Larson Electronics EPL-24-2L-T5HO-PND, EPL-24-2L-T8-PND, EPL-24-2L-T8-SFC, EPL-24-2L-T5HO-SFC User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Explosion Proof Fluorescent Lights for Paint Booths, Oil Rigs, Boats -2 foot - 2 lamp -Multi-voltage

Part #: EPL-24-2L

Made in the USA

The Larson Electronics EPL-24-2L Explosion Proof Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 1, Class 2
Division 1 and for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist.

The EPL-24-2L fixture is a 2 foot long, 2 lamp, UL listed Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light and an
ideal choice for use in applications where space is at a premium. This T6 temperature rated fixture comes standard with F24-T5/HO lamps and is
available with a variety of lamp options which are listed below. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture
is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss
reflective finish. This fixture is multi-voltage capable and is U.L. approved for use in paint spray booths.
The EPL-24-2L provides operators in hazardous locations with a compact, reliable and affordable lighting solution that provides the best
explosion proof protection available without sacrificing light quality or fixture durability.

Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

NOTE ON LAMPS: We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. We standardize on the T5HO bulbs mostly for

their longevity and high output. However, many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing plants
operate in very cold conditions and T12HO bulbs operate well in those environments. The T12VHO, 110 watt Very High Output lamps make this
fixture an ideal replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class 1 Division 1 rated lights.
*However, the 110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications.
Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown in the
photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or
conduit).
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by
tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at
the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the
light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown
above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the
opposite end of the fluorescent light.

Made in USA Quality Lamp Options

1. Each unit dialectically tested.

2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.

3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.

4. Over-sized, finned ballast housing for 800 mA fixtures provides more
heat dissipation and extends ballast life. Ballast housing easily
accessible and externally mounted. Top and bottom covers secured
with nuts and bolts, instead of threaded through holes, which can be
damaged with dirt.

5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.

6. A wrench is used to unscrew the end caps for relamping the fixture,
while other models require the “tap and knock off” method to loosen the
end cap.

7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
protection.

F24-T5HO – 2000 lumens per bulb (4000 lumens total), 20,000 hours
life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10%
and HPF .98

F24-T12/HO – 1650 lumens per bulb (3300 lumens) 9,000 hours life,
4100 Kelvin color

F17-T8 – 1325 lumens per bulb (2650 lumens total), 24,000 hours life,
4100 Kelvin color

F24-T12-D-HO – 1650 lumens per bulb (3300 lumens), 9,000 hours
life, 5100 Kelvin color (76 CRI - Color Rendition) - This specialty lamp
is designed to mimic daylight conditions. For paint spray booth
operators requiring a brighter color light than a traditional "cool white",
this bulb can be useful.
Note: There is some confusion on T-12 bulbs. There are 2 types of T­12 bulbs. The older T-12 bulbs ran on magnetic ballasts. Those
ballasts have vanished and the T-12 bulbs that work with those ballasts
are vanishing as well. All of our explosion proof fluorescent fixtures use
electronic ballasts and the F48-T12/HO bulb is widely available and low
cost to replace. We use Philips bulbs and they plan to continue the T­12 series indefinitely, as does GE. In fact, GE is now selling an
electronic ballast replacement for T12 based fixtures that formerly
operated with their magnetic ballasts.

Click here to see the LED version of this fixture

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

EPL-24-2L Explosion Proof U.L. Ratings
UL Listing: United States - Canada Class 1 Division 1, Groups C and D
Dimensions: W-11.25" L-27.5" H-8.5 " Class 1 Division 2, Group A,B,C,D
Weight: 55 Lbs Class II Division 1- 2, Groups E,F,G
Total Watts: 48 watts* UL 844, 924
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz UL 1598 Marine Type
Total Lumens: STD-T5-HO Bulbs 4000 UL 595 Outdoor Marine Type (Saltwater)
Lamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours UL listed for Paint Spray Booths*
Efficiency: STD-T5-HO Bulbs 83 Lumens per Watt California Title 24 Compliant
Ambient Operating Temp Range:-30 C to 70 C
Beam Angle: N/A Special Orders- Requirements
Color Temp: 4100K- Contact us for special requirements
Mounting: Bracket Standard - Pendant Optional Phone: [phone]
Wiring Hub: 1/2 inch threaded Toll Free: 1-800-369-6671
U.L Approval: U.S Certificate Canada Certificate Fax: [phone]
Operating Temp Rating: T6 Rated E-mail: [e-mail]
Minimum Operating Temp: -30 C
Maximum Case Temp: 90 C

*Wattage totals are lamps only and may vary with different lamps.

*5 year warranty replacement on this light (or bulbs for light fixtures
with removable bulbs). After 30 days, the customer ships the failed light
and/or bulb to Larson Electronics at their expense. If the failure is a
manufacturer defect, we will ship a new replacement to the customer. If
failure occurs within 30 days of receipt, Larson Electronics will provide
a return label via email to the customer. When the failed light is
returned, we will ship a new replacement.

Scroll Down to Purchase- Please note: 2 day lead time on this light.

Part #: EPL-24-2L (1797)

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- SpecSheet French

- SpecSheet Arabic

- Dimensional Drawing

- Manual

- IES

- STEP

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

- EASM

- Hi Res Image 1 - Front Image of the EPL-24-2L with T5HO Bulbs

- Hi Res Image 2 - Surface Mount Brackets

- Hi Res Image 3 - Surface Mount Brackets

- Hi Res Image 4 - Close up Image of the EPL-24-2L

- Hi Res Image 5 - Pendant Mount Brackets

- Hi Res Image 6 - Pendant Mount Brackets

- Hi Res Image 7 - Front Image of the EPL-24-2L with T8 Bulbs

Page: 6