ASSEMBLY INSTRUCTIONS
Parts List
Pieces
A
B
C
D
E
F
G
H
I
J
1
2
3
4
5
6
7
8
Schema
(M8)
(M8*5 5)
(M8* 35 )
Descri ption
Screw
Flat washer
Lock washer
Nut
Alu plate
Nut cap
Wrench
PE cap
Seat
Base
Alu plate
Spring plate
Screw
Flat washer
Lock washer
Nut
TR
QTY
4
4
4
4
4
4
1
Factory
already
assembled
1
1
2
2
4
4
4
4
1
WARNING!WARNING!
This chair has a 250 lbs weight capacity.
Hang cushion over chair frame to dry if it gets wet to prevent mold/mildew.
ATTENTION:ATTENTION:
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip threads or break the part.
3. DO NOT use power tools.
4. Check parts against the parts list to make sure you have all parts needed for
proper assembly.
5.Familiarize yourself with the inventory of parts and the accompanying illustrations
to ensure safe and proper assembly.
Made in China
ASSEMBLY INSTRUCTIONS
ATTENTION:ATTENTION:
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip threads or break the part.
3. DO NOT use power tools.
4. Check parts against the parts list to make sure you have all parts needed for proper assembly.
5.Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe
and proper assembly.
Assembly steps:Assembly steps:
1. Turn the table top(A) upside down on the soft clean surface. Loosely attach the legs(C) to the table top(A)
with bolts(F), big flat washers(G), lock washers(H) nuts(E)and nut caps(L)using the wrench(N).
Tighten the bolts at this time.
2. Loosely attach the center loops(C) to the legs(C). Note that the recessed end of plate goes on the leg last
at each corner. Secure using small flat washers(I), small lock washers(J), bolts(D) and PVC covers(K)
using the wrench(M).
3. Tighten all the bolts and nuts completely. DO NOT over tighten the nuts and bolts.
4. Turn the table onto its legs and put center tray on the table top. Use the adjuster feet to level the tables.
Warning : please not using acid or alkaline washing liquid to clean the product.
11
C
Parts list Parts picture Description
A
B
C
O
DO NOT OVER TIGHTEN
*
Table top
Center loop
Table leg
Adjustable
Foot
33
L
E
H
G
F
A
Factory
already
assembled
Made in China
Qty
4
K
22
Parts list Parts picture Description
D
1
E
F
G
2
H
I
J
K
L
M
N
NO POWER TOOLS
*
(M6*35)
(M8)
(M8*30)
(M8)
(M8)
(M6)
(M6)
(M8)
B
Bolt
Nut
Bolt
Big flat washer
Big lock washer
Small flat washer
Small lock washer
PVC cover
Nut cap
Wrench
Wrench
D
J
I
Qty
8
4
4
4
4
8
8
8
4
1
1
NO SOCKET DRIVERS
*
1. Before removing all protective packing material and
position base on floor. Attach the seat(I) onto the base
(J)with Alu plate as the picture, then assemble
using bolt(A), flat washers(B), lock washers(C), nuts(D)
and nut cap(F). Be sure to the arrows face to front.
2. Tighten all the bolts and nuts. Test the swivel rocker
gently. If the rocker does not rock properly, double
check the assembly procedure.
3. Remove all protective packaging.
Warning : DO NOT use acid or alkaline
J
washing liquid to clean the product.
F
D
C
B
E
I
A
H: This part hav e been asse mbled by
facto ry alread y.
DO NOT OVER TIGHTEN
*
NO SOCKET DRIVERS
*
Made in China
NO POWER TOOLS
*
Loading...