Larson Electronics EPL-MB-150LED-100-1523-60DB User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Explosion Proof LED Light - Magnetic Mount - Aluminum Base - C1D1 150 Watt LED Light

Part #: EPL-MB-150LED-100

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Made in the USA

The EPL-MB-150LED-100 Magnetic Mount Explosion Proof LED Light from Larson Electronics is rated Class 1 Division 1-2 Groups C &
D and Class 2 Division 1-2 and uses a low profile LED light head to produce 13,000 lumens of light while drawing only 150 watts.

The EPL-MB-150LED-100 magnetic mount explosion proof LED light provides 9,500 square feet of work area coverage with 13,000 lumens of
light output. This portable LED light is mounted to a portable aluminum frame base with legs and has a low profile LED light head measuring 16
inches by 14 inches. This unit includes a magnetic mounting attachment that allows mounting the fixture to metallic surfaces for added versatility
and easy setup. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and
hazardous locations where flammable vapors, gases and dusts may be present.

Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

This explosion proof LED light fixture is comprised of a 16x14 inch LED light head mounted atop a legged base stand fabricated from non
sparking aluminum, with a separate shelf type magnetic mounting bracket that allows mounting to ferrous metallic surfaces. The lamp can be
easily adjusted up or down 90 degrees and locked into position by simply loosening the two T-handle adjustment screws located on either side of
the light head and retightening them once the desired angle is found.
The magnetic mounting bracket for this unit includes six 200 lbs. grip magnetic bases which provide a total of 1,200 lbs. of grip and allows
operators to mount the unit to walls and flat metallic surfaces. Users simply attach the magnetic mounting bracket to the desired surface, then
hang the lamp assembly from the bracket. This bracket is constructed of non-sparking aluminum for light weight and durability, and the simple
hanging design allows operators to easily remove the lamp assembly to operate the unit as a pedestal lamp if desired.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light
emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
Safety within the workplace is another benefit of LED work lights and temporary lighting. All light sources produce heat. With traditional work
lamps, such as metal halide and high pressure sodium light sources, the lamp reaches high surface temperatures. These surface temperatures
introduce a burn risk to anyone to anyone that allows prolonged skin contact with the light source, as well as a fire hazard if a flammable material
is accidentally set too close to the light source for an extended period of time. While LED fixtures do still produce heat, they are designed with
heat sinks to properly disperse the heat. The LED light assembly is engineered to disperse and expel this heat quickly and efficiently, keeping the
lamp cooler than traditional light sources. This LED work light operates at a lower surface temperature than a comparable model with traditional
light source, and thus does not present a significant burn risk if an operator or bystander accidentally brushed up against an exposed lamp, and
reduce the fire hazard should they fixture accidentally come in contact with a flammable material for a short period of time. This significantly
increases the safety within the work environment.

Click Photos to Enlarge

5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug

Wiring and Plug: This portable explosion proof LED lighting system is equipped with 100 foot of 16/3 chemical and abrasion resistant SOOW

cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include C1D1 rated 5-15 15 amp
straight blade plug for 110-125V outlets with ground, C1D1 rated 5-20 20 amp straight blade plug for 110-125V outlets with ground, and C1D1
rated 6-20 20 amp straight blade plug for 220-250V outlets with ground. These explosion proof plugs must be mated with the appropriate
explosion proof outlet to retain the C1D1 rating. Please choose cord cap option below.
This light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of this LED fixture
that operates on AC/DC voltages from 11-25 Volts. The LED light assembly on this aluminum quadpod produces 13,000 lumens with a color
temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for
non-standard temperatures). This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and
temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The
housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. The light head can be
removed and used separately from the quadpod for added convenience.

Made in USA Quality Superior LED Benefits

1. Approved Class 1 Div1-2 Class2 Division I-2

2. Led lamp head requires no lamping.

3. Durable magnetic base mount constructed of copper free aluminum.

4. No ballast box. No ballast to replace.

5. Extreme long life LEDs reduce maintenance and replacement costs.

6. Adjustable LED light head.

7. 25 peel off mylar overspray lamp protectors ship with the unit.

