Larson Electronics EPL-LED-100W-RT-1227-125B-56K, EPL-LED-100W-RT-1227-60B-56K User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

100 Watt Explosion Proof LED Flood Light - Surface Mount - 8,667 Lumens - Class I Div 1

Part #: EPL-LED-100W-RT

The Larson Electronics EPL-LED-100W-RT Explosion Proof LED Flood Light fixture provides operators with a powerful and energy
efficient alternative to traditional hazardous location luminaries. LED technology and compact design makes this lamp an excellent
replacement upgrade option for bulky and high maintenance cost older fixtures.

This Class I Division 1 & 2, Class II Division 1 & 2 explosion proof LED flood light fixture provides 8,667 of high quality light while drawing only
100 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat
dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen
retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to
install.

Click Photo to Enlarge Click Photo to Enlarge

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

The explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED
lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains eight individual
LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only
one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue
to operate.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light
emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
This light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of this LED fixture
that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high
pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration
and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.

Energy Consumption Comparison

Metal Halide LED

Wattage 250 watts 100 watts
Amp Draw @ 120V AC 2.38 amps .83 amps
Amp Draw @ 220V AC 1.30 amps 0.45 amps
Amp Draw @ 240V AC 1.19 amps 0.42 amps
Amp Draw @ 277V AC 1.03 amps 0.36 amps
Amp Draw @ 12V DC 23.75 amps 8.3 amps
Amp Draw @ 24V DC 11.88 amps 4.17 amps
Lamp Life Expectancy 20,000 hours 50,000+ hours
Operation cost per year

(12hs/day @ 12c/kWh)

Each LED light fixture has the potential to save ~$100.00+ per year in electricty alone, not including maintainence costs, operational
downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the
return on investment of LED over metal halide becomes evident.

This LED light produces 8,667 lumens with a color temperature of 5600K and a color rendering index of 75 which produces colors and details
much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4500K natural white color
temperature options (longer lead times may apply for non-standard temperatures). The EPL-LED-100W-RT offers an adjustable mounting
system that this fixture to be mounted to any flat surface including walls and ceilings.

High Quality Features Superior LED Benefits

$149.80 $52.56

Page: 2