Larson Electronics MGS-30KVA-10X120-2X208-SSE User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Power Substation - 30 KVA - Converts 480V to 10 120V & 1 208Y AC GFCI Outlets - Stainless Enclosue

Part #: MGS-30KVA-10X120-2X208-SSE

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Made in the USA

The Larson Electronics MGS-30KVA-10X120-2X208 heavy duty power transformer substation converts 480 VAC three phase electrical
current to 120/208Y VAC. This unit provides operators the ability to safely tap into and distribute 480 Volt power from a variety of
sources including generators and direct grid power and power up to ten 120V tools (via L5-20R) and two 208Y devices (via L6-30). This
model is designed for use for both linear (motor) and non-linear loads (lighting, computers, etc.). For that reason, we deliver 120V and
208Y on the secondary and provide a neutral.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR
SUBSTATIONS*

The MGS-30KVA-10X120-2X208 power distribution system provides a safe and effective way for operators in industrial settings to tap into and
utilize power sources independently of the work area. This portable panel system is designed to receive 480V 3-hase power, which it then steps
down and makes available via ten GFCI protected 120 Volt 5-20R receptacles and 208Y VAC available via two protected L6-30 208Y outlets.

Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge

20 feet of #6 Type W cord connects line in power to a 60 amp disconnect switch fused at 50 amps, which controls current to the 30 KVA, 480
Volt 3 phase to 120/208Y transformer. The transformer is mounted to a 1/8” thick steel plate and the distribution assembly is mounted onto a
rugged 2-inch square carbon steel skid frame. The frame of this power distribution panel features 3X6X3/8 rectangular carbon steel forklift skid
pockets, a top located lifting eyelet, and four locking 8-inch wheels to allow easy transport.
The secondary 100-amp main breaker panel includes ten 20-amp, 120V and two 30-amp breakers and is enclosed in a NEMA 4X stainless steel
enclosure.
This unit is weatherproof and ideal for use in applications including but not limited to, plant maintenance, wet location operations, as a welding
station, shows and exhibits and marine applications. These units are popularly used in wet locations where external power sources are often
necessary and work well in combination with vapor proof lights.

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power
distribution systems, we can deliver custom ordered units almost as quickly as our prebuilt units If this model does not meet your needs, please
contact us at 1-800-369-6671 or [e-mail].

Specifications / Additional Information

MGS-30KVA-10X120-2X208 Power Transformer
Line-In: 20’ #6 Type W Cable w/ Blunt Cut End Max Primary OCP: 36 amps @ 480V

Primary Voltage: 480 VAC Three Phase Max Amps Input: 83 amps @ 208V
Transformer: 30KVA 480-120/208Y N3R
Secondary Voltage: 120/208Y VAC Single Phase UL 1640
Secondary Panel: 100A MB N4X SS Enclosure
Breakers: (10) 120V 20A GFCI & (2) 208Y 30A
120V Outlets: (10) 120V 20A w/ Covers
208Y Outlets: (2) 250V L6-30 Twist-Lock w/ Covers Special Orders- Requirements
Protection: GFCI Outlets, On-board Circuit Breakers Contact us for special requirements
Disconnect: 60A 3-Phase Disconnect, Fused at 50A Toll Free: 1-800-369-6671

Features

Mounting: Steel Skid Frame w/ Forklift pockets, pickeye Lifting Eyelet,

and locking casters
Dimensions: 34”-L X 44”-W X 58”-H E-mail: [e-mail]
*All grounding shall comply with state and local code and meet the

minimum requirements of the Nation Electrical Code (NEC Section

250)

Scroll Down to Purchase

Intl: 1-903-498-3363

Part #: MGS-30KVA-10X120-2X208-SSE (105235)

Page: 3