C
D
E
F1
D
D
H
G
F
D
I
G
D
G
F2
C
L
D
C
E
B Frame
C Short
Pole
J
L Cap
A Screws
D Stud bolt
E Shade
G Long
Pole
M
B
A
1.Carefully unpack all parts from the
packaging and place them on a flat/
smooth surface. Be sure to remove
all the packaging materials from the
lamp. Insert and tighten screw (A)
into frame(B) and short pole(C). Then
slide the shade(E) into short pole(C).
2.Put the lamp holder (F1) on short
pole(C) and tighten by stud bolt (D)
Please note: Make sure the lamp holder
(F1) is tightly attached on short pole(C)
before tighten stud bolt(D)
H Board I Board
K Clip
M Fabric
3.Screw and tighten long pole(G)
and Board(H) by Screw(D)
Assembly Instruction
4.Screw and tighten long Pole(G)
and Board (I) by screw(D)
5.Screw short Poles(C) on Board(I), slide the shade(E) into short
pole(C) then insert and tighten screw (D) into lamp holder(F2)
and short pole(C). Place fabric(M) on legs(J) and tighten on lamp
holder(F2)
6.Turn the lamp upside down, put cap(L)
over screws at top frame(B). Then attach
the clip(K) on the pole to secure the
wire , your lamp is ready to use.
Loading...