Larson Electronics HALP-24-2L-T8-SFC, HALP-24-2L-T8-PND, HALP-24-2L-T5HO-SFC, HALP-24-2L-T5HO-PND User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Class 1 Division 2 Fluorescent Light -2 Foot - Corrosion Resistant Requirements (Saltwater)

Part #: HALP-24-2L

Made in the USA

The Larson Electronics HALP-24-2L Hazardous Area Fluorescent Light Fixture is U.S./ Canada U.L. approved Class 1 Division 2
Groups A, B, C and D - UL 1598A listed, has a T4A temperature rating and is specifically designed to handle the rigors of wet and
corrosive marine environments.

The HALP-24-2L hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion
resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials including a
polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant
plastic latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This
fixture is UL 844 rated and Class 1 Division II, Groups A, B, C, D approved.
The HALP-24-2L also carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications. This lamp ideal for hazardous areas
where corrosion resistance is mandatory and space limitations require a compact lighting solution.

Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

NOTE ON LAMPS:This fixture comes equipped with-T5/HO – 24 Watt lamps producing2,500 lumens per bulb, a 5000 Kelvin color and a 20,000

hour rated service life. We offer -T12/HO –2025 lumens per bulb, 12,000 hours life, 10100 Kelvin color and T8/ – 1500 lumens per bulb, 24,000
hours life, 10100 Kelvin color tubes as lamp options for this fixture. The HALP-24-2L has an electronic universal voltage ballast and works with
120-277 AC 50/60Hz for high voltage
Surface Mounting:Flange type aluminum mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts
provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each
side of the fixture. The mounting holes are 14.91" inches on center apart along the top of this hazardous location light. The mounting holes are

9.5" inches on center across the top of the light.
Pendant Mounting: This light fixture can hang from the ceiling suspected by rigid pipe. Each fixture is equipped with two 3/4" NPT hubs on
either side of the fixture. Operators will bring rigid pipe down to the threaded mounting ups. The wiring is fed down through the rigid pipe to one
of the NPT hubs and tied to the fixture's lead wires to complete the electrical connection. The remaining pendant hub provides support for the
opposite end of the fixture.
Suggested Applications: The HALP-24-2L is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are
required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas,
processing plants and marine loading docks.

Made in USA Quality Lamp Options

T5/HO – 2500 lumens per bulb, 20,000 hours life, 5000 Kelvin color

1. Each unit dialectically tested.

2. Fixture arrives assembled and lamped to reduce installation time and
cost. Flange type stainless steel mounts attached at each end of the
fixture enables it to be simply secured to any surface.

3. Fixture housing constructed of glass fiber reinforced polyester.

4. Relamping done via 6 stainless steel snap locking latches, which
enable the operator to remove the door and access the lamps.

5. Lamp cover-diffuser constructed of high impact acrylic for corrosion
resistance and lamp protection.

6. 3/4 inch, threaded access hole for wiring conduit.

T12/HO--2025 lumens per bulb, 12,000 hours life, 10100 Kelvin color
T8– 1500 lumens per bulb, 24,000 hours life, 10100 Kelvin color

Click here to see the LED version of this light

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

HALP-24-2L Hazardous Area U.L. Ratings
UL Listings: United States - Canada Class 1 Division 2, Groups A, B, C, D
Dimensions: L-25.88” x W-7.21” x H-5.43” UL 844

Weight: 10.8 Lbs

Total Watts: 48 watts* California Title 24 Compliant
Voltage: 120-277 AC 50/60 Hz cUL Listed for Canada
Total Lumens: T5-HO Bulbs 4,400 Meets USCG Specs
Lamp Life Expectancy: T5-HO Bulbs 20,000 Hours T4 Temperature Rating
Efficiency: STD-T5-HO Bulbs 92 Lumens per Watt
Operating Temp Range: T4A Rated -20 C to +70 C
Beam Angle: N/A Special Orders- Requirements
Color Temp: 5000K- T5-HO Bulbs Contact us for special requirements
Pendant Mounting: (2) 3/4" hubs on either side Toll Free: 1-800-369-6671

Intl: 1-903-498-3363 Wiring Hub: 3/4" inch threaded NPT hubs
E-mail: [e-mail] U.L Approval: U.S Certificate Canada Certificate

UL 1598A Marine Type (Salt water)
IP67 Rated

Surface Mounting:(2) aluminum flange brackets

Minimum Operating Temp: -20 C
Maximum Case Temp: 70 C

Scroll Down to Purchase-

Part #: HALP-24-2L (45351)

Meets US Coast Guard specifications.

*Wattage totals are lamps only and may vary with different lamps.

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- SpecSheet French

- SpecSheet Arabic

- Dimensional Drawing

- IES

- STEP

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

- EASM

-

- Hi Res Image of the HALP-24-2L

- Hi Res Image of the HAL-24-2L with Surface Mount Brackets

- Hi Res Image of the HAL-24-2L with Pendant Mount Option

- Hi Res Image of the HAL-24-2L with Pendant Mount Option

Page: 6