Larson Electronics ATEX-EHL-1123-LED-50-EPP Operating Instructions Manual

EN
EN
EN
EN

Operating instructions

EN
EN

EN

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Inspection Light LED

ATEX-EHL-1123-LED-50-EPP

EN
EN
EN
EN
EN

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Contents

1 General Information ............................................................................................3

1.1 Manufacturer .......................................................................................................3

1.2 Information regarding the operating instructions .................................................3

1.3 Conformity with standards and regulations .........................................................3

2 Explanation of the symbols .................................................................................3

2.1 Symbols in these operating instructions .............................................................3

2.2 Warning notes .....................................................................................................4

2.3 Symbols on the device ........................................................................................4

3 Safety notes ........................................................................................................4

3.1 Operating instructions storage ............................................................................4

3.2 Safe use ..............................................................................................................5

3.3 Modifications and alterations ..............................................................................5

4 Function and device design ................................................................................5

5 Technical data .....................................................................................................6

6 Transport and storage .........................................................................................7

7 Mounting and installation ....................................................................................8

7.1 Dimensions / fastening dimensions ....................................................................8

7.2 Mounting / dismounting, operating position ........................................................9

7.3 Installation ...........................................................................................................9

8 Commissioning .................................................................................................10

9 Maintenance and repair ....................................................................................10

9.1 Maintenance .....................................................................................................10

9.2 Repair ...............................................................................................................11

9.3 Returning the device .........................................................................................11

10 Disposal ............................................................................................................11

11 Accessories and Spare parts ...........................................................................11

EN
EN
EN

2

Inspection Light LED
ATEX-EHL-1123-LED

1 General Information

General Information

EN
EN

1.1 Manufacturer

Larson Electronics, LLC.
9419 US-HWY 175
Kemp, Texas 75143
U.S.A.

Phone:
Fax:
Internet:
E-mail:

800-369-6671
903-498-3364
www.larsonelectronics.com
[e-mail]

1.2 Information regarding the operating instructions

ATEX-EHL-1123-LED-50-EPPID-No.:

The original instructions are the English edition.
They are legally binding in all legal affairs.

1.3 Conformity with standards and regulations

See certificates and EC Declaration of Conformity.

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

2 Explanation of the symbols

2.1 Symbols in these operating instructions

Symbol Meaning

Tips and recommendations on the use of the device

General danger

Danger due to explosive atmosphere

Danger due to energised parts

EN
EN
EN
EN
EN
EN

Larson Electronics, LLC.
[phone] | [e-mail]
www.LarsonElectronics.com

Inspection Light LED

TEX-EHL-1123-LED

A

3

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Safety notes

2.2 Warning notes

Warning notes must be observed under all circumstances, in order to minimize the risk
due to construction and operation. The warning notes have the following structure:

• Signalling word: DANGER, WARNING, CAUTION, NOTICE

• Type and source of danger/damage

• Consequences of danger

• Taking countermeasures to avoid the danger/damage

DANGER

Danger to persons
Non-compliance with the instruction results in severe or fatal injuries to
persons.

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

WARNING

Danger to persons
Non-compliance with the instruction can result in severe or fatal injuries to
persons.

CAUTION

Danger to persons
Non-compliance with the instruction can result in light injuries to persons.

NOTICE

Avoiding material damage
Non-compliance with the instruction can result in material damage to the device and / or
its environment.

2.3 Symbols on the device

Symbol Meaning

CE marking according to the currently applicable directive.

05594E00

According to marking, device approved for hazardous areas.

02198E00

3 Safety notes

3.1 Operating instructions storage

• Read the operating instructions carefully and store them at the mounting location of
the device.

• Observe applicable documents and operating instructions of the devices to be
connected.

4

Inspection Light LED
ATEX-EHL-1123-LED

Larson Electronics, LLC.
[phone] | [e-mail]
www.LarsonElectronics.com

3.2 Safe use

• Read and observe the safety notes in these operating instructions!

• Observe characteristic values and rated operating conditions on the rating and data
plates!

• Observe additional information plates on the device!

• Use the device in accordance with its intended and approved purpose only!

• We cannot be held liable for damage caused by incorrect or unauthorized use or by
non-compliance with these operating instructions.

• Before installation and commissioning, make sure that the device is not damaged!

• Work on the device (installation, maintenance, overhaul, repair) may only be carried
out by appropriately authorized and trained personnel.

3.3 Modifications and alterations

Function and device design

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Explosion hazard due to modifications and alterations to the device!
Non-compliance results in severe or fatal injuries.

• Do not modify or alter the device. No liability or warranty for damage
resulting from modifications and alterations.

4 Function and device design

The device can be used in hazardous areas of Zones 1, 2, 21, 22 and in the safe area.
The inspection light 6149 is designed for use as a portable workplace light. The optional
mounting brackets allow the inspection light to also be used as a machine light.

