Larson Electronics EPEXC-5X-12.3-50 User Manual

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Explosion Proof 5 Outlet Extension Cord - Five 20 Amp Outlets - 50 Foot SOOW Chemical Resistant Cord

Part #: EPEXC-5X-12.3-50

Page: 1

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Made in the USA

The Larson Electronics EPEXC-5X-12.3-50 50' Explosion Proof Extension Cord allows operators to safely extend the range of their
explosion proof light or equipment cords beyond the boundaries of the hazardous work area.

These units are constructed of 50 feet of 12/3 SOOW explosion proof cord and are rated at 20 amps of continuous service. The cord is chemical
and abrasion resistant and comes with five inline 20 amp, 2-pole 3-wire explosion proof receptacles installed on one end and a standard
explosion proof plug installed on the other end. This unit enables multiple connections from a single cord.

Click Photos to Enlarge

These explosion proof extension
cords are preconfigured in 125V
(left) or 250V (right). Each unit is
equipped with a 20 amp
explosion proof cord cap and
rated for 20 amps of continual
service. The outlets are a
twistlock design. The deep
recessed contacts in the
receptacle housing prevents
ordinary and wet location plugs
from activating the explosion
proof outlets.

125V 5-20P Explosion Proof
Straight Blade Plug

250V 6-20P Explosion Proof
Straight Blade Plug

Page: 2

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

125V 5-15/20 Explosion Proof
Outlet

We offer this unit in a 125V or 250V configuration. Each receptacle's contacts are deep recessed to avoid accidental contact and will accept
standard non explosion proof plugs that are NEMA 5-20R, or 6-20R compatible although explosion proof plugs must be used to preserve
explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this cord's explosion proof receptacles.
The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug
and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the
highest safety, operators should make connections outside of the hazardous area.
Inter-Compatibility: These cords use T style plugs and will work with non-explosion proof standard receptacles and plugs (NEMA 5-15R, 5-20R,
or 6-20R) but will not work with standard 120V wall outlets. The included plugs and receptacles are cross-interchangeable with Crouse Hind™
part# ENP5201 plugs and receptacles and Hubble-Killiark part# UGP-20231 ACCEPTOR® plugs and receptacles. Any equipment requiring
these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we
have made every effort to ensure cross compatibility correctness.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations
Where Combustible Dust is Present.

Outlet accepts 15A and 20A
Explosion Proof Plugs

Outlet accepts 6-15P and 6-20P
Explosion Proof Plugs

Page: 3

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Specifications / Additional Information

EPEXC-5X-12.3-50 Explosion Proof Extension Cord Plug / Outlet Certifications
Amp Rating: 20 amp Continuous Service Class 1 Div 1 Groups C and D
Dimensions: Cord length-50 Feet Plug-2.78"-L 1.75"-W Class 2 Div 1 Groups E, F and G
Configuration: 3 Pole 2 Wire
Suitable Plug Cable Diameter: .538” to .639”
Wiring: 50' 12/3 SOOW Cable Terminated w/ (1) 5-15P Explosion

Proof Straight Blade Plug and (5) 20 Amp Inline Receptacles

Voltage: 125 Volts or 250 Volts

Receptacle Specs: 5 Inline Receptacle
Configuration: 3 Pole 2 Wire
Materials: Copper Free Aluminum
Dimensions: 3"-W X 5.69"-D X6.13"-H
Mating Plugs: ****EPP-15A, EPP-20-A**** Special Orders- Requirements
Finish: Epoxy Powder Coat Contact us for special requirements

Toll Free: 1-800-369-6671
Intl: 1-903-498-3363

U.L. Certification
*3 year warranty replacement on this LED light (or LED bulbs for light

fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement. Please click here to see our 3 Year Warranty pamphlet.

Scroll Down to Purchase-

E-mail: [e-mail]

Part #: EPEXC-5X-12.3-50 (68699)

Page: 4

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Page: 5

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

Links (Click on the below items to view):

- Hi-Res Image 1

- Hi-Res Image 2

- Hi-Res Image 3

- Hi-Res Image 4

Page: 6

Larson Electronics LLC www.LarsonElectronics.com

9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]

- Hi-Res Image 5

- Hi-Res Image 6

- Hi-Res Image 7

- Hi-Res Image 8

- Hi-Res Image 9

- Hi-Res Image 10

Page: 7