ASSEMBLY INSTRUCTIONS
ATTENTION:ATTENTION:
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip threads or break the part.
3. DO NOT use power tools.
4. Check parts against the parts list to make sure you have all parts needed for proper assembly.
5.Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe
and proper assembly.
Assembly steps:Assembly steps:
1.Loo sel y attach th e 4 legs (C) to the ta ble top wit h bolts(D),f lat washe rs( E),lock w ashers(F), nuts(G)
and nut c aps (H).Do no t over-ti ght en.
2.Loosely attach each of the 4 center plates(B&B1) to the legs. Note that the recessed end of each
plate goes on the leg last at each corner. Secure using flat washers, lock washers, nuts(G) and nut
caps(H)(show as the figure).
3.Tighten all the bolts and nuts completely. DO NOT over tighten the nuts and bolts.
4.Turn the table onto its legs and use the adjuster feet to level the tables.
Warning : please do not use harsh chemicals to clean the table.
H
11
C
A
G
F
E
D
33
Q
Part s list Part s pictu re Desc ripti on
A
B
B1
C
Q
DO NOT OVER TIGHTEN
*
Table top
Center plate
Center plate
Table leg
Adjustable
Foot
Q'ty
1
2
Part s list Part s pictu re
D
E
F
2
G
4
H
Factory
already
assembled
Made in China
I
22
NO POWER TOOLS
*
B
B1
Desc ripti on
Screw
Flat washer
Lock washer
Nut
Nut cap
Wrench
Q'ty
4
12
12
12
12
1
NO SOCKET DRIVERS
*
Loading...