Danger if used in aggressiv ambient conditions!
The explosion protection is impaired!

• Do not use when exposed to kerosene, ammonia and phosphorus
vapour.

• The enclosure can be damaged.

Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.

• Use the device only according to the operating conditions described in
these operating instructions.

DANGER

WARNING

DANGER

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Larson Electronics, LLC.
[phone] | [e-mail]
www.LarsonElectronics.com

Inspection Light LED
ATEX-EHL-1123-LED

5

EN
EN

Technical data

5 Technical data

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Explosion Protection
Global (IECEx)

Gas and dust IECEx PTB 07.0018

Ex d IIC T* Gb
Ex tb IIIC T* °C Db
* temperature classes and surface temperatures see below

Europe (ATEX)

Gas and dust PTB 07 ATEX 1009

E II 2 G Ex d IIC T* Gb
E II 2 D Ex tb IIIC T* °C Db
* temperature classes and surface temperatures see below

Certifications and certificates

Certificates IECEx, ATEX, Brazil (INMETRO), Kazakhstan (TR), Russia (TR), Belarus (TR)

Surface temperature and temperature class

Version Temperature class Surface temperature

ATEX-EHL-1123..-....

T4 100 °C

EN
EN
EN
EN
EN
EN
EN

echnical Data

T
Electrical data

Version
Rated operational

voltage
Nominal operational

current

Luminous
characteristics

Version 6149/2-5 (110 ... 240 V)
Lamps LED
Luminous flux approx. 1,000 lm
Luminous Intensity

(110 ... 240 V) 110 ...
240 (± 10 %) V AC /
DC, 50 / 60 Hz

110 V 0.13 A
240 V 0.07 A

285 lux in 1 m distance

Larson Electronics, LLC.

6

Inspection Light LED
ATEX-EHL-1123-LED

[phone] | [e-mail]
www.LarsonElectronics.com

echnical Data

T

Transport and storage

EN
EN

Ambient conditions

Ambient temperature

Mechanical data

Degree of protection IP66 / IP67
Protection class II
Material

Enclosure tube Polycarbonate
Grip Aluminium
Sealing cap Aluminium
Rubber grip NBR / PVC (EPDM)
Suspension hook NBR / PVC (EPDM)

Mounting / Installation

Cable glands CMP cable gland for rubber case-, Thermflex- and wire mesh lead
Connection line

Cable 6149/2-2

12V)

(

H07RN-F;
2 x 1,5 mm

HXSLHXÖ-J;
2 x 1,5 mm

(N)SSHÖU 1kV;
2 x 1,5 mm

RADOX, MFH-S B;
2 x 1,5 mm

The luminaire must be switched on above -40 °C.

Designation Application

H07RN-F, d 8.8 ... 11 mm, 2 x 1.5 mm

2

2

2

2

T4T6-40 ... +40 °C -40 ... +60 °C

T4T6-40 ... +40 °C -40 ... +60 °C

T4T6-40 ... +40 °C -40 ... +60 °C

T4T6-40 ... +40 °C -40 ... +60 °C

6149/2-3

24 ... 48 V)

(

-40 ... +40 °C

-40 ... +40 °C

-40 ... +40 °C

-40 ... +40 °C

2

Standard

6149/2-5

110 ... 240 V)

(

-30 ... +60 °C

-30 ... +40 °C

-30 ... +60 °C

-30 ... +40 °C

-30 ... +60 °C

-30 ... +40 °C

-30 ... +60 °C

-30 ... +40 °C

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Gifas Thermflex cable, HXSLHXÖ-J, d 7.7 ... 10 mm,
2 x 1.5 mm

(N)SSHÖU 1kV, d 8.7 ... 9 mm, 2 x 1.5 mm

RADOX, MFH-S B, d 6 ... 7 mm, 2 x 1.5 mm

6 Transport and storage

• Transport and store the device only in the original packaging.

• Store the device in a dry place (no condensation) and vibration-free.

• Do not drop the device.

Larson Electronics, LLC.
[phone] | [e-mail]
www.LarsonElectronics.com

2

2

2

Inspection Light LED
ATEX-EHL-1123-LED

Voltage-proof up to
1kV

Offshore

7

EN

595 23,43[ ]

Ø

04

Ø[

]75,1

Ø

25

Ø[

]50,2

Ø

62

[Ø

2,44]

Ø

04

Ø[

]75,1

Ø

25

Ø[

]50,2

595 23,43[ ]

Ø

62

[Ø

2,44]

4

Ø

]51,3[ 08

07,21

]05,0[

[ 0,16]

Ø

]64,3[ 88

07,21

]05,0[

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Mounting and installation

7 Mounting and installation

DANGER

Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.

• Carry out installation strictly according to the instructions and national
safety and accident prevention regulations to maintain the explosion
protection.

