Larson Electronics HALS-48-2L-T8-SFC, HALS-48-2L-T8-PND User Manual

Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Hazardous Location Fluorescent Lighting - 4' 2 Lamp Fixture - T8 Bulb - Multi-voltage - C1D2 & C2D2
Part #: HALS-48-2L-T8
Made in the USA
The Larson Electronics HALS-48-2L-T8 Hazardous Area Fluorescent Light Fixture is U.S./Canada ETL listed Class 1 Division 2 Groups A, B, C and D - 1598 listed and ideal for use in industrial hazardous location lighting where wet conditions and chemical/petrochemical vapors may be encountered.
***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***
The HALS-48-2L-T8 fixture is a 4 foot long, 2 lamp, ETL listed Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent light and a good choice for use in industrial applications and wet areas. This fixture is T4A temperature rated and comes standard with two T-8 fluorescent lamps which produce a combined 5,900 lumens of light. The housing on this unit is constructed of powder coated 18 gauge steel for durability and contains a hinged reflector and ballast tray for easy and safe servicing. The lamps are held in place by spring loaded sockets and protected by a hinged glass door with a 3/16” tempered glass lens which is secured with four turn latches. This fixture is multi-voltage capable and can be operated with voltages of 120, 277, 347 & 480 VAC. This fixture is IP65 rated water and dustproof and carries US and Canada approvals for wet and marine locations. This fixture also features multiple 1/2" NPT wiring hubs with two located on top of the fixture and two more located at each end, allowing operators to through-wire multiple units in series or mount the unit with wire through conduit pendant mounts. The HALS-48-2L-T8 provides operators in hazardous locations with a very durable, reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present.
Page: 1
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Standard Surface Mount Brackets:Each surface mounting bracket is attached on each end of the light and allows the operator to adjust the
angle of the entire fixture. Pendant mounts are available for operators who wish to mount these fixtures away from the ceiling surface. Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality Lamp Options
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.
3. Fixture housing constructed of white powder coated 18 gauge steel.
4. Relamping done via 4 turn latches, which enable the operator to unlatch the hinged door and access the lamps.
5. Heavy gauge hinged reflector with high gloss reflective finish. Resists dents and corrosion.
6. Multiple 1/2 inch, threaded NPT access holes for through wiring.
7. Units can be wired end to end in series.
F32-T8/841 – 32 watt, 2950 lumens per bulb, 30,000 hours life, 4100 Kelvin color (Suffix –T8)
Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Specifications / Additional Information
HALS-48-2L-T8 Hazardous Location Lighting ETL Listed ETL Listing: United States - Canada Class 1 Division 2, Groups A, B, C, D Dimensions: W-12 3/16" L-51 1/2 " H-5 5/16 " Class 2 Division 2 Groups F,G Materials: Powder Coated 18 Gauge Steel Class III Total Watts: 64 watts IP65 Voltage: 120, 277, 347 & 480 Wet Area Suitable Total Lumens: 5,900 ETL 1598 listed U.S. and Canada Lamp Life Expectancy: 24,000 Hours ETL 844 listed U.S. and Canada Efficiency: 87.5 Lumens per Watt Operating Temp Range: T3C-T4A Rated Beam Angle: N/A Special Orders- Requirements Color Temp: 4100K- T8 Contact us for special requirements Mounting: Surface Bracket Standard - Pendant Optional Toll Free: 1-800-369-6671 Wiring Hub: 1/2inch threaded 2-On Top 2-On Ends Fax: 1-903-498-3364
E-mail: sales@larsonelectronics.com
*3 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Please click here to see our 3 Year Warranty pamphlet.
Scroll Down to Purchase- Please note: 2 day lead time on this light.
Part #: HALS-48-2L-T8 (48585)
Page: 3
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Page: 4
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- IES
Page: 5
Loading...