Larson Electronics EPL-SL-10-LED-1227 User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Explosion Proof LED String Lights - 10 lights - Class 1 Division 1 and Class 2 Division 1

Part #: EPL-SL-10-LED

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Made in the USA

The Larson Electronics EPL-SL-10-LED Explosion Proof String Light set is U.L. approved Class 1 Division 1 Groups C and D - and is
ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection.

Click here to see the Incandescent version of this light
This explosion proof string light set from Larson Electronics contains a total of ten 10 watt work lights equipped with aluminum hooks and
connected in series along 90 feet of 14/3 SOOW explosion proof cord. A molded T junction is mounted every ten feet, with 3 feet of 16/3 SOOW
cord connecting a single drop light to the backbone. The cord on this unit is terminated in a Class 1, Division 1 explosion proof plug for
complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. An 25 foot tail section of main SOOW cord
is included to allow ample length for connection to power sources.

10 Watt LED Bulb

Molded T Connector w/ Hook Ring

Click Photos to Enlarge Click Photos to Enlarge Click Photos to Enlarge

100 Watt Incandescent Bulb With the EPL-SL-10-LED

25' whip w/ EXP Plug

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of
light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
This unit incorporates ten explosion proof LED hand lamps connected in series and is suitable for use in areas where petrochemical vapors and
various dusts are present. The machined aluminum housings, cast aluminum guard, tempered glass lamp globe, and abrasion resistant cord
make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide
the lighting you require in a flexible, easy to manage configuration. The hand lamps can be moved around and hooked to different points on
your scaffold. The lights, however must remain within 10 feet of one other. Each molded T section contains a hook eyelet, allowing operators to
suspend the entire backbone off the ground and out of the work space.

Click Photos to Enlarge

5-15 Straight Blade Plug

This stringer light set is Class 1, Division 1 rated for Groups C and D and Class II, Division 1 Groups F and G. This unit is multi-voltage and
configured to operate on 120-277V AC or 12-24V DC, please choose your configuration below. A 25' input whip terminated in an explosion
proof cord cap completes the explosion proof protection of this string light. Cord cap options include a 5-15 15 amp straight blade plug for use
with 120V explosion proof outlets or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets.

Stringer Energy Consumption Comparison

Incandescent CFL LED

Wattage 1000 watts 260 watts 100 watts
Amp Draw @ 120V AC 8.34 amps 2.17 amps 0.84 amps
Amp Draw @ 277V AC 3.61 amps 0.94 amps 0.36 amps
Amp Draw @ 12V DC 83.34 amps 21.67 amps 8.34 amps
Amp Draw @ 24V DC 41.67 amps 10.84 amps 4.17 amps
Lamp Life Expectancy 1,500 hours 8,000 hours 50,000 hours
Color Temperature 2800K 4300K 6000K
Operation cost per year

(8hs/day @ 11c/kWh)

Made in USA Quality Lamp Features

$321.2 $83.52 $32.12

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

1. Federal Spec Cord.

2. Explosion Proof.

3. Total of (10) 10 watt LED Lamps.

4. Non-sparking aluminum construction.

5. UL Class 1 Div 1 Class 2 Div1

7. 120-277V AC or 11-25V AC/DC Operation

8. SOOW cable.

9. Aluminum Hooks for Convenient Placement.

Specifications / Additional Information

EPL-SL-10-LED Ratings
Listing: United States Class 1, Divisions 1 & 2, Groups C, D
Dimensions- Each Lamp: L-16.5" Diam-5" Class 2, Divisions 1 & 2, Groups, F, G
Total Watts: 100 Class 1, Zone 1, Group IIB
Single Lamp Watt: 10 watts NEMA 4X
Voltage: 120-277V AC or 11-25V AC/DC
Amps: 0.84 120V AC
Mounting: Handheld / Hanging via Aluminum Hooks
Wiring: 115' 14/3 SOOW Cable - 10' between lamps - 25' input whip Special Orders- Requirements

100 watts of LED illumination
Non-sparking aluminum housings
Light weight mold T Junctions
Cast aluminum guard prevent lamp or globe damage
Tempered Soda-Lime Glass Lamp Globe
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
14/3 SOOW Abrasion Resistant Cable

Cord Cap: 5-15 or 6-20 Explosion Proof Plug Contact us for special requirements
Total Length: 115' Toll Free: 1-800-369-6671
Single Lamp Weight: 6 lbs Intl: 1-903-498-3363
Total Weight: 65 lbs E-mail: [e-mail]

*3 year warranty replacement on this light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed light and/or LED bulb to Larson Electronics at their expense.
If the failure is a manufacturer defect, we will ship a new replacement
to the customer. If failure occurs within 30 days of receipt, Larson
Electronics will provide a return label via email to the customer. When
the failed light is returned, Larson Electronics will ship a new
replacement. Please click here to see our 3 Year Warranty pamphlet.

Scroll Down to Purchase- Same Day Shipping on This Light!

Part #: EPL-SL-10-LED (46699)

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- SpecSheet French

- SpecSheet Arabic

- Dimensional Drawing

- STEP

- Hi-Res Image 1

Page: 6

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

- Hi-Res Image 2

- Hi-Res Image 3

- Hi-Res Image 4

- Hi-Res Image 5

- Hi-Res Image 6

- Hi-Res Image 7

Page: 7