Page 1
ASSEMBLY INSTRUCTION
DESCRIPTION : RECT DINING TABLE
Thank You for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have
some loose inside the carton during shipment. Identify and count all parts and compare with the parts List Below.
List of hardware For 1 Set
Flat Washer
x 22mm
Spring Washer
'
Hex. Com Bolt
k x 2 b
Spanner
12.8mm
(X ) Turn the under s-de of the Table Top over and
place it on a clean and smooth surface such as
rug or carpet to avoid the Table Top from being
scratched.
Assembly Completed!!
01
^¡¡¡^
02
03
Unlock the Cam Lock under J
the table before Center Leaf i
assembled then lock it. /
Table Top
Center Leaf
Table Leg
1
2
4
©
©
©
©
8
8
8
1
f 2 | Fix the turned Leg to the comer of the Apron
with the Flat Washer,Spnng Washer and Hex
Nut using the Spanner to tighten it
[ V | Turn the assembled Table over carefully.pull
— the Table Top to bolt two sides then lift up the
Center Leaf from the compartment and turn the
Center Leaf to open to lie on afpor.
K
4 ,
f 4 [ Pusfh the side Center Top at bolt end close to
the Table Leaf until it leaves no empty spaces
TT
u
. ‘yÿ-vf i
III
P AGF. 1 O F 1
Loading...