Larson Electronics EPL-HB-100LED-RT-UVA User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture - Paint Booths - 365NM

Part #: EPL-HB-100LED-RT-UVA

The Larson Electronics EPL-HB-100LED-RT-UVA Explosion Proof Ultraviolet light fixture provides operators with a powerful and
energy efficient alternative to traditional hazardous location luminaries with UV cutoff filters. LED technology and compact design
makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and
high pressure sodium lights. This fixture uses advanced LED light technology to produce ultraviolet light and is T6 rated for hazardous
locations where UV lamps are used in paint and adhesive curing, food inspection or for non-destructive testing.

This Class 1 Division 1 & 2, Class 2 Division 1 & 2 explosion proof UV light fixture provides 35,000 mW of high quality ultraviolet light while
drawing only 100 watts. This high output UV LED fixture provides a 4,800 µW/cm2 center beam maximum intensity at 12" while providing a
minumum 2,000 µW/cm2 intensity over a 14" by 14" area. The EPL-HB-100LED-RT-UVA is typically used for curing coatings or adhesives and for
non-destructive testing applications. This fixture has been thoroughly tested with the DuPont line of ultraviolet curable paint and primers,
excellerating the cure times over metal halide fixtures with surface temperatures as low at 55°F.
The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating
design in conjunction with LED technology helps this fixture to achieve an excellent 50,000 hour rated lifespan with 80% intensity retention. Light
weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. This
fixture can operate on voltages ranging from 120V-277V 50/60Hz and is ETL approved for use in hazardous environments, paint spray booths,
wet environments, and areas where UV lamps are used in paint and adhesive curing, food inspection, and for non-destructive testing.

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

The explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED
lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual
LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only
one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue
to operate.
The EPL-HB-100LED-RT-UVA uses ultraviolet LED light technology, a technology that is far better in energy saving than traditional fluorescent
bulbs used for the same purposes. Traditional ultraviolet lights require a coating to block out visible light or a special composition of gases and
chemicals used to create a higher concentration of ultraviolet light. This process, however, also produces many other wavelengths of light which
go unused and end up as wasted energy. LED lights are unique in that they have a narrower wavelength band than traditional ultraviolet sources
and therefore do not require these special coatings. As a result, LED lights do not produce unused, wasted light and therefore consume less
energy than traditional UV lights on the market. LED lights have the added benefit of being capable of producing very specific wavelengths with
tighter curves and are more durable and light weight as well. This eliminates harmful UV-B and UV-C wavelengths from being emitted from the
light source, adding in productivity and safety during operation.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-Striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light
emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.

400W MH 100W LED

Wattage 400 watts 100 watts
Amp Draw @ 120V AC 3.34 amps 0.84 amps
Amp Draw @ 24V DC 16.67 amps 4.17 amps
Lamp Life Expectancy 15,000 50,000+ Hours
Wavelength 320-400NM 350-380NM
Operation Cost per Year (8hs/day @ 11c/kWh) $138.12 $32.12

The Class 1 & 2, Division 1 & 2 LED ultraviolet light fixture can be used for non-destructive testing in aviation and manufacturing, food processing
and inspection, and in paint, coating, and adhesive curing. The EPL-HB-100LED-RT-UVA provides operators in hazardous locations with a
reliable and durable UV lighting solution that combines effective production of UV light with explosion proof protection and is applicable for leak
detection, paint spray booths, ink, coatings, and adhesive curing, non-destructive testing, inspection, and food processing.
This light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of this LED fixture
that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high
pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration
and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Click Photo to Enlarge

This LED light produces 35,000 mW with a wavelength curve of 350-380NM. The EPL-HB-100LED-RT-UVA offers several mounting options
including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture
includes a pendant mount and a surface mount option.

High Quality Features Superior LED Benefits

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

1. 50,000 hour lifespan.

2. Can SAVE 50% or more on energy.

1. Low power consumption.

2. Instant on/off operation.

3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.

4. Superior color rendering compared to HPS, LPS, MH.

5. Retains 80% intensity output after 50,000 operating hours.

6. Powder coated aluminum fixture body.

7. Pendant and Swivel Bracket mount included

8. Low profile - Light weight

9. 35,000 mW output from 100 watts.

10. 4,800 µW/cm2 center beam maximum intensity & minumum 2,000
µW/cm2 intensity covering a 14" x 14" area when measured at 12".

3. Qualifies retrofit projects for financial incentives, including utility
rebates, tax credits and energy loan programs.

4. Reduces energy use and prolongs life-Spans of peripheral cooling
units (A/C, refrigeration)

5. 100% recyclable.

6. No toxins-lead, mercury.

7. No UV light, infrared radiation or CO2 emissions.

8. Qualifies buildings for LED and other sustainable business
certifications.

9. Bright, even light maintains consistent color over time.

10. Instant on/off – No flickering, delays or buzzing.

11. Very good color rendering.

12. Vibration/impact resistant.

13. Significantly cooler operation.

14. Less frequent outages, higher output improves workplace safety.

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

EPL-HB-100LED-RT-UVA - C1D1 Ultraviolet LED Light Ratings/Approvals
Lamp Type: LED Class 1 Division 1, Groups C and D
Dimensions: 14"-H x 16"-W 5"-D Class 1 Division 2, Groups A,B,C,D
Total Watts: 100W Class 2, Divisions 1 & 2, Groups E,F,G
Total Intensity: 35,000 mW Class 3, Divisions 1 & 2
Efficiency: 350 mW/w T5 Temperature Rating
Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC Certified to UL844 and C22.2 Standards
Mounting: 3/4” Pendant and Swivel Mount are both included with this

fixture.

Weight: 28lbs LEL Approved
Lighting Configuration: Flood Pattern IP67 Rated Waterproof
Temp Rating: T5 -50C to +65C Multiple Driver Banks
Color: Ultraviolet- 365NM 80% Intensity Retention after 50,000 Hours
Wavelength Curve: 350-400NM - Peak @ 365NM
Lamp Life: 50,000+ Hours
LED Driver Specs
Input Voltage: 100-277 Volts AC or 11-25 Volts AC/DC
Input Current: 1.8A Max Special Orders- Requirements
Power Factor: 0.992 Contact us for special requirements
Output Voltage: 54V Max Toll Free: 1-800-369-6671
Output Current: 2.1A Intl: 1-903-498-3363
Warranty: Yes - 5 Year - 10 Year Warranty Available E-mail: [e-mail]

*5 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.

Scroll Down to Purchase-

Paint Spray Booth Approved

Part #: EPL-HB-100LED-RT-UVA (104729)

Page: 6

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 7

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- Dimensional Drawing

- SpectrumChart

- STEP

- Hi-Res Image 1 - Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture

Page: 8

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

- Hi-Res Image 2 - Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture

- Hi-Res Image 3 - Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture

- Hi-Res Image 4 - Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture

- Hi-Res Image 5 - Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture

- Hi-Res Image 6 - Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture

- Hi-Res Image 7 - Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture

- Hi-Res Image 8 - Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture

- Hi-Res Image 9 - Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture

- Hi-Res Image 10 - Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture

Page: 9