Assembly Instruction
Parts
Description
Quantity
Parts
Description
Quantity
Chair
Bucket
1 Bolt
4
Base
1
Flat
Washer
4
Nut
4
Warning: Do not force components and over tighten the nuts during assembly.
1. Identify all parts packed in carton against the part list. Remove all protective material carefully
and avoid cutting the surface of the furniture while removing the wrapped material.
2. Place the base on a non-abrasive, flat surface.Open the hardware bag and take out the
hardware.
3. Place the base beneath the support bar.Align the holes on the support bar, the holes on the
plate .Glide the bolts through the holes. Fasten the flat washers and nuts as the diagram show
below.
4. Tighten all the bolts and nuts .
Loading...