Larson Electronics LE-2206-LED Instruction Manual

Part # LE-2206-LED

Larson Electronics, LLC Phone: [phone] Fax: [phone] www.larsonelectronics.com

1 of 2

LE-2206-LED

Waterproof/Explosion Proof Light

Waterproof/Explosion Proof LED Light

Instruction Manual

Thank you for your purchase of the Waterpro of/Explosion Proof LED Flashlight, the following instructions are int ended for
this part number only.

Battery Replacement and Operation

• To place/replace your battery, begin by unscrewing the lens ring.

• Next pull out the bulb housing from the light body.

• You can now insert your battery and replace the bulb ho usi ng to

begin use.

• Press the switch located on the top of the handle to turn on/off the
light.

Part # LE-2206-LED

Larson Electronics, LLC Phone: [phone] Fax: [phone] www.larsonelectronics.com

2 of 2

Safety Warnings and Ratings.

For personal safety, always follow the safety instructions in this manual to ensure safe and long- term use. Failing
to do so can result in damage to the product or serious bodily injury

Warnings

To prevent serious damage to eyesight, never
look into spotlight when light is on. DO NOT
shine light into the face of someone else.

DO NOT touch lens of spotlight when light is on
or if it was recently on. The lens will be hot and
could cause serious burns.

DO NOT allow children to handle or operate
this light.

DO NOT use this product for other than its
intended use.

DO NOT operate in close proximity of
Combustible or flammable materials.

DO NOT attempt to operate this light if cord,
plug, battery, bulb or any part of the light is
damaged or corroded.

Safety Rating:

UL CUL: Class I, Division 1, Groups C & D
Class II, Division 1, Group G
Operating Temp T3B
CSA: Class I, Division 1, Groups C & D
Class II, Division 1, Group G
Operating Temp T3A
ASTM MSHA Approved

For info on warranty and returns please visit our website: www.Larsonelectronics.com