

Lamp Features Superior LED Benefits

1. 25 Watt PAR38 LED Lamps

2. Outdoor Approved

3. No ballast, no flickering, instant on illumination

4. Yellow Cage Plastic Guards for added protection

5. 120-277V AC or 12-28V DC Operation

6. Durable solid state LED construction resists damage from impacts
and vibrations.

7. Hanging hook for hanging and hands free operation.

8. 10 feet of 14/2 SJTW cable between each light.

9. End to end operations allows connecting multiple stringers together
for maximum work site illumination.

10. Energy efficient alternative to incandescent and compact
fluorescent temporary string lights

1. 50,000 hour lifespan.

2. Can SAVE 50% or more on energy.

3. Qualifies retrofit projects for financial incentives, including utility
rebates, tax credits and energy loan programs.

4. Reduces energy use and prolongs life-spans of peripheral cooling
units (A/C, refrigeration)

5. 100% recyclable.

6. No toxins-lead, mercury.

7. No UV light, infrared radiation or CO2 emissions.

8. Qualifies buildings for LEED and other sustainable business
certifications.

9. Bright, even light maintains consistent color over time.

10. Instant on/off – No flickering, delays or buzzing.

11. Very good color rendering.

12. Vibration/impact resistant.

13. Significantly cooler operation.

14. Less frequent outages, higher output improves workplace safety.

Page: 3