Larson Electronics FTL-3-LED-ILC-25-515-1227 User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

LED Drop Light/Task Light with Hooks - 14 Watts - 25' Cord - 3' Tube - Daisy Chain Connections

Part #: FTL-3-LED-ILC-25

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Made in Texas

The Larson Electronics FTL-3-LED-ILC-25 14 watt LED Portable LED Task Lighting Systems are suitable for civilian and military
shelter units and is also ideal in practically any environment including general maintenance, construction, aircraft interior, emergency
shelter, long or narrow pathways and ship yards. This series of Portable Task Lighting System incorporates a 2’ LED lamp and a 2’
polycarbonate lens that helps achieve a much longer lamp life, cooler operation, higher durability, and exceptional light quality
compared to that of incandescent drop lights.

Constructed to be completely weather and impact resistant, this LED drop light sacrifices no light output or quality to obtain these features. The
Larson Electronics FTL-3-LED-ILC-25 is shock resistant, making it durable enough to withstand drops, falls, and rough handling. Equipped with a
2' LED T8 Lamp and a 2' polycarbonate lens, this LED drop light is designed to operate at cooler operating temperatures than conventional
incandescent and fluorescent lights to reduce the chance of fire and burns. The built-in reflector provides a wide, glare free, and shadow-less
light field of bright white light.
The FTL-3-LED-ILC-25 is equipped with an LEDT8-24-V1 14 watt T8 style LED bulb from Larson Electronics, which produces 1,750 lumens and
requires no ballast to operate. The lightly frosted lens diffuses the light and makes this bulb ideal for food safe environments as there is no glass.
The nylon housing provides rigidity and strength for this LED bulb. These universal voltage fluorescent style LED bulbs run on voltage ranging
from 120-277V AC and 11-25V AC/DC.
We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and overall complexity of the task
light. There is no ballast in this unit and the included LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and
greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state
design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over
twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white color temperature.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of
light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of
light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
Mounting: This drop light comes standard with a set of drop hooks to allow users to conveniently hang the unit overhead anywhere illumination
is needed. A machined handle at the base of the drop light allows the FTL-3-LED-ILC-25 to be used as a handheld light fixture for spot
illumination when needed. Each light is equipped with 25 feet of SOOW cable, making this drop light versatile and provides the operator with
plenty of length for moving the light around the workspace. Each light is equipped with a 5' whip terminated in a female connector to allow end to
end connections. These LED lights are ideal for temporary illumination where daisy chain setups are preferred.
Voltage: The internal driver in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage
levels regardless of input levels across a specific range. These Portable LED Task Lighting Systems can operate on current ranging from 100 to
277V AC for high voltage models or 11 to 25V AC/DC for low voltage models without any modifications necessary as a result. This ability to
sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would
otherwise result in burning up or premature LED failure without it.

Click Photos to Enlarge

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

5-15 Straight Blade Plug
15 Amp / 125V Rated

Wiring and Plug: This portable LED task lighting system is equipped with 25 foot of 16/3 chemical and abrasion resistant SOOW cord that is

fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade
plug for 110V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets and NEMA L6-15 15 amp twist lock plug
for 240V twist lock outlets. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in
user provided cord caps. Please choose pigtail option below for flying leads with no plug.

L5-15 Twist Lock Plug
15 Amp / 125V Rated

L6-15 Twist Lock Plug
15 Amp / 250V Rated

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

LED Lamp Benefits

1.50,000+ hour lifespan.

2. Can SAVE 25% or more on energy.

3. 100% recyclable.

4. No toxins-lead, mercury.

5. No UV light, infrared radiation or CO2 emissions.

6. Bright, even light maintains consistent color over time.

7. Instant on/off – No flickering, delays or buzzing.

8. Very good color rendering.

9. Vibration/impact resistant.

10. Significantly cooler operation.

11. Less frequent outages, higher output improves workplace safety.

Energy Consumption Comparison

Incandescent T8 LED

Wattage 100 watts 17 watts 14 watts
Amp Draw @ 120V AC 0.84 amps 0.15 amps 0.12 amps
Amp Draw @ 220V AC 0.46 amps 0.08 amps 0.06 amps
Amp Draw @ 240V AC 0.42 amps 0.07 amps 0.06 amps
Amp Draw @ 277V AC 0.37 amps 0.06 amps 0.05 amps
Amp Draw @ 12V DC 8.34 amps 1.42 amps 1.17 amps
Amp Draw @ 24V DC 4.17 amps 0.71 amps 0.58 amps
Lamp Life Expectancy 1,500 hours 9,000 hours 50,000+ hours
Operation cost per year

(12hs/day @ 12c/kWh)

$52.56 $8.94 $7.35

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

FTL-3-LED-ILC-25 LED Task Light w/25' Cord Ratings
Lamp Type: LED Wet Area Approved
Dimensions: 42"-L x 36"-Dia Food Safe
Weight: 5 lbs 50,000 Hour Lamp Life
Voltage: 120-277 Volts AC or 11-25 Volts AC/DC End-to-End Daisy Chain Capable
Total Watts:14W High Output LED Lamp
Total Lumens: 1,750 Internal LED Driver - No Ballasts
Luminous Efficacy: 125 Lm/W Fluorescent Style LED Tube
Lamp Life Expectancy: 50,000+ Hours 25' SOOW Cable w/ Industrial Plug
Lamp Life: 50,000+ Hours Ships w/ Hanging Hooks

Color Temp: 5600K
Color Rendering Index: >80
Beam Angle: 150°
Power Efficiency: 90%
Power Factor: >0.95

Ambient Temperature Rating: -20° C to 85° C
Lens: 2' Polycarbonate Lens Special Orders- Requirements
Mounting: C Hooks / Hand Held Contact us for special requirements
Wiring: 25' 16/3 SOOW w/ Cord Cap - 5' cord w/ Female Plug Toll Free: 1-800-369-6671
Cord Cap: 5-15, L5-15, L6-15 or Pigtail Intl: 1-903-498-3363
Warranty: Yes - 3 Years E-mail: [e-mail]

*3 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement. Please click here to see our 3 Year Warranty pamphlet.

Scroll Down to Purchase

Cord Cap Options
Made in the USA

Part #: FTL-3-LED-ILC-25 (73055)

Links (Click on the below items to view):

- Dimensional Drawing

- STEP

- Hi-Res Image 1

Page: 5