Larson Electronics WAL-SL-10-LED-1227 User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

100ft Temporary Construction String Light - Ten LED Work Lamps - 100 Watt LED Stringer

Part #: WAL-SL-10-LED

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Made in the USA

The Larson Electronics WAL-SL-10-LED Work Area Lighting LED String Light is designed for high output job site illumination. The 10
watt LED lamps on this this work site light set provide more and higher quality light than 100 wattage incandescent lights while
creating less heat and using less power. The high output LED lamps provide greater durability and extended lamp life compared to
traditional lamps, reducing maintenance and repairs while increasing overall illumination reliability on the job site.

This work area string light consists of ten industrial grade LED lamps with 10 feet of 14/2 SJTW cable between each unit. This temporary LED
string light is connected to power via an integrated 3 foot cable terminated with a standard 5-15 straight blade plug. Each globe light is equipped
with a high output LED bulb which delivers more light output than a 100 watt incandescent. The 10 watt LED bulb draws 10% the electrical
power of a standard 100 watt bulb, making it suitable for standard voltage and low voltage applications. Each LED light screws into a molded
E26 lamp socket and the bulb is enclosed in a bird cage style plastic guard.

Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge

100 Watt Incandescent Bulb 10 Watt LED Bulb

Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of
light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
Each light has a yellow plastic mesh guard enclosure that provides protection for the enclosed bulb and a hook eyelet that allows operators to
hang these tasks lights overhead. Multiple light stringers can be connected end to end to extend work area illumination. There are limits to how
many strings can be interconnected based on the overall amp draw, power source, etc. Utilizing energy efficient LED lamps, operators are able
to provide more light coverage from the same amp draw, or lower the amp draw using the same amount LED lamps as incandescent. Each LED
trouble light has an effective range that approximately covers a 5 to 8 foot radius with 10-15 foot candles of light.

Stringer Energy Consumption Comparison

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Incandescent CFL LED

Wattage 1000 watts 260 watts 100 watts
Amp Draw @ 120V AC 8.34 amps 2.17 amps 0.84 amps
Amp Draw @ 277V AC 3.61 amps 0.94 amps 0.36 amps
Amp Draw @ 12V DC 83.34 amps 21.67 amps 8.34 amps
Amp Draw @ 24V DC 41.67 amps 10.84 amps 4.17 amps
Lamp Life Expectancy 1,500 hours 8,000 hours 50,000 hours
Color Temperature 2800K 4300K 6000K
Operation cost per year

(8hs/day @ 11c/kWh)

These lights are configured to operate with 120V-277VAC current and are available in an optional 12-24V AC/DC configuration as well. These
LED string lights provide more and better quality illumination than 100 watt incandescent string lights without the high heat and fragile glass
construction of traditional lamps. These LED lamps are suitable for wet areas, extremely long lived, resistant to damage from impacts and
vibrations, and consume far less energy than standard lamps.

Lamp Features Superior LED Benefits

1. 10 Watt LED Lamps

2. Outdoor Approved

3. No ballast, no flickering, instant on illumination

4. Yellow Cage Plastic Guards for added protection

5. 120-277V AC or 12-28V DC Operation

6. Durable solid state LED construction resists damage from impacts
and vibrations.

7. Hook Eyelet for hanging and hands free operation.

8. 10 feet of 14/2 SJTW cable between each light.

9. End to end operations allows connecting multiple stringers together
for maximum work site illumination.

10. Energy efficient alternative to incandescent and compact
fluorescent temporary string lights.

$321.2 $83.52 $32.12

1. 50,000 hour lifespan.

2. Can SAVE 50% or more on energy.

3. Qualifies retrofit projects for financial incentives, including utility
rebates, tax credits and energy loan programs.

4. Reduces energy use and prolongs life-spans of peripheral cooling
units (A/C, refrigeration)

5. 100% recyclable.

6. No toxins-lead, mercury.

7. No UV light, infrared radiation or CO2 emissions.

8. Qualifies buildings for LEED and other sustainable business
certifications.

9. Bright, even light maintains consistent color over time.

10. Instant on/off – No flickering, delays or buzzing.

11. Very good color rendering.

12. Vibration/impact resistant.

13. Significantly cooler operation.

14. Less frequent outages, higher output improves workplace safety.

Page: 3