8. 13,000 Lumens produced from only 150 watts.

9. Mercury free shock proof LED lamp light head.

1. 50,000+ hour lifespan.

2. Can SAVE 50% or more on energy.

3. 100% recyclable.

4. No toxins-lead, mercury.

5. No UV light, infrared radiation or CO2 emissions.

6. Bright, even light maintains consistent color over time.

7. Instant on/off – No flickering, delays or buzzing.

8. Very good color rendering.

9. Vibration/impact resistant.

10. Significantly cooler operation.

11. Less frequent outages, higher output improves workplace safety.

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

EPL-MB-150LED-100 Magnetic Mount Explosion Proof Light Quick Summary
Listing: United States & Canada Listed for United States and Canada
Lamp Type: LED Class I, Divisions 1 & 2, Groups C and D
Dimensions: 18"-W x 28.58"-H x 16.34"-D Class II, Divisions 1 & 2, Groups E,F,G
Weight: 45 Lbs Class III, Divisions 1 & 2
Voltage: 120-277V AC 50/60Hz Certified to UL 844 Ed. 13
Total Watts: 150 watts Certified to UL 1598
Total Lumens: 13,000 Certified to C22.2 No. 137 Rev 2009
Luminous Efficacy: 86.67 Lm/W Certified to C22.2 No. 250.0
Color Temp: 5000K, 4000K, 3000K T5 Temperature Rating
Color Rendering Index: >75 CRI IEC 60529 Tested
Beam Angle: 60° or 125° IP67 Rated Waterproof
Lighting Configuration: Flood Pattern LEL Approved
Power Efficiency: >95% Multiple Driver Banks
Power Factor: 0.992 80% Lumen Retention after 60,000 Hours
Ambient Operating Temp Range:-50° C to +65°C Factory Sealed Light Fixture
Operating Temp Rating: T5 Class 1 Div 1 Explosion Proof Plug
Lamp Housing Material: Copper Free Cast Aluminum 100 Foot Cord
Lamp Housing Finish: Epoxy Powder Coated - Grey Portable Aluminum Base Stand Mount
Lens Material: Hardened Borosilicate Glass Magnetic Mount Shelf for Base Stand
Gasket Material: Silicone Use as Portable or Magnetic Mount Light
Base Stand & Shelf Material: Non-Sparking Aluminum Direct Replacement for 400W MH Work Lights
Base Stand & Shelf Finish: Power Coated - Gloss Blue
Mounting: Aluminum Base Stand w/ Magnetic Mount Shelf
Magnetic Force: 1200lb Grip (200lb Gripping Force per Magnet)
Wiring: 100' 16/3 SOOW w/ C1D1 Cord Cap
Cord Caps: 15-Amp 5-15 (125V), 20-Amp 5-20 (125V), or 20-Amp 6-

20 (250V)

LED Driver Specs Special Orders- Requirements
Input Voltage: 100-277 Volts AC Contact us for special requirements
Input Current: 1.8A Max Toll Free: 1-800-369-6671
Output Voltage: 54V Max Intl: 1-903-498-3363
Output Current: 2.1A E-mail: [e-mail]
Warranty: Yes - 5 Years* - 10 Year / 100,000 Lumen Available**

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

*5 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement. Please click here to see our 5 Year Warranty pamphlet.
**10 year / 100,000 hour warranty available for this product. For more
information, please click here

Scroll Down to Purchase - Same Day Shipping Available

Part #: EPL-MB-150LED-100 (70926)

Page: 6

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 7

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- Dimensional Drawing

- Hi-Res Image 1 - Explosion Proof LED Light

- Hi-Res Image 2 - Explosion Proof LED Light

- Hi-Res Image 3 - Explosion Proof LED Light

- Hi-Res Image 4 - Explosion Proof LED Light

- Hi-Res Image 5 - Explosion Proof LED Light

- Hi-Res Image 6 - Explosion Proof LED Light

- Hi-Res Image 7 - Explosion Proof LED Light

- Hi-Res Image 8 - Explosion Proof LED Light

Page: 8

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 9