Larson Electronics EPLCD-48-216-50KT5HO User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Explosion Proof Paint Spray Booth Light on Dolly Cart with Wheels - 20,000 Lumens - 4 foot 4 lamp

Part #: EPLCD-48-216

Made in the USA

The Larson Electronics EPLCD-48-216 Explosion Proof Paint Spray Booth Light on Dolly Cart is U.S./Canada U.L. approved Class 1
Division 1, Class II Division 1 and offers a versatile lighting solution for applications requiring exceptional work area lighting coverage.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHT CART*

The EPLCD-48-216 dolly cart mounted explosion proof light is UL listed Class 1 Division 1 and Class II Division 1 & 2 and offers operators the
ability to quickly and easily add a full power light wherever it is needed. This unit incorporates a Larson Electronics EPL-48-2L explosion proof
fixture equipped with four T5-HO fluorescent lamps producing 20,000 lumens of light into a mobile dolly cart style platform. This configuration
allows operators to wheel this light fixture into position next to the target or lay it flat to provide illumination beneath the target.
This explosion proof light and dolly cart offers an excellent lighting solution for operators who need illumination in unusual areas where traditional
fixed mount lighting is obstructed or cannot effectively reach.
This light is also available with LED bulbs instead of fluorescent bulbs. Click here to view.

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge

The light fixture used in the EPLCD-48-216 is T6 rated and produces 20,000 lumens of light using four 54 watt T5-HO fluorescent bulbs. The
lamps are protected by heat and impact resistant Pyrex tubes and an additional Plexiglas lens which provides added protection from impacts and
overspray. The light fixture is constructed of copper free aluminum alloy and is shipped with a 50' SOOW cord and explosion proof plug. The
lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This unit is U.L. approved for use in
paint spray booths, is multi voltage capable, and also available in optional 12 VDC, 24VDC, 347 Volt and 480 Volt versions.
Suggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing
plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.

Made in USA Quality Lamp Options

1. Each unit dialectically tested.

2. Fixture arrives assembled and lamped to reduce installation time and
cost. Dolly cart mounting provides versatility and allows the unit to be
positioned for optimal light coverage of the work area.

3. Light fixture constructed of extruded corrosion resistant copper free
aluminum alloy.

4. Over-sized, finned ballast housing for 800 mA fixtures provides more
heat dissipation and extends ballast life. Larger ballast box
accommodates High Output lamp ballasts. Ballast housing easily
accessible and externally mounted. Top and bottom covers secured
with nuts and bolts, instead of threaded through holes, which can be
damaged with dirt.

5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.

6. A wrench is used to unscrew the end caps for relamping the fixture,
while other models require the “tap and knock off” method to loosen the
end cap.

7. Pyrex tubes, a wire mesh guard, and replaceable Plexiglas lens
protects fixture from overspray and random impacts.

8. Spring loaded sockets on both ends hold lamps firmly for maximum
shock and vibration protection.

F54-T5/850/HO – 54 watt, 5000 lumens per bulb, 20,000 hours life,
5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and
HPF .98 (Suffix –50KT5)
F54-T5/841/HO - 50 watt, 4450 lumens per bulb, 20,000 hour life, 4100
Kelvin color, CRI 85 (Suffix -41KT5)

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

EPLCD-48-216 Explosion Proof Light Fixture U.L. Ratings
UL Listing: United States - Canada Class 1 Division 1, Groups C and D
Dimensions: W-11.25" L-52 " H-8.5" Class 1 Division 2, Group A,B,C,D
Total Unit Weight: 65Lbs UL 595 Outdoor Marine Type (Saltwater)
Total Watts: 216 watts UL 844, 924
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz: UL 1598A Marine Type
Total Lumens: STD-T5-HO Bulbs 20,000 Class II Division 1- 2, Groups E,F,G
Lamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours UL Certified Canadian Approval Standards
Efficiency: STD-T5-HO Bulbs 92 Lumens per Watt UL listed for Paint Spray Booths*
Operating Temp Range: T6 Rated* -30 C to 70 C
Minimum Operating Temp: -30 C Special Orders- Requirements
Maximum Case Temp: 90 C Contact us for special requirements
Beam Angle: N/A Toll Free: 1-800-369-6671
Color Temp: 5000K or 4100K T5-HO Bulbs Fax: [phone]
Mounting: Portable Dolly Cart with Wheels E-mail: [e-mail]
Optional Voltages: 12 VDC, 24 VDC, 347 Volts, 480 Volts

U.L Approval: U.S Certificate Canada Certificate

*5 year warranty replacement on this light. After 30 days, the customer
ships the failed light to Larson Electronics at their expense. If the failure
is a manufacturer defect, we will ship a new replacement to the
customer. If failure occurs within 30 days of receipt, Larson Electronics
will provide a return label via email to the customer. When the failed
light is returned, Larson Electronics will ship a new replacement.

Scroll Down to Purchase-

Part #: EPLCD-48-216 (64383)

Page: 3