
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Explosion Proof LED Light - 12,000 Lumens - Class 1 Div 1 & Class 2 Div 1 - Adustable J-Bracket
Part #: EPL-JH16C-1MLED-100
Made in the USA
The EPL-JH16C-1MLED-100 Explosion Proof LED Light from Larson Electronics is rated Class 1 Division 1-2 Groups C & D and Class 2
Division 1-2 and uses LEDs to produce 10,000 lumens of light while drawing only 150 watts. This hazardous area LED light comes
attached to an aluminum rail/ladder mount bracket that allows operators to easily mount this unit to ladders, handrails, catwalks and
other similar structures.
The EPL-JH16C-1MLED-100 explosion proof LED light provides 8,000 square feet of work area coverage with 10,000 lumens of light output.
This portable LED light has an angle adjustable light head measuring 16 inches in diameter and an aluminum rail/ladder bracket that can be
adjusted from 26 inches to 43 inches to allow mounting to a wide variety of railings, scaffoldings or ladders. This explosion proof LED light has a
light head measuring only 16" in diameter, which allows it to fit through most standard sized manholes and entryways and produces a brilliant
flood pattern of light that is ideal for illuminating large enclosed areas, further adding to this unit's desirability as a portable hazardous area
lighting solution.
Page: 1

Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge
Page: 2

Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Mounted at 10' Mounted at 12' Mounted at 15'
The above images display the EPL-JH16C-1MLED illuminating a take with a 90' circumference at three different heights.
Page: 3

Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light
emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
This portable LED light is comprised of a 16 inch LED light head mounted to an aluminum bracket with an adjustable J shaped bottom hook that
enables operators to securely mount the light to any ladder or scaffolding. Lamp adjustment is via an adjustable yolk that allows the operator to
position the lamp angle through a full 90 degrees of vertical adjustment. All hardware on this unit is non sparking/corrosion resistant and
the power cord is resistant to damage from chemicals and abrasion. Included with this LED light cart is 100 feet of SOOW cord terminating in an
explosion proof plug, which combined with the 90 degrees of tilt offered by the LED light head provides an effective alternative to often
cumbersome explosion proof string lights.
This unit is universal voltage and can be can be operated with 120-277 VAC, 50/60Hz. 25 peel off mylar overspray lamp protectors ship with this
ladder rack mount light, further adding to the versatility and convenience this LED light. The protectors provide lamp protection from dirt or debris
and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This lamp is T5 temperature rated
and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps.
Made in USA Quality Superior LED Benefits
1. Approved Class 1 Div1-2 Class II Div I-2.
2. Fixture arrives assembled and lamped to reduce installation time and
cost.
3. J-Bracket constructed of non sparking aluminum.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Light weight and High Output.
7. 25 peel off mylar overspray lamp protectors ship with the unit.
8. 10,000 Lumens from only 150 watts.
9. Mercury free shock proof LED lamp light head.
Specifications / Additional Information
EPL-JH16C-1MLED-100 Explosion Proof Tank Light Approvals
Listing: United States Class 1 Division 1, Groups C and D
Dimensions: 16" Light head Class 1 Division 2, Group A,B,C,D
Weight: 55 Lbs Class II, Division 1 - 2, Groups E,F,G
Total Watts: 150 watts cETL Certified to UL844 and C22.2 Standards
Voltage: Universal 120-277V AC 50/60 Hz ECP1523 Class 1 explosion proof plug
Operating Temp Range: -40°C to +65°C
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
LED Lamp Life Expectancy: 60,000 Hours Special Orders- Requirements
Mounting: Aluminum Ladder/Rail J-Bracket Contact us for special requirements
Wiring: 100 feet SOOW Cord Explosion Proof Straight Blade Plug Phone: 1-214-616-6180
Beam Lux: 8500@ 1 Meter 1250@ 3 Meters Toll Free: 1-800-369-6671
Color Temp: 6000K Fax: 1-903-498-3364
E-mail: sales@larsonelectronics.com
Scroll Down to Purchase-
Page: 4

Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Part #: EPL-JH16C-1MLED-100 (48626)
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
Page: 5

Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
- Manual
- STEP
- DXF
- Hi-Res Image 1 -
- Hi-Res Image 2 -
- Hi-Res Image 3 -
- Hi-Res Image 4 -
Page: 6