Larson Electronics EPL-HB-2X150LED-RT-60DB-56K User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Class 1 Division 1 Explosion Proof 300 Watt High Bay LED Light Fixture - Paint Spray Booth Approved

Part #: EPL-HB-2X150LED-RT

Made in the USA

The Larson Electronics EPL-HB-2X150LED-RT-1227-60DB-56K Explosion Proof High Bay light fixture provides operators with a
powerful and energy efficient alternative to traditional hazardous location luminaries. LED technology and compact design makes this
lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures.

***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***

This Class 1 Division 1 & 2, Class 2 Division 1 & 2 explosion proof light fixture provides 25,000 of high quality light while drawing only 300 watts.
The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating
design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light
weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.

Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

The explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED
lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twenty-four
individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver
failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED
will continue to operate.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light
emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
This light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of this LED fixture
that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high
pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration
and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.
This LED light produces 25,000 lumens with a color temperature of 5600K standard and a color rendering index of 75 which produces colors and
details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4500K natural
white color temperature options (longer lead times may apply for non-standard temperatures). The EPL-HB-2X150LED-RT-1227-60DB-56K
offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this
explosion proof LED fixture includes a pendant mount and a surface mount option.

High Quality Features Superior LED Benefits

1. Low power consumption.

2. Instant on/off operation.

3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.

4. Superior color rendering compared to HPS, LPS, MH.

5. Retains 80% lumen output after 60,000 operating hours.

6. Powder coated aluminum fixture body.

7. Pendant and Swivel Bracket mount included

8. Low profile - Light weight

9. 25,000 Lumen output from only 300 watts

10. Multiple LED Driver Banks for Redundancy

11. Paint Spray Booth Approved

12. LEL Approved for Rebates

1. 60,000 hour lifespan.

2. Can SAVE 50% or more on energy.

3. Qualifies retrofit projects for financial incentives, including utility
rebates, tax credits and energy loan programs.

4. Reduces energy use and prolongs life-spans of peripheral cooling
units (A/C, refrigeration)

5. 100% recyclable.

6. No toxins-lead, mercury.

7. No UV light, infrared radiation or CO2 emissions.

8. Qualifies buildings for LED and other sustainable business
certifications.

9. Bright, even light maintains consistent color over time.

10. Instant on/off – No flickering, delays or buzzing.

11. Very good color rendering.

12. Vibration/impact resistant.

13. Significantly cooler operation.

14. Less frequent outages, higher output improves workplace safety.

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

EPL-HB-2X150LED-RT-1227-60DB-56K - C1D1 High Bay LED Light Ratings/Approvals
Lamp Type: LED Class 1 Division 1, Groups C and D
Dimensions: 28"L x 16"W 5"D Class 1 Division 2, Groups A, B, C, D
Total Watts: 300W Class 2, Divisions 1 & 2, Groups E,F,G
Lumens: 25,000 Class 3, Divisions 1 & 2
Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC T5 Temperature Rating
Mounting: Surface Mount Bracket Certified to UL844 and C22.2 Standards
Weight: 64lbs Paint Spray Booth Approved
Lighting Configuration: Flood Pattern LEL Approved
Temp Rating: -50°C to +85°C IP67 Rated Waterproof
Color Temp: 5600K, 4500K, 3000K Multiple Driver Banks
Color Rendering Index: >75 80% Lumen Retention after 50,000 Hours
Lamp Life: 60,000+ Hours
LED Driver Specs
Input Voltage: 100-277 Volts AC
Input Current: 3.6A Max
Power Factor: >98% Special Orders- Requirements
Efficiency: >88% Contact us for special requirements
Output Voltage: 54V Max Toll Free: 1-800-369-6671
Output Current: 4.2A Intl: 1-903-498-3363
Warranty: Yes - 5 Year - 10 Year Warranty Available E-mail: [e-mail]

*5 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement. Please click here to see our 5 Year Warranty pamphlet.

Scroll Down to Purchase-

Part #: EPL-HB-2X150LED-RT (71050)

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- SpecSheet French

- SpecSheet Arabic

- IES

- Hi-Res Image 1 -- EPL-HB-2X150LED-RT Top

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

- Hi-Res Image 2 -- EPL-HB-2X150LED-RT Front

- Hi-Res Image 3 -- EPL-HB-2X150LED-RT Side

- Hi-Res Image 4 -- EPL-HB-2X150LED-RT Top Side

- Hi-Res Image 5 -- EPL-HB-2X150LED-RT Back Angle

- Hi-Res Image 6 -- EPL-HB-2X150LED-RT Back

- Hi-Res Image 7 -- EPL-HB-2X150LED-RT Side

- Hi-Res Image 8 -- EPL-HB-2X150LED-RT Front

- Hi-Res Image 9 -- EPL-HB-2X150LED-RT Inlet

- Hi-Res Image 10 -- EPL-HB-2X150LED-RT Bottom Side

Page: 6