Larson Electronics EPL-IBM-FA-3X150LED-RT User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Explosion Proof 450 Watt I-Beam Mount High Bay LED Fixture With Aluminum Bracket Class 1 Division 1

Part #: EPL-IBM-FA-3X150LED-RT

Made in the USA

The Larson Electronics EPL-IBM-FA-3X150LED-RT Explosion Proof I-Beam mount light fixture provides operators with a powerful and
energy efficient alternative to traditional hazardous location luminaries. LED technology and compact design makes this lamp an
excellent replacement upgrade option for bulky and high maintenance cost older fixtures. This fixture is designed for mounting to high
bay and wall I-beams.

***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***

This Class 1 Division 1 & 2, Class 2 Division 1 & 2 explosion proof light fixture provides 37,500 of high quality light while drawing only 450 watts.
The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance while the heavy duty
aluminum guard and wire mesh protects the fixture from potential damage. Special heat dissipating design in conjunction with LED technology
helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. LED technology and compact design makes this
lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium
lights.
The explosion proof LED light head in this unit features multiple LED drivers which help increase the operational life of the fixture. With traditional
LED lights, in the event that an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED work lamps by Larson
Electronics contains thirty-six individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual
driver. In the event a driver fails, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED
failure, the mating LED will continue to operate.

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light
emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
This light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of this LED fixture
that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high
pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration
and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.
This LED light produces 37,500 lumens with a color temperature of 5600K and a color rendering index of 75 which produces colors and details
much more accurately than high pressure sodium or mercury vapor luminaries. The EPL-IBM-FA-3X150LED-RT specially designed I-beam
mount allowed operators to install this high bay light fixture on existing I-beams via nine per-drilled holes. After installation, operators can tilt the
light 90° in both directions, allowing for precise aiming. The EPL-IBM-FA-3X150LED-RT is LEL approved for LED quality and energy efficiency
for commercial locations and applicable for Class 1 Division 1 work areas, such as tanks and refineries, silos, loading facilities, and other similar
environments.

High Quality Features Superior LED Benefits

1. Low power consumption.

2. Instant on/off operation.

3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.

4. Superior color rendering compared to HPS, LPS, MH.

5. Retains 70% lumen output after 60,000 operating hours.

6. Powder coated aluminum fixture body.

7. Swivel I-Beam mount included

8. Low profile - Light weight

9. 36,700 Lumen output from 450 watts

1. 60,000 hour lifespan.

2. Can SAVE 50% or more on energy.

3. Qualifies retrofit projects for financial incentives, including utility
rebates, tax credits and energy loan programs.

4. Reduces energy use and prolongs life-spans of peripheral cooling
units (A/C, refrigeration)

5. 100% recyclable.

6. No toxins-lead, mercury.

7. No UV light, infrared radiation or CO2 emissions.

8. Qualifies buildings for LED and other sustainable business
certifications.

9. Bright, even light maintains consistent color over time.

10. Instant on/off – No flickering, delays or buzzing.

11. Very good color rendering.

12. Vibration/impact resistant.

13. Significantly cooler operation.

14. Less frequent outages, higher output improves workplace safety.

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

EPL-IBM-FA-3X150LED-RT LED High Bay LED Light Ratings/Approvals
Lamp Type: LED Class 1 Division 1, Groups C and D
Dimensions: 42.9 "-L x 16.763"-W x 23.271"-H Class 1 Division 2, Groups A,B,C,D
Total Watts: 450W Class 2, Divisions 1 & 2, Groups E,F,G
Lumens: 37,500 Class 3, Divisions 1 & 2
Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC T5 Temperature Rating
Mounting: I-Beam Mount Swivel Bracket Certified to UL844 and C22.2 Standards
Weight: 110lbs Paint Spray Booth Approved
Lighting Configuration: Flood Pattern LEL Approved
Operating Temp Rating: T5 -50C to +85C IP67 Rated Waterproof
Color Temp: 5600K Multiple Driver Banks
Lamp Life: 60,000+ Hours 80% Lumen Retention after 60,000 Hours
Color Rendering Index: >75 CRI
Lamp Life: 60,000+ Hours
LED Driver Specs
Input Voltage: 100-277 Volts AC Special Orders- Requirements
Power Factor: >98% Contact us for special requirements
Efficiency: >88% Toll Free: 1-800-369-6671
Output Voltage: 54V Max Intl: 1-903-498-3363
Warranty: Yes - 5 Year - 10 Year Warranty Available E-mail: [e-mail]

*5 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement. Please click here to see our 5 Year Warranty pamphlet.

Scroll Down to Purchase-

Part #: EPL-IBM-FA-3X150LED-RT (71507)

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- Dimensional Drawing

- Hi-Res Image 1 - Explosion Proof 450 Watt I-Beam Mount High Bay LED Fixture

- Hi-Res Image 2 - Explosion Proof 450 Watt I-Beam Mount High Bay LED Fixture

- Hi-Res Image 3 - Explosion Proof 450 Watt I-Beam Mount High Bay LED Fixture

- Hi-Res Image 4 - Explosion Proof 450 Watt I-Beam Mount High Bay LED Fixture

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

- Hi-Res Image 5 - Explosion Proof 450 Watt I-Beam Mount High Bay LED Fixture

Page: 6