Larson Electronics EPL-SL-10-LED-E2E-120277 User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Explosion Proof LED String Lights - 10 lights - Daisy Chain End-2-End Connection - 100ft Stringer

Part #: EPL-SL-10-LED-E2E

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Made in the USA

The Larson Electronics EPL-SL-10-LED-E2E Explosion Proof String Light set is U.L. approved Class 1 Division 1 Groups C and D and
is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection.

Click here to see the Incandescent version of this light
This explosion proof string light set from Larson Electronics contains a total of ten 10 watt work lights equipped with aluminum hooks and
connected in series along 100 feet of 14/3 SOOW explosion proof cord. A molded T junction is mounted every ten feet, with 3 feet of 16/3 SOOW
cord connecting a single drop light to the backbone. The cord on this unit is terminated with a 20 amp 5-20 or 6-20 Class 1, Division 1 explosion
proof plug for complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. An 25 foot tail section of main
SOOW cord is included to allow ample length for connection to power sources. An explosion proof outlet at the end of the backbone provides the
ability to conenct multiple units end to end, allowing operators to daisy chain multiple stringers together along the jobsite.

100FT of 14/3 SOOW Explosion Proof Cord Click Photo's to Enlarge Explosion Proof Daisy Chain Outlet

100 Watt Incandescent Bulb Molded T Connector w/ Hook Ring With the EPL-SL-10-LED-E2E

Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light
emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
This unit incorporates ten explosion proof LED hand lamps connected in series and is suitable for use in areas where petrochemical vapors and
various dusts are present. The machined aluminum housings, cast aluminum guard, tempered glass lamp globe, and abrasion resistant cord
make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the
lighting you require in a flexible, easy to manage configuration. The hand lamps can be moved around and hooked to different points on your
scaffold. The lights, however must remain within 10 feet of one other. Each molded T section contains a hook eyelet, allowing operators to

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

suspend the entire backbone off the ground and out of the work space.
This explosion proof string light is equipped with an explosion proof outlet 5' from the last junction point, allowing operators to connect multiple
units together end to end. Operators can daisy chain up to 10 units end to end in 120 volt or 20 units in 240 volt configurations. Up to three units
in 24 volt AC/DC can be connected end to end.

Stringer Energy Consumption Comparison

Incandescent CFL LED

Wattage 1000 watts 260 watts 100 watts
Amp Draw @ 120V AC 8.34 amps 2.17 amps 0.84 amps
Amp Draw @ 277V AC 3.61 amps 0.94 amps 0.36 amps
Amp Draw @ 12V DC 83.34 amps 21.67 amps 8.34 amps
Amp Draw @ 24V DC 41.67 amps 10.84 amps 4.17 amps
Lamp Life Expectancy 1,500 hours 8,000 hours 50,000 hours
Color Temperature 2800K 4300K 6000K
Operation cost per year

(8hs/day @ 11c/kWh)

This stringer light set is Class 1, Division 1 rated for Groups C and D and Class II, Division 1 Groups F and G. This unit is multi-voltage and
configured to operate on 120-277V AC or 12-24V DC, please choose your configuration below.

Made in USA Quality Lamp Features

1. Federal Spec Cord.

2. Explosion Proof.

3. Total of (10) 10 watt LED Lamps.

4. Non-sparking aluminum construction.

5. UL Class 1 Div 1 Class 2 Div1

7. 120-277V AC or 12-24V DC Operation

8. SOOW cable.

9. Aluminum Hooks for Convenient Placement.

10. Daisy Chain Connections.

$321.2 $83.52 $32.12

100 watts of LED illumination
Non-sparking aluminum housings
Light weight mold T Juctions
Cast aluminum guard prevent lamp or globe damage
Temptered Soda-Lime Glass Lamp Globe
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
14/3 SOOW Abrasion Resistant Cable

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

EPL-SL-10-LED-E2E U.L. Ratings
UL Listing: United States Class 1, Divisions 1 & 2, Groups C, D
Dimensions- Each Lamp: L-16.5" Diam-5" Class 2, Divisions 1 & 2, Groups, F, G
Total Watts: 100 Class 1, Zone 1, Group IIB
Single Lamp Watt: 10 watts NEMA 4X
Voltage: 120-277V AC or 12-24V DC
Amps: 0.84 120V AC
Mounting: Handheld / Hanging via Aluminum Hooks Special Orders- Requirements
Wiring: 100' 14/3 SOOW Cable - 20A EXP Plug - EXP Outlet Contact us for special requirements
Total Length: 125' Toll Free: 1-800-369-6671
Single Lamp Weight: 6 lbs Intl: 1-903-498-3363
Total Weight: 70 lbs E-mail: [e-mail]

Scroll Down to Purchase- Same Day Shipping on This Light!

Part #: EPL-SL-10-LED-E2E (68845)

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- Hi-Res Image 1 - Explosion Proof LED String Lights

- Hi-Res Image 2 - Explosion Proof LED String Lights

- Hi-Res Image 3 - Explosion Proof LED String Lights

- Hi-Res Image 4 - Explosion Proof LED String Lights

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

- Hi-Res Image 5 - Explosion Proof LED String Lights

- Hi-Res Image 6 - Explosion Proof LED String Lights

- Hi-Res Image 7 - Explosion Proof LED String Lights

- Hi-Res Image 8 - Explosion Proof LED String Lights

- Hi-Res Image 9 - Explosion Proof LED String Lights

- Hi-Res Image 10 - Explosion Proof LED String Lights

Page: 6