Larson Electronics EPL-BS-161M-100 User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Explosion Proof LED Light - Non-Spark Aluminum Base - Single 150 Watt Led Light

Part #: EPL-BS-161M-100

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

The EPL-BS-161M-100 Explosion Proof LED Light from Larson Electronics is rated Class 1 Division 1-2 Groups C & D and Class 2
Division 1-2 and uses a 16 inch LED light head to produce 10,000 lumens of light while drawing only 150 watts.

The EPL-BS-161M-100 explosion proof LED light provides 8,000 square feet of work area coverage with 10,000 lumens of light output. This
portable LED light is mounted to a spun aluminum base and has an LED light head measuring 16 inches in diameter. The LED light head on this
unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flammable vapors, gases
and dusts may be present.

This explosion proof LED light fixture is comprised of a 16 inch LED light head mounted atop a base stand fabricated from non sparking spun
aluminum with a convenient carrying handle built into the top of the stand. The lamp can be easily adjusted up or down 90 degrees and locked
into position by simply loosening the two hand screws located on either side of the light head and retightening them once the desired angle is
found. Included with this LED light is 100 feet of SOOW cord terminated in an 1523 explosion proof straight blade plug.
This unit is also multi-voltage capable and can be configured to operate on 120-277 volts 50/60 Hz. Further adding to the versatility and
convenience of this explosion proof LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp
protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This
lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or
fluorescent lamps.

Made in USA Quality Superior LED Benefits

1. Approved Class 1 Div1-2 Class2 Div I-2

2. Led lamp head requires no lamping.

3. Durable Base Mount constructed of copper free aluminum.

4. No ballast box. No ballast to replace.

5. Extreme long life LEDs reduce maintenance and replacement costs.

6. Adjustable LED light head.

7. 25 peel off mylar overspray lamp protectors ship with the unit.

8. 10,000 Lumens produced from only 150 watts.

9. Mercury free shock proof LED lamp light head.

1. 50,000+ hour lifespan.

2. Can SAVE 50% or more on energy.

3. 100% recyclable.

4. No toxins-lead, mercury.

5. No UV light, infrared radiation or CO2 emissions.

6. Bright, even light maintains consistent color over time.

7. Instant on/off – No flickering, delays or buzzing.

8. Very good color rendering.

9. Vibration/impact resistant.

10. Significantly cooler operation.

11. Less frequent outages, higher output improves workplace safety.

Page: 2