Larson Electronics HAL-PRM-300W-LED User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Hazardous Location Lighting - 300 Watts - 60 LEDS - Class 1, Division 2 - Trunnion Mount

Part #: HAL-PRM-300W-LED

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Made in the USA

The extremely durable Larson Electronics HAL-PRM-300W-LED LED hazardous area light produces exceptional illumination from a 300
watt LED lamp. Constructed of die cast aluminum and U.L. listed for wet areas, this LED fixture is a versatile and ideal hazardous area
lighting solution for areas where wet or damp environments may be encountered.

***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM***

The durable HAL-PRM-300W-LED LED light fixture is suitable for use in wet outdoor environments, making it an ideal lighting solution for
industrial applications, boat docks, building exteriors and outdoor work areas. The lamp housing is weather resistant and constructed of pressure
cast copper free aluminum with an architectural bronze Polyester finish. The lens door is pressure-cast copper-free aluminum, and secured with
1/4” diameter captive stainless steel slotted hex-head bolts.
This hazardous location light contains sixty CREE XLamp XPG® five watt LEDs producing 493 lumens each. These LEDs are arranged in rows
and paired with high purity optics to produce a 60 degree flood beam while only drawing 2.5 amps on 120V, making these units ideal for use as
highly efficient yet powerful work and area lights. These lights can also be ordered in a spot configuration for a tighter beam with longer reach
and intensity.The HAL-PRM-300W-LED hazardous location LED light is an ideal replacement for fragile and hot running 1000 watt metal halide
floodlights. They offer Pulse Width Modulation control, cooler operation, low power requirements, high durability and a versatile mounting system
that makes these LED floodlights superior lighting solution for industrial and commerical applications where power and reliability is critical.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which
use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and
can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle”
accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each
LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current
flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of
light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on
or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit prevent excessive heat buildup which reduces LED life and also provide
secondary benefits through the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of
input levels across a specific range.
Durability: As well as unparalleled heat control, the HAL-PRM-300W-LED series of LED floodlights from Larson Electronics also offer IP65
rated construction that is designed to withstand demanding environmental and operating conditions. These units can withstandtemperatures of ­40 degrees Celsius to 80 degrees Celsius, are IP65 rated waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from
cast aluminum and the lenses are tempered glass. All hardware on this unit is corrosion resistant and the die-cast aluminum exterior has an
electro-coat dark bronze paint finish. The CREE XLamp XPG® LEDs help these units achieve 15.6Grms rated resistance to vibrations and are
rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in applications where a lot of dust, dirt,
dampness and abusive working conditions are encountered.
Mounting choices:

(1) Yoke mount: zinc plated steel yoke with architectural bronze Polyester finish.
(2) Poletop mount: built-in slip-fitter for internal wiring. Adjustable laterally and vertically. Slip fits 2” or 2 1/2” pipe. Architectural bronze Polyester
finish.
This hazardous area light is rated U.L. standard 844 and 1598 compliant, approved Class 1 Division 2, Groups A,B,C,D, and functionable in an
environment of up to 180 degrees celcius.

Page: 2