Page 1
REMOVING DRAWERS
REMOVING DRAWERS
STEP 1: DETERMINE WHICH OF THE TWO BASIC TYPES OF SLIDE,GLIDE/STOP SYSTEMS ARE USED
TO MOUNT DRAWER INSIDE OF CASE HOLE. BOTTOM MOUNT OR SIDE “FULL EXTENSION GLIDES”.
BOTTOM MOUNT: TO REMOVE A DRAW ER UTILIZING THE
BOTTOM MOUNT GLIDE SYSTEM, PULL THE DRAWER OUT
UNTIL RESISTANCE CAUSES THE DRAWER TO STOP. THIS IS
WHERE THE GLIDE WHEEL AND STOPPER SQUEEZE THE
A
TRACK HEAD. ONCE DRAWER IS PULLED ALL THE WAY
FORWARD UNTIL IT STOPS, PLACE A HAND AGAINST THE
CABINET AND EXERT EVEN MORE FORCE VERY QUICKLY. THE
DRAWER WILL THEN PULL FREE.
FULL EXTENSION GLIDES: PULL THE DRAWER ALL
THE WAY FORWARD UNTIL THE LOCKS ENGAGE.
FIND THE LOCKING TABS ON EACH SIDE. ONE WILL
SQUEEZE DOWNWARD AND THE OTHER WILL
SQUEEZE UPWARD. ACTIVATE THE TAB LEVERS BY
PINCHING THEN PULL THE DRAWER THE FREE OF
THE CABINET. YOU MUST CONTINUE TO PINCH THE
TABS UNTIL THE DRAW ER IS FREE OF THE
CABINET.`
Loading...