Larson Electronics EPL-48-4L-T8-SFC, EPL-48-4L-T5HO-SFC, EPL-48-4L-T8-PND, EPL-48-4L-T5HO-PND User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Explosion Proof Fluorescent Lights for Paint Booths - 4 foot - 4 lamp

Part #: EPL-48-4L

Made in the USA

The Larson Electronics EPL-48-4L Explosion Proof Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 1, Class 1
Division 2 and ideal for hazardous locations where flammable petrochemical vapor or combustible dust exists or has the potential to
exist. The unit has a T6 temperature rating and is approved for paint spray booths.

***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***

The EPL-48-4L is our 4 foot long, 4 lamp, UL listed Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light which is
also approved for use in paint spray booth applications. This T6 temperature rated fixture comes standard with four fluorescent lamps. This
fixture is multi-voltage capable with 347 Volt and 480 Volt versions available upon request. The EPL-48-4L provides operators in hazardous
locations with a powerful and affordable lighting solution that provides the best explosion proof protection available without sacrificing fixture
durability.

Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

NOTE ON LAMPS: We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. However, we standardize on the T-5HO bulbs

mostly for longevity and high output. However, many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing
plants operate in very cold conditions, and T-12HO bulbs operate well in those environments. The T12VHO, 110 watt Very High Output lamps
make this fixture an ideal replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class 1 Division 1
rated lights. *However, the 110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications.
Mounting options: Standard surface mounting via our L-brackets attached to Unistruts. Pendant mounting is available for greater distancing of
the fixture from the mounting surface (upon request) The Unistrut is attached to our standard L-bracket mounts. These L-bracket mounts can be
adjusted to create angle mounts. As illustrated in the photos above, the series of mounting holes at the top of the bracket enable this explosion
proof light to be attached to any wall, ceiling or floor surface. A simple through bolt can be used to secure the light to the surface. A single
junction box at one end of the light is provided for the electrical connection.
Suggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing
plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.

Made in USA Quality Lamp Options

1. Each unit dialectically tested.

2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.

3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.

4. Over-sized, finned ballast housing for 800 mA fixtures provides more
heat dissipation and extends ballast life. Larger ballast box
accommodates High Output lamp ballasts. Ballast housing easily
accessible and externally mounted. Top and bottom covers secured
with nuts and bolts, instead of threaded through holes, which can be
damaged with dirt.

5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.

6. A wrench is used to unscrew the end caps for relamping the fixture,
while other models require the “tap and knock off” method to loosen the
end cap.

7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
protection.

8. Spring loaded sockets on both ends hold lamps firmly for maximum
shock and vibration protection.

F54T5HO-850 – 54 watt, 5000 lumens per bulb, 20,000 hour life, 5000
Kelvin color (Suffix –T5)
F48T12HO-CW – 60 watt, 4050 lumens per bulb, 12,000 hours life,
4100 Kelvin color (Suffix –T12HO)
F32T8-841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100
Kelvin color (Suffix –T8)
F48-T8/HO - 48 watt, 4000 lumens per bulb, 18,000 hours life, 4100
Kelvin color (Suffix -T8HO)
T12HO with magnetic ballast for high heat configurations (hot box
explosion proof light applications) - 60 watt, 4050 lumens per bulbs ­This bulb, ballast and wiring configuration is designed for application to
165 degrees C.
F48-T12-D-HO – 60 watt, 4050 lumens per bulb, 12,000 hours life,
5100 Kelvin color (76 CRI - Color Rendition) - This specialty lamp is
designed to mimic daylight conditions. For paint spray booth operators
requiring a brighter color light than a traditional "cool white", this bulb
can be useful. (Suffix –T12DHO)
F-48-T12-VHO – 110 watt, 7000 lumens per bulb, 12,000 hours life,
4200 Kelvin color (Suffix –T12VHO) NOTE: the 110 watt lamps raise
the temperature rating from T5 to T6, which is NOT appropriate for
paint spray booth applications. The fixture is still Class 1 Division 1
rated, however, this fixture is no longer paint spray booth certified with
the 110 watt Very High Output lamp.

Page: 2