Larson Electronics EPL-48-2L-T5HO-PND, EPL-48-2L-T8-SFC User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

EPL-48-2L - Explosion Proof, Waterproof Fluorescent Lights -Paint Booth, Rigs - 2 Lamp - 4 foot

Part #: EPL-48-2L

Made in the USA

The Larson Electronics EPL-48-2L Explosion Proof Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 1 and
Class 1 Division 2 for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist. The
unit carries a T6 temperature rating, it is also approved for Paint Spray Booths.

The EPL-48-2L fixture is a 4 foot long, 2 lamp, UL listed Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light which is
also approved for use in paint spray booth applications. This T6 temperature rated fixture comes standard with two fluorescent lamps. Lamp
choices include T5HO, T12HO, and T8. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of
copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish.This
fixture is multi-voltage capable and is available with a variety of lamp options. The EPL-48-2L provides operators in hazardous locations with a
reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture
durability.

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. However, we standardize on the T-5HO bulbs mostly for longevity
and high output. However, many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing plants operate in very
cold conditions, and T-12HO bulbs operate well in those environments. Larson Electronics offers a T12VHO lamp option, 110 watt Very High
Output lamps make this fixture an ideal replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class
1 Division 1 rated lights. *However, the 110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications.

T5HO T8 LED

Wattage 108 watts 64 watts 48 watts
Amp Draw @ 120V AC 0.9 amps 0.54 amps 0.4 amps
Amp Draw @ 277V AC 0.39 amps 0.24 amps 0.18 amps
Amp Draw @ 12V DC 9 amps 5.34 amps 4 amps
Amp Draw @ 24V DC 4.5 amps 2.67 amps 2 amps
Lamp Life Expectancy 20,000 hours 24,000 hours 50,000 hours
Color Temperature 5000K / 4100K 4100K 5300K
Operation cost per year

(8hs/day @ 11c/kWh)

Click here to see the LED version of this fixture
Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below.

We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).
Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting
configurations.
Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is
set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt
hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or
wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.
Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction
box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting
hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The
adjustable L-shape mounting bracket provides support for the opposite end of the fixture.

Made in USA Quality Lamp Options

$34.69 $20.56 $15.42

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

1. Each unit dialectically tested.

2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.

3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.

4. Over-sized, finned ballast housing for 800 mA fixtures provides more
heat dissipation and extends ballast life. Larger ballast box
accommodates High Output lamp ballasts. Ballast housing easily
accessible and externally mounted. Top and bottom covers secured
with nuts and bolts, instead of threaded through holes, which can be
damaged with dirt.

5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.

6. A wrench is used to unscrew the end caps for relamping the fixture,
while other models require the “tap and knock off” method to loosen the
end cap.

7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
protection.

F54-T5/850/HO – 54 watt, 5000 lumens per bulb, 20,000 hours life,
5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and
HPF .98 (Suffix –50KT5)
F54-T5/841/HO - 54 watt, 5000 lumens per bulb, 20,000 hours life,
4100 Kelvin color, CRI 85 (Suffix -41KT5)
F48-T12/HO – 60 watt, 4050 lumens per bulb, 12,000 hours life, 4100
Kelvin color (Suffix –T12HO)
F32-T8/841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100
Kelvin color (Suffix –T8)
T12HB with magnetic ballast for high heat configurations ("hot box"
explosion proof light applications) - 60 watt, 4050 lumens per bulbs ­This bulb, ballast and wiring configuration is designed for applications
to 165 degrees C.

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

EPL-48-2L Explosion Proof Ratings/Approvals
Listing: United States - Canada Class I Division 1, Groups C and D T6
Dimensions: W-11.25" x L-52" x H-8.5 " Class I Division 2, Group A,B,C,D
Weight: 65 Lbs Class II, Division 1 & 2, Groups E,F,G
Voltage: Universal 120-277VAC 50/60 Hz UL 595 Marine Type (Saltwater)
Total Watts: 108W (T5HO, 64W (T8), 120W (T12HO) UL 844
Total Lumens: 10,000 (T5HO), 5,900 (T8), 8,100 (T12HO) UL 1598 Marine Type
Lamp Life Expectancy (Hrs): 20,000 (T5HO), 24,000 (T8), 12,000

(T12HO)
Luminous Efficiency (Lm/W): 95.59 (T5HO), 92.19 (T8), 67.5

(T12HO)

Color Temp: 5000K (T5HO/T8), 41000K (T5HO/T8), 4000K (T12HO) ABS Certified
Beam Angle: 150° California Title 24 Compliant
Ambient Operating Temp Range: -20°C to +70°C IP67 Rated - Waterproof
Operating Temp Rating: T6 Rated T6 Temperature Rating
Minimum Operating Temp: -30°C NEMA 4X
Maximum Case Temp: +90°C Approved for Confined Spares
Housing Material: Cast Aluminum End Caps, Aluminum Reflectors -

Copper Free

Lens Material: Hardened Borosilicate Glass Tubes Special Orders- Requirements
Gasket Material: Buna Rubber O-Rings Contact us for special requirements
Mounting: Surface Standard - Pendant Optional Phone: [phone]
Wiring Hub: 1/2" NPT Toll Free: 1-800-369-6671
Warranty: 5 Years* Fax: [phone]

Certified Canadian Standards

Listed for Paint Spray Booths

U.L Approval: U.S Certificate Canada Certificate E-mail: [e-mail]
*Temperatures above +65° C will diminish ballast life from 5 years to 3

years
*5 year warranty replacement on this LED light (or LED bulbs for light

fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, we will ship a new replacement.

Scroll Down to Purchase-

Part #: EPL-48-2L (1758)

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 6

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- SpecSheet French

- SpecSheet Arabic

- SpecSheet Spanish

- Dimensional Drawing

- Manual

- IES

Page: 7

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

- STEP

- Hi-Res Image 1 -

- Hi-Res Image 2 -

- Hi-Res Image 3 -

- Hi-Res Image 4 -

- Hi-Res Image 5 -

- Hi-Res Image 6 -

- Hi-Res Image 7 -

- Hi-Res Image 8 -

- Hi-Res Image 9 -

- Hi-Res Image 10 -

Page: 8