• Select and install the electrical device so that explosion protection is not
affected due to external influences, i.e. pressure conditions, chemical,
mechanical, thermal and electric impact such as vibration, humidity and
corrosion (see IEC/EN 60079-14).

• The device must only be installed by trained qualified personnel who is
familiar with the relevant standards.

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

7.1 Dimensions / fastening dimensions

Dimensional Drawings (All Dimensions in mm [inches]) - Subject to Alterations

180 [7,09]

302 11,89[ ]

Inspection light without wire guard Inspection light with wire guard

Ø

25

[Ø

15 [0,59]

0,98]

180 [7,09]

302 11,89[ ]

03714E00 04925E00

54,50 [2,15]

54,50 [2,15]

00E7294000E62940

Mounting bracket Mounting bracket and

magnet

8

pection Light LED

Ins
ATEX-EHL-1123-LED

Larson Electronics, LLC.
[phone] | [e-mail]
www.LarsonElectronics.com

7.2 Mounting / dismounting, operating position

1

4

360 mm / 14,17 "

Mounting and installation

EN
EN

7.2.1 Wire Guard Assembly

7.2.2 Wall mounting

EN

• remove the suspension hook (4) from
the enclosure tube (2).

• push the wire guard (3) over the
enclosure tube.

• push the first coil of the wire guard

3

2

over the lip of the grip (1)

• push the suspension hook back onto
the enclosure tube and push the last
coil of the wire guard over the lip of
the suspension hook when doing so.

05337E00

• wire guard is now fitted.

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

• fix the mounting brackets to the
wall at a spacing distance of
360 mm.

• clip the inspection light into the

EN
EN
EN

mounting brackets.

• wall mounting is complete.

EN
EN

7.3 Installation

7.3.1 Electrical connections

Danger due to wrong plugs!
The explosion protection is impaired!

• Only use plugs, which are approved for use in the relevant zone.

The light is delivered with a connection cable. A standard CE connector must
be used for operation. When selecting the connector observe the IP level of
protection!

All versions can be operated with a cable length of up to 100 m.

It is not permitted to extend the connection cable.

05342E00

WARNING

EN
EN
EN
EN
EN
EN

• Installation of the plugs should be performed in accordance with the corresponding
operating instructions.

Larson Electronics, LLC.
[phone] | [e-mail]
www.LarsonElectronics.com

Inspection Light LED
ATEX-EHL-1123-LED

9

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Commissioning

8 Commissioning

DANGER

Explosion hazard due to incorrect installation!
Non-compliance results in severe or fatal injuries.

• Check the device for proper installation and function before
commissioning.

• Comply with the national regulations.

• Make sure that the plug is fitted correctly.

• Check that the cable is clamped properly.

• Inspect cable glands for damage.

• Check the light for visible damage.

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

9 Maintenance and repair

WARNING

Risk of electric shock or malfunctioning of the device due to unauthorized
work!
Non-compliance can result in severe injuries and material damage.

• Work performed on the device must only be carried out by appropriately
authorized and qualified electricians.

9.1 Maintenance

Observe the relevant national regulations in the country of use.

• Determine the type and extent of inspections in compliance with the relevant national
regulations.

• Adapt inspection intervals to the operating conditions.

The following tests and measures must be carried out during regular maintenance.

10

C

heck Measures

the permissible ambient temperature If exceeding the permissible ambient

temperature or falling below the device
must be taken out of operation.

the enclosure components for formation of
cracks and damage.

Replace the exchangeable enclosure
components. If the enclosure components
are non-exchangeable, the device must be
taken out of operation.

si ecived eht fIesu dednetni sti not used according to its
intended use, it must be taken out of
operation.

Larson Electronics, LLC.
Inspection Light LED
ATEX-EHL-1123-LED

[phone] | [e-mail]

www.LarsonElectronics.com

9.1.1 Cleaning

• Clean the device only with a cloth, brush, vacuum cleaner or similar items.

• When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
cleaning agents.

• Do not use aggressive detergents or solvents.

Disposal

EN
EN
EN
EN
EN

9.2 Repair

Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.

•

Repair work on the devices must be performed only by

manufacturer.

9.3 Returning the device

Contact manufacturer.

10 Disposal

• Observe national and local regulations and statutory regulation regarding disposal.

• Separate materials when sending it for recycling.

• Ensure environmentally friendly disposal of all components according to the statutory
regulations.

DANGER

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

11 Accessories and Spare parts

Malfunction or damage to the device due to the use of non-original components.
Non-compliance can result in material damage.

• Use only original accessories and spare parts.

For accessories and spare parts, contact manufacturer or see
www.larsonelectronics.com.

EN
EN

NOTE

EN

Larson Electronics, LLC.
[phone] | [e-mail]
www.LarsonElectronics.com

Inspection Light LED

TEX-EHL-1123-LED

A

11