Larson Electronics EPL-24-192-50KT5HO-SFC, EPL-24-192-50KT5HO-PND User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Explosion Proof Fluorescent Light for Paint Booths, Oil Rigs, Boats -2 Foot-8 Lamp-T5HO Bulbs

Part #: EPL-24-192

Made in the USA

The Larson Electronics EPL-24-192 Explosion Proof Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 1, Class
2 Division 1 and ideal for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist.

***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***

The EPL-24-192 fixture is a 2 foot long, 8 lamp, UL listed Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light and an
ideal choice for use in applications where space is at a premium. This T6 temperature rated fixture comes standard with F24-T5/HO lamps. The
lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors
are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is U.L.
approved for use in paint spray booths.
The EPL-24-192 provides operators in hazardous locations with a compact, reliable and affordable lighting solution that provides the best
explosion proof protection available without sacrificing light quality or fixture durability.

Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown in the

photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or
conduit).
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by
tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at
the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the
light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown
above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the
opposite end of the fluorescent light.

Made in USA Quality Lamp Type

1. Each unit dialectically tested.

2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.

3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.

4. Over-sized, finned ballast housing for 800 mA fixtures provides more
heat dissipation and extends ballast life. Ballast housing easily
accessible and externally mounted. Top and bottom covers secured
with nuts and bolts, instead of threaded through holes, which can be
damaged with dirt.

5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.

6. A wrench is used to unscrew the end caps for relamping the fixture,
while other models require the “tap and knock off” method to loosen the
end cap.

7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
protection.

F24-T5HO – 2000 lumens per bulb, 20,000 hours life, 5000 Kelvin
color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF .98

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

EPL-24-192 Explosion Proof U.L. Ratings
UL Listing: United States - Canada Class 1 Division 1, Groups C and D
Dimensions: W-22.50" L-27" H-8.5 " Class 1 Division 2, Group A,B,C,D
Weight: 57 Lbs Class II Division 1- 2, Groups E,F,G
Total Watts: 192 watts UL 844, 924
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz UL 1598 Marine Type
Total Lumens: T5-HO Bulbs 16000 UL 595 Outdoor Marine Type (Saltwater)
Lamp Life Expectancy: T5-HO Bulbs 20,000 Hours UL listed for Paint Spray Booths*
Efficiency: STD-T5-HO Bulbs 83 Lumens per Watt California Title 24 Compliant
Ambient Operating Temp Range: -30 C to 70 C
Beam Angle: N/A
Color Temp: 5000K
Mounting: Bracket Standard - Pendant Optional
Wiring Hub: 1/2 inch threaded Special Orders- Requirements
U.L Approval: U.S Certificate Canada Certificate Contact us for special requirements
Operating Temp Rating: T6 Rated Toll Free: 1-800-369-6671
Minimum Operating Temp: -30 C Intl: 1-903-498-3363
Maximum Case Temp: 90 C E-mail: [e-mail]

*5 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement. Please click here to see our 5 Year Warranty pamphlet.

Scroll Down to Purchase- Please note: 2 day lead time on this light.

Part #: EPL-24-192 (69033)

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- Dimensional Drawing

- Hi Res Image 1

- Hi Res Image 2

- Hi Res Image 3

- Hi Res Image 4

Page: 5