Larson Electronics HAL-EMG-48-2L-T8-PND, HAL-EMG-48-2L-T8-SFC User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [email protected]

HAL-EMG-48-2L-T8 Fluorescent Light w/ Emergency Backup Ballast - C1 D II - Hazardous Location Areas

Part #: HAL-EMG-48-2L-T8

Made in the USA

The Larson Electronics HAL-EMG-48-2L-T8 Hazardous Area Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 2
Groups A, B, C and D - UL 1598A listed, has a T4A temperature rating and ideal for open air hazardous locations where flammable
chemical/petrochemical vapors may be occasionally encountered.

The HAL-EMG-48-2L-T8 fixture is a 4 foot long, 2 lamp, UL listed Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent light and
a good choice for use in applications where space is at a premium. This fixture is T4A temperature rated, comes standard with F32 T8 bulbs. The
lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free
aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi

-voltage capable and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-EMG-48-2L-T8 provides
operators in hazardous locations with a compact, reliable and affordable lighting solution for open areas where flammable chemicals and vapors
may occasionally be present.

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [email protected]

Click Here to Enlarge Click Here to Enlarge Click Here to Enlarge

Click Here to Enlarge Click Here to Enlarge Click Here to Enlarge

This fluorescent light works, mounts and is wired like our EPL-48-2L explosion proof fluorescent light fixtures. The main difference is that we
attach an extra Bodine ballast box to the unit that adds emergency light functionality to the fixture. This explosion proof emergency light will run
the standard 90 minutes after power is lost. The light recharges the battery once electrical power is restored. Standard configuration includes a
single emergency ballast that will run a single lamp at 900 lumens for 90 minutes. For an additional charge, a second ballast can be added to run
a second lamp for 1800 total lumens output for 90 minutes. The battery backup unit includes a switched leg for turning the light fixture on/off
without kicking the unit into emergency mode.

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [email protected]

NOTE ON LAMPS: This unit comes equipped with an electronic ballast and F32-T8/841 bulbs which produce 2950 lumens per bulb and have a

rated lifespan of 24,000 hours.
Standard Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is
set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt
hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or
wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting
brackets are removable. A single through hole enables the operator to install the light to any surface. Pendant mounts are available for operators
who wish to mount these fixtures away from the ceiling surface.
Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical
manufacturing, Waste treatment plants, Gas processing plants.

Made in USA Quality Lamp Options

1. Each unit dialectically tested.

2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.

3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.

4. Relamping done via 4 turn latches, which enable the operator to
unlatch the hinged door and access the lamps.

5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.

6. 3/4 inch, threaded access hole for wiring conduit.

7. Units can be wired end to end in series.

F32-T8/841 – 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin
color

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [email protected]

Specifications / Additional Information

HAL-EMG-48-2L-T8 Hazardous Area U.L. Ratings
UL Listing: United States - Canada Class 1 Division 2, Groups A, B, C, D
Lamp Type: Fluorescent UL 595 Outdoor Marine Type (Saltwater)
Dimensions: W-7" L-49 3/4 " H-6 1/8 " UL 1598A Marine Type
Weight: 33 Lbs California Title 24 Compliant
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz Switch Leg for Powering Light On/Off
Total Watts: 64 watts*
Total Lumens: F32-T8/841 Bulbs 5900
Luminous Efficacy F32-T8/841 Bulbs: 92.18 Lm/W
Lamp Life Expectancy F32-T8/841 Bulbs: 130,000 Hours
Color Temp: 4100K
Beam Angle: N/A
Ambient Operating Temp Range:-30°C to +70°C
Operating Temp Range: T4A Rated
Mounting: Bracket Standard - Pendant Optional
Wiring Hub: 3/4 inch threaded Special Orders- Requirements
Warranty: YES-3 Years* Contact us for special requirements
U.L Approval: U.S Certificate Canada Certificate Toll Free: 1-800-369-6671

Hal-48-2L Dimensional Drawing Fax: [phone]
Wattage totals are lamps only and may vary with different lamps. E-mail: [email protected]

*3 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement. Please click here to see our 3 Year Warranty pamphlet.

Scroll Down to Purchase- Please Note: 2 day lead time on this light.

Part #: HAL-EMG-48-2L-T8 (49710)

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [email protected]

Links (Click on the below items to view):

- SpecSheet French

- SpecSheet Arabic

- Dimensional Drawing

- Manual

- STEP

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [email protected]

- EASM

- Image of the HAL-EMG-48-2L-T8 Fixture with Surface Mount Brackets

- Close up Image of the Surface Mount Brackets on the HAL-EMG-48-2L-T8

- Image of the HAL-EMG-48-2L-T8 for Pendant Mounting

- Top Image of HAL-EMG-48-2L-T8 for Pendant Mounting

- Close up Image of the HAL-EMG-48-2L-T8 Fixture for Pendant Mounting

Page: 6