Larson Electronics HALS-48-2L-LED-SFC, HALS-48-2L-LED-PND User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Hazardous Location LED Lighting - 4' 2 Lamp Fixture - LED Bulb - Multi-voltage - C1D2 & C2D2

Part #: HALS-48-2L-LED

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Made in the USA

The Larson Electronics HALS-48-2L-LED Hazardous Area Fluorescent Light Fixture is U.S./Canada ETL listed Class 1 Division 2
Groups A, B, C and D - 1598 listed and ideal for use in industrial hazardous location lighting where wet conditions and
chemical/petrochemical vapors may be encountered.

***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***

The HALS-48-2L-LED fixture is a 4 foot long, 2 lamp, ETL listed Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent light and a
good choice for use in industrial applications and wet areas. This fixture is T4A temperature rated and comes standard with two T-8 fluorescent
style LED lamps which produce a combined 7,000 lumens of light. The housing on this unit is constructed of powder coated 16 gauge steel for
durability and contains a hinged reflector and ballast tray for easy and safe servicing. The lamps are held in place by spring loaded sockets and
protected by a hinged glass door with a 3/16” tempered glass lens which is secured with four turn latches.
This fixture is universal voltage and can be operated with voltages of 120-277V AC for high voltage models, or 11-25V AC/DC for low voltage
models. This fixture is IP65 rated water and dust-proof and carries US and Canada approvals for wet and marine locations. This fixture also
features multiple 1/2" NPT wiring hubs with two located on top of the fixture and two more located at each end, allowing operators to through-wire
multiple units in series or mount the unit with wire through conduit pendant mounts.
We have eliminated the ballast normally associated with explosion proof fluorescent fixtures which reduces overall weight and overall complexity
of installation. There is no ballast in this unit and the included LEDT8-28W-V1 LED lamps have a 50,000+ hour service life, both of which result in
extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power
components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and
a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural
white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified.
Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during
operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate
when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a
polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant
illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent
lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting
diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.
The 28 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each
lamp produces 3,500 lumens at 120 lumens per watt, for a combined 7,000 total lumen light output. An HALS-48-2L-T8 explosion proof
fluorescent light, with a combined total of 64 watts, draws 0.54 amps at 120 volts AC. This LED version of the same light, with a total of 56 watts,
draws only 0.47 amps at 120 volts AC. The HALS-48-2L-LED is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V
AC 50/60hz without any modifications. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power.

Energy Consumption Comparison

T5HO T8 LED

Wattage 108 watts 64 watts 56 watts
Amp Draw @ 120V AC 0.90 amps 0.54 amps 0.47 amps
Amp Draw @ 220V AC 0.49 amps 0.29 amps 0.25 amps
Amp Draw @ 240V AC 0.45 amps 0.27 amps 0.23 amps
Amp Draw @ 277V AC 0.39 amps 0.24 amps 0.20 amps
Amp Draw @ 12V DC 9 amps 5.34 amps 4.67 amps
Amp Draw @ 24V DC 4.5 amps 2.67 amps 2.34 amps
Lamp Life Expectancy 20,000 hours 24,000 hours 50,000 hours
Operation cost per year

(12hs/day @ 12c/kWh)

The HALS-48-2L-LED provides operators in hazardous locations with a very durable, reliable and affordable lighting solution for open areas

$56.77 $33.64 $29.43

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

where flammable chemicals and vapors may occasionally be present.
Adjustable Surface Mount Brackets: Two L-brackets enables it to be simply secured to any flat surface. Three through holes provide sufficient

mounting for any environment. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be repositioned by
removing the adjustment bolts, rotating the fixture, and re-inserting the adjustment bolts in pre-drilled holes.
Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture is equipped with two 3/4”
NPT hubs, one on each end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid
pipe to one of the NPT hubs and tied in to the fixture’s lead wires, completing the electrical connection. The remaining pendant hub provides
support for the opposite end of the fixture.
Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical
manufacturing, Waste treatment plants, Gas processing plants.

Made in USA Quality Superior LED Benefits

1. 50,000 hour lifespan.

2. Can SAVE 50% or more on energy.

1. Each unit dialectically tested.

2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.

3. Fixture housing constructed of white powder coated 16 gauge steel.

4. Relamping done via 4 turn latches, which enable the operator to
unlatch the hinged door and access the lamps.

5. Heavy gauge hinged reflector with high gloss reflective finish.
Resists dents and corrosion.

6. Multiple 1/2 inch, threaded NPT access holes for through wiring.

7. Units can be wired end to end in series.

3. Qualifies retrofit projects for financial incentives, including utility
rebates, tax credits and energy loan programs.

4. Reduces energy use and prolongs life-spans of peripheral cooling
units (A/C, refrigeration)

5. 100% recyclable.

6. No toxins-lead, mercury.

7. No UV light, infrared radiation or CO2 emissions.

8. Qualifies buildings for LEED and other sustainable business
certifications.

9. Bright, even light maintains consistent color over time.

10. Instant on/off – No flickering, delays or buzzing.

11. Very good color rendering.

12. Vibration/impact resistant.

13. Significantly cooler operation.

14. Less frequent outages, higher output improves workplace safety.

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

HALS-48-2L-LED Hazardous Location Lighting Ratings/Approvals
Listing: United States - Canada Listed for United States & Canada
Dimensions: W-12 3/16" L-51 1/2 " H-5 5/16 " Class I, Division 2, Groups A, B, C, D
Weight: 31.5 Lbs Class II, Division 2 Groups F,G
Voltage: Universal 120-277VAC 50/60 Hz or 11-25V AC/DC Class III
Total Watts: 56 watts UL 844
Total Lumens: 7,000 UL 1598
LED Lamp Life Expectancy: 50,000+ Hours IP65
Luminous Efficiency: 125 Lumens per Watt Wet Area Suitable
Color Temp: 5600K, 4500K, 3000K Quick Release Draw Latches & Hinged Lens
Color Rendering Index: >80 Ease-of-Access Front Access Serviceability
Beam Angle: 150° Adjustable Surface Mount Brackets
Power Efficiency: 90% Made in the USA
Power Factor: >0.95
Ambient Operating Temp Range:-30° C to +85°C
Operating Temp Range: T3C-T4A Rated
Housing Material: Powder Coated 16 Gauge Steel
Lens Material: Tempered Glass Lens Special Orders- Requirements
Mounting: Surface Bracket Standard - Pendant Optional Contact us for special requirements
Wiring Hub: 1/2" NPT - (2) On Top, (2) On Ends Toll Free: 1-800-369-6671
U.L Approval: U.S Certificate Canada Certificate Fax: [phone]
Warranty: 5 Years* E-mail: [e-mail]

*5 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement. Please click here to see our 5 Year Warranty pamphlet.

Scroll Down to Purchase-

Part #: HALS-48-2L-LED (70391)

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- Dimensional Drawing

- High Res Pic1

